29.120.10 - Conduits for electrical purposes
ICS 29.120.10 Details
Conduits for electrical purposes
Installationsrohre
Conduits a usage electrique
Inštalacijske cevi za električne namene
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 29.120.10 - Conduits for electrical purposes
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
- 1 (current)
- 2
- 3
- 4
- 5
- Standard13 pagesEnglish and French languagesale 15% off
IEC 61084-2-2:2017 specifies requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary for the electrically protective separation, of insulated conductors, cables and possibly other electrical equipment in electrical and/or communication systems installations. The maximum voltage of these installations is 1 000 V AC and 1 500 V DC.
These systems are intended for mounting underfloor, flushfloor or onfloor.
This document does not apply to CTS/CDS which are intended to be fixed to the wall and supported by the floor.
This document does not apply to conduit systems, cable tray systems, cable ladder systems, power track systems or equipment covered by other standards.
This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- classification;
- construction;
- mechanical and electrical properties.
This International standard is to be used in conjunction with IEC 61084-1:2017.
- Standard62 pagesEnglish and French languagesale 15% off
- Standard124 pagesEnglish and French languagesale 15% off
IEC 61084-2-4:2017 specifies requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary for the electrically protective separation, of insulated conductors, cables and possibly other electrical equipment in electrical and/or communication systems installations. The maximum voltage of these installations is 1 000 V AC and 1 500 V DC.
Service poles and service posts are intended to be mounted in free space and in contact with mounting surface(s) only at one or two ends, where the word “mounted” means fixed or placed on the floor with a weighted base or linked to a mounting surface through a flexible component.
NOTE Service poles and service posts can also be part of a CTS/CDS intended for wall or ceiling mounting covered by IEC 61084-2-1 or floor mounting covered by IEC 61084-2-2 and are then also tested according to said parts, as appropriate.
This international standard does not apply to conduit systems, cable tray systems, cable ladder systems, powertrack systems or equipment covered by other standards.
This second edition cancels and replaces the first edition published in 1996. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- classification;
- construction;
- mechanical and electrical properties.
This International Standard is to be used in conjunction with IEC 61084-1:2017.
- Standard61 pagesEnglish and French languagesale 15% off
- Standard122 pagesEnglish and French languagesale 15% off
IEC 61084-2-1:2017 specifies requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary for the electrically protective separation, of insulated conductors, cables and possibly other electrical equipment in electrical and/or communication systems installations. The maximum voltage of these installations is 1 000 V AC and 1 500 V DC.
These systems are intended for mounting on walls and/or ceilings. They can be embedded, installed in a flush or semi-flush state, surface mounted or mounted away from the surface using fixing devices.
This document does not apply to conduit systems, cable tray systems, cable ladder systems, power track systems or equipment covered by other standards.
This second edition cancels and replaces the first edition published in 1996. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- classification;
- construction;
- mechanical and electrical properties.
This International Standard is to be used in conjunction with IEC 61084-1:2017.
- Standard49 pagesEnglish and French languagesale 15% off
- Standard105 pagesEnglish and French languagesale 15% off
- Standard9 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
IEC 61084-2-3:2017 specifies requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary for the electrically protective separation, of insulated conductors, cables and possibly other electrical equipment in electrical and/or communication systems installations. The maximum voltage of these installations is 1 000 V AC and 1 500 V DC.
Slotted cable trunking systems are intended for mounting inside cabinets in electrical and/or communication system installations.
This document does not apply to conduit systems, cable tray systems, cable ladder systems, power track systems or equipment covered by other standards.
This International standard is to be used in conjunction with IEC 61084-1:2017.
- Standard36 pagesEnglish and French languagesale 15% off
- Standard74 pagesEnglish and French languagesale 15% off
To cover requirements for boxes and enclosures with provision for suspension means
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
To cover requirements for boxes and enclosures with provision for suspension means
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
To cover requirements for boxes and enclosures with provision for suspension means
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
To cover requirements for boxes and enclosures with provision for suspension means
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
To cover requirements for boxes and enclosures with provision for suspension means
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
To cover requirements for boxes and enclosures with provision for suspension means
- Amendment6 pagesEnglish languagesale 10% offe-Library read for1 day
To cover requirements for boxes and enclosures with provision for suspension means
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
To cover requirements for boxes and enclosures with provision for suspension means
- Amendment6 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies particular requirements and tests for conduit systems buried underground for the protection and management of insulated conductors and/or power cables or communication cables that are installed by different techniques, for example, blowing (including floating), pulling or pushing directly after installation of the conduit or during its expected performance time.
This standard is applicable to all conduits with circular cross section manufactured individually or manufactured as a part of an assembly
NOTE Reference is made to other documents for additional material requirements where applicable.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies general requirements and tests for conduit systems buried underground for the protection and management of insulated conductors and/or power cables or communication cables.
This European Standard is applicable to conduits with circular cross section.
The requirements described in this standard are applicable to all conduits
- installed individually or installed as a part of an assembly;
- where the cable is installed by pulling or pushing.
prEN 50626-2 specifies particular requirements and tests that are required for special applications.
NOTE Examples of special applications include special pipe installation techniques, and alternative cable installation techniques are trenchless installation.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies particular requirements and tests for conduit systems buried underground for the protection and management of insulated conductors and/or power cables or communication cables that are installed by different techniques, for example, blowing (including floating), pulling or pushing directly after installation of the conduit or during its expected performance time. This standard is applicable to all conduits with circular cross section manufactured individually or manufactured as a part of an assembly NOTE Reference is made to other documents for additional material requirements where applicable.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
To cover requirements for boxes and enclosures with provision for suspension means
- Amendment16 pagesEnglish languagesale 10% offe-Library read for1 day
To cover requirements for boxes and enclosures with provision for suspension means
- Amendment16 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61537:2023 specifies requirements and tests for cable tray systems and cable ladder systems intended for the support and accommodation of cables and possibly other electrical equipment in electrical and/or communication systems installations. Where necessary, cable tray systems and cable ladder systems can be used for the arrangement of cables into groups.
This document does not apply to conduit systems, cable trunking systems and cable ducting systems or to any current-carrying parts.
This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
new, repositioned and renumbered figures,
revised classification for corrosion,
revised SWL test types and procedures,
new tests for lengths mounted vertical running horizontal and mounted vertical running vertical,
tests for support devices: cantilevers, pendants, C shape ceiling supports and trapeze systems,
new and revised annexes including use of tray as a protective earth conductor.
- Standard305 pagesEnglish and French languagesale 15% off
This document provides test methods for the measurement of the following electromagnetic characteristics of lengthwise cable management systems like conduit systems according to EN 61386 series, cable trunking systems and cable ducting systems (CTS/CDS) according to EN 50085 series and cable tray and cable ladder systems according to EN 61537:
- shielding effectiveness of magnetic field,
- transfer impedance.
This document also provides guidance on how these characteristics can be declared and may be used.
- Technical specification27 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides test methods for the measurement of the following electromagnetic characteristics of lengthwise cable management systems like conduit systems according to EN 61386 series, cable trunking systems and cable ducting systems (CTS/CDS) according to EN 50085 series and cable tray and cable ladder systems according to EN 61537: - shielding effectiveness of magnetic field, - transfer impedance. This document also provides guidance on how these characteristics can be declared and may be used.
- Technical specification27 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61169-4:2008(E) provides information and rules for the preparation of detail specifications (DS) for type 7-16 R.F. coaxial connectors with screw lock. It describes the interface dimensions for general purpose grade 2 connectors, dimensional details for standard test connectors, grade 0, together with gauging information and the mandatory tests selected from QC 22000 (IEC 61169-1), applicable to all DS relating to type 7-16 connectors.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62275:2018 specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations. This third edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) consideration of adhesive fixing devices, b) revised and updated normative references, c) modified definitions for metallic and composite cable ties, d) new definitions, e) improvement of test procedures, f) new figures for typical arrangement of test assembly for fixing devices and for integral fixing devices.
- Standard45 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62275:2022 specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices as a means used for managing or securing the wiring systems in electrical installations. Cable ties and associated fixing devices can also be suitable for other applications, such as support of wiring systems, and where so used, additional requirements can apply. This fourth edition cancels and replaces the third edition published in 2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- scope clarification,
- new definitions,
- deletion of the exception for the stabilization of the moisture content,
- possibility to carry out tensile strength tests with dead weights,
- differentiation of rubber and acrylic adhesive fixings,
- clarification for mechanical testing of integral devices,
- clarifications on Table 6,
- clarifications in 9.1,
- the minimum installation temperature test for cable ties is carried out only when the declared minimum temperature is lower than 0 °C,
- a requirement that metallic cable ties be classified according to 6.2.3,
- definition of colours to be tested for contribution to fire,
- addition of a "some countries" note in Clause 10,
- clarification of the mounting of fixing devices in the resistance to ultraviolet light test,
- clarification on the testing of integral devices in the resistance to ultraviolet light test.
- Standard128 pagesEnglish languagesale 15% off
- Standard83 pagesEnglish and French languagesale 15% off
IEC 61169-4:2008(E) provides information and rules for the preparation of detail specifications (DS) for type 7-16 R.F. coaxial connectors with screw lock. It describes the interface dimensions for general purpose grade 2 connectors, dimensional details for standard test connectors, grade 0, together with gauging information and the mandatory tests selected from QC 22000 (IEC 61169-1), applicable to all DS relating to type 7-16 connectors.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This document, EN 50642, specifies a method for the determination of the content of halogens in Cable Management System (CMS) components or products made of polymeric material(s). The determination is made by combustion and subsequent analysis of the combustion product by Ion Chromatography. This document specifies how CMS components or products can be declared as halogen free. This document is for environmental performance only.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the content of halogens in Cable Management System (CMS) products or system components made completely or partly of combustible material(s). The determination is made by combustion and subsequent analysis of the combustion product by Ion Chromatography. This document specifies how CMS products or system components can be declared as halogen free. This document is for environmental performance only. Compliance with this document does not imply the absence of toxicity, corrosivity or opacity of produced smoke, or other reaction to fire characteristics. If any of these characteristics are to be evaluated, the appropriate standards can be used.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the content of halogens in cable
management system (CMS) products or system components made completely or partly of
combustible material(s). The determination is made by combustion and subsequent analysis of
the combustion product by ion chromatography. This document specifies how CMS products or
system components can be declared as halogen-free.
This document is for environmental performance purposes only.
Compliance with this document does not imply the absence of toxicity, corrosivity or opacity of
produced smoke, or other reaction to fire characteristics. If any of these characteristics are to
be evaluated, the appropriate standards can be used.
The detection limit of this test method is typically 0,025 g of halogen per kg (0,002 5 %).
Halides insoluble in aqueous solution present in the original sample or produced during the
combustion step are not determined by this method.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 63355:2022 specifies a method for the determination of the content of halogens in cable management system (CMS) products or system components made completely or partly of combustible material(s). The determination is made by combustion and subsequent analysis of the combustion product by ion chromatography. This document specifies how CMS products or system components can be declared as halogen-free.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
2018-11-02 - assessment is now 'compliant', BT route to be followed to adress annex ZZ
2018-08-13: non complinat assessment
2018-05-18 - Sent to HAS
2018-03-22 - TC request to BT to keep ratification pending until Annex ZZ is available
(TC213 Plenary decision to prepare Annex ZZ and associated risk assessment for submission to CCMC and to update BT (See Decision 2 in TC213/Sec1214/RM).
2017-05-16 - Cannot allocate for publication due to missing assessment from Consultant.
2016-12-12 - Annex ZZ delivered by TC and to be sent to Consultant when FDIS starts and included in lt file for NC's voting period.
- Amendment13 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 63355:2022 specifies a method for the determination of the content of halogens in cable management system (CMS) products or system components made completely or partly of combustible material(s). The determination is made by combustion and subsequent analysis of the combustion product by ion chromatography. This document specifies how CMS products or system components can be declared as halogen-free.
- Standard32 pagesEnglish and French languagesale 15% off
This document specifies requirements and tests for conduit systems with circular cross section buried underground for the protection and management of insulated conductors and/or power cables or communication cables installed individually or installed as a part of an assembly where the cable is installed by pulling or pushing. This document does not include requirements for leak-tightness according to EN ISO 13259 and performance time. NOTE 1 EN 50626 2 specifies requirements and tests for performance time and leak-tightness for solid wall conduit systems made of PE, PP and PVC-U buried underground where the cables are installed by blowing or floating or conduits are installed by trenchless methods. NOTE 2 It is the responsibility of the purchaser or specifier to take into account any relevant national regulations and installation practices or codes when selecting the products to be installed, based on the characteristics specified in this document.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
2021-04-20: amdt to allow citation of main standard - when pos assessed to request BT approval
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
2021-04-20: amdt to allow citation of main standard - when pos assessed to request BT approval
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
This part of IEC 61386 specifies the requirements for pliable conduit systems including
self-recovering conduit systems.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This part of IEC 61386 specifies the requirements for flexible conduit systems.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This part of IEC 61386 specifies the requirements for rigid conduit systems.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
2020-05-22: This prAA represents common mods to prEN IEC 61386-22 (PR=71035)
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
2020-05-22: This prAA represents common mods to prEN IEC 61386-23 (PR=71030)
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
2020-05-22: This prAA represents common mods to prEN IEC 61386-21 (PR=71028)
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
2019-08-27 PC: sent for LVD assessment
- Amendment12 pagesEnglish languagesale 10% offe-Library read for1 day
Clause 1 of IEC 61386-1:2008 is applicable, except as follows: Addition: This part of IEC 61386 specifies the requirements for pliable conduit systems including self-recovering conduit systems.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
Clause 1 of IEC 61386-1:2008 is applicable, except as follows: Addition: This part of IEC 61386 specifies the requirements for rigid conduit systems.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
2021-12-15: formal rejection from EC, link 'candidate for citation' temporary removed
2020-05-22: This prAA represents common mods to prEN IEC 61386-23 (PR=71030)
2021-05-07: on hold in order to incorporate SNCs
2021-06-21: SNCs approved by BT, ready for publication
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
2021-12-15: formal rejection from EC, link 'candidate for citation' temporary removed
2020-05-22: This prAA represents common mods to prEN IEC 61386-22 (PR=71035)
20210507: on hold in order to incorporate SNCs
20210618: SNCs approved, document ready for publication
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies general requirements and tests for powertrack (PT) systems with a rated voltage not exceeding 277 V a.c. single phase, or 480 V a.c. two or three phase 50 Hz/60 Hz with a rated current not exceeding 63 A. These systems are used for distributing electricity in household, commercial and industrial premises.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
Clause 1 of IEC 61386-1:2008 is applicable, except as follows: Addition: This part of IEC 61386 specifies the requirements for flexible conduit systems.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- 1 (current)
- 2
- 3
- 4
- 5