TA 19 - Environmental and energy aspects for multimedia systems and equipment

IEC 63296-2:2023 is applicable to active acoustic noise-cancelling headphones and earphones that have the function of reducing the ambient noise heard by the user by the level of the output sound from the transducer, which is generated by the ambient noise detection microphone and the noise reduction signal processing circuit.
This document covers headphones and earphones to be worn over-the-ear or in-ear, all of which are referred to as "headphones" in this document.
This document specifies the terms and definitions relating to battery duration of this type of headphones and the measurement and evaluation methods.
The noise-detection microphones are mounted in the body, on the surface, or on an accessory of the headphones. Signal-processing circuits are analogue and digital electronic circuits.
This document does not deal with equipment intended for hearing protection. It is also not applicable to music players, recorders, etc. that have a noise-cancelling function.
The battery duration measurement methods can be applied to headphones having no active noise-cancelling function.

IEC 63474:2023 specifies methods of measurement of electrical power consumption in networked standby and the reporting of the results for edge equipment.
Power consumption in standby (other than networked standby) is covered by EN 50564, including the input voltage range.
This document also provides a method to test power management and to test whether it is possible to deactivate wireless network connection(s).
This document does not apply to the measurement of electrical power consumption in networked standby for interconnecting equipment.

IEC TR 63449:2023 presents a study of the impact of high dynamic range (HDR) technologies with "dynamic metadata" on TV luminance and power consumption. It compares the power consumption of content with dynamic metadata to the same content without dynamic metadata. Non-dynamic "static metadata" HDR technologies such as HDR10 and non-metadata HDR such as HLG, were previously studied in IEC TR 63274:2021.
This document also reviews the current HDR TV market and analyses existing HDR TV power measurement methods and considerations for any changes to those power measurement standards.
While this document studies the results of content that include Dolby Vision® and HDR10+ dynamic metadata, any comparison of these two technologies is outside of the scope of this document.

IEC 62087-3:2023 specifies the determination of the power consumption and related characteristics of television sets. Television sets include, but are not limited to, those with LCD, OLED, or projection technologies. The operating modes and functions, as they specifically apply to television sets, are defined in detail in this part of IEC 62087. This document is limited to television sets that can be connected to an external power source. Television sets that include a non-removable, main battery are not covered by this document. Television sets can include any number of auxiliary batteries. The measuring conditions in this document represent the normal use of the equipment and can differ from specific conditions, for example as specified in safety standards. IEC 62087-3:2023 cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) it introduces measuring procedures for the determination of power consumption in the On mode while viewing static metadata HDR video content;
b) all tests for On mode power determination are performed with MDD disabled;
c) only progressive video signals are used for testing;
d) a dimmable LED reflector lamp is used as a light source for illuminating the ABC sensor to achieve specific illuminance levels;
e) a dynamic box and outline video signal is used for determining the ratio of peak luminance.

IEC 62087-2:2023 specifies the signals used to determine the power consumption of audio, video, and related equipment, such as television sets and computer monitors. It also specifies signals for determining the peak luminance ratio that is sometimes associated with television set power consumption measurement programs. In addition, this part specifies equipment, interfaces, and accuracy related to signal generation. IEC 62087-2:2023 cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) HDR and UHD video test signals have been added;
b) dynamic box and outline test signals have been added, replacing the static box and outline test signals;
c) all test signals are provided as media files for download from a specified IEC online repository, which replaces previous DVD and Blu-ray media.

IEC 62623:2022 covers personal computing products. It applies to desktop and notebook computers as defined in 4.1 that are marketed as final products and that are hereafter referred to as the equipment under test (EUT) or product. This document specifies:
- a test procedure to enable the measurement of the power and/or energy consumption in each of the EUT's power modes;
- formulas for calculating the typical energy consumption (TEC) for a given period (normally annual);
- a majority profile to be used with this document which enables conversion of average power into energy within the TEC formulas;
- a pre-defined format for the presentation of results.
This document does not set any pass/fail criteria for the EUTs. Users of the test results define such criteria. IEC 62623:2022 cancels and replaces the first edition published in 2012. This edition constitutes a technical revision. The first edition of this standard was originally based on ECMA-383. This edition includes the following significant technical changes with respect to the previous edition:
a) Additions to terms & definitions and modification to short & long idle descriptions.
b) Test setup modifications for notebooks where battery pack cannot be removed for testing.
c) Categorisation procedure based on ECMA-389 removed.
d) Replace majority profile with new duty cycle study including new duty cycle attributes for desktop and notebook in a residential and enterprise application.
e) Removal of any reference and test methodology to ENERGY STAR V5.

IEC 63296-1:2021 specifies the methods for measuring the battery duration at defined sound pressure levels for continuous music playback of battery-powered loudspeaker equipment. A primary battery or secondary battery can be used as a power source for the loudspeaker and its composite equipment. In the case of composite equipment, this method for the measurement of battery duration can be applied under the condition of powered loudspeaker playback only.

IEC TR 63274:2021 introduces high dynamic range video technology, describes current television set power consumption measurement methods, discusses the HDR TV market, analyses HDR TV power measurement challenges, and considers a path forward for HDR TV power measurement standards development.

ISO 20294:2018 This document specifies the requirements for quantifying the carbon footprint of those processes, materials and technologies within the user's knowledge and control that are necessary for the delivery and use of e-media. It covers requirements to account for e-media archiving, distribution, use and storage. It is based on a life cycle assessment (LCA) approach, using defined system boundaries and a specified functional unit as the basis for complete or partial carbon footprinting studies. These data can be referenced throughout supply chains for individual e-media products.
This document is applicable to a carbon footprint of a product (CFP) study of e-media regarding contents and e-media devices.
This document provides a framework for carbon calculators that organisations can follow and that can be used as the structure for market- or sector-specific carbon footprinting tools. Studies and tools constructed within this framework methodology provide carbon footprint quantifications of e-media that can be validated, verified and provide reference for future studies.
This document does not assess any social or economic aspects or impacts, or any other environmental aspects and related impacts potentially arising from the life cycle of a product.

IEC TR 62921:2016(E) provides specific guidance for the use of streamlining techniques that minimize cost and resources needed to complete greenhouse gas emissions quantifications. In addition, the product category rules (PCR) section of this Technical Report recommends "state-of-the-art" process and data assumptions in order to reduce uncertainty. Lastly, this Technical Report provides an example of how a calculation could be performed.

IEC TR 62935:2016(E) introduces the concept of High Dynamic Range (HDR) video, lists some of the related standards and activities, provides information about HDR in the marketplace, and proposes areas of HDR measurement that could be standardized.

IEC 62087-3:2015 specifies the determination of the power consumption and related characteristics of television sets. Television sets include, but are not limited to, those with CRT, LCD, PDP, OLED, or projection technologies. The operating modes and functions, as they specifically apply to television sets, are defined in detail in this part of IEC 62087. This first edition of IEC 62087-3 cancels and replaces Clauses 6 and 11 and Annex B of IEC 62087:2011. This standard together with IEC 62087-1 to IEC 62087-2 and IEC 62087-4 to IEC 62087-6 cancels and replaces IEC 62087:2011 in its entirety. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to Clauses 6 and 11 and Annex B of IEC 62087:2011. For TVs with an automatic brightness control feature, power may now be measured at multiple specific illumination levels. A method has been defined for determining the ratio of peak luminance expected in the home versus the peak luminance expected in the retail environment. Sections related to general measuring conditions and procedures are now in IEC 62087-1:2015. Sections related to signals and media are now in IEC 62087-2:2015. The titles have changed in order to comply with the current directives and to accommodate the multipart structure.

IEC 62087-5:2015 specifies methods of measurement for the power consumption of set top boxes (STBs). It specifies the different modes of operation which are relevant for measuring power consumption. This first edition of IEC 62087-5 cancels and replaces Clause 8 of IEC 62087:2011. This standard together with IEC 62087-1 to IEC 62087-4 and IEC 62087-6 cancels and replaces IEC 62087:2011. This International Standard constitutes a technical revision.

IEC 62087-1:2015 specifies the general requirements for the determination of power consumption of audio, video, and related equipment. Requirements for specific types of equipment are specified in additional parts of this series of standards and may supersede the requirements specified in this standard. Moreover, this part of IEC 62087 defines the different modes of operation which are relevant for determining power consumption. This first edition of IEC 62087-1 together with IEC 62087-2 to IEC 62087-6 cancels and replaces IEC 62087:2011 in its entirety. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to Clauses 1 to 5 of IEC 62087:2011.
- It includes new information about operation modes.
- Equipment that includes removable main batteries are now considered.
- Light measuring equipment is now specified.

IEC 62087-2:2015 specifies signals and media used in determination of the power consumption of audio, video, and related equipment, such as television sets and computer monitors. It also specifies signals for determining the peak luminance ratio that is sometimes associated with television power consumption measurement programs. In addition, this part specifies equipment, interfaces, and accuracy related to signal generation. This first edition of IEC 62087-2 together with IEC 62087-1 and IEC 62087-3 to IEC 62087-6 cancels and replaces IEC 62087:2011 in its entirety. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to Clause 11 of IEC 62087:2011. The signals included on the discs are now numbered generically, rather than being based on the subclause numbers within the text of the television test method. Video test patterns used to determine the peak luminance ratio are now included on the discs. Audio test signals are specified. The box and outline video signal has been added.
This publication is available in CD-ROM format only. The 5-disc package contains the publication on a CD and video files on two DVDs and two Blu-ray™ Discs.

IEC 62087-6:2015 specifies the determination of the power consumption of audio equipment for consumer use. The various modes of operation which are relevant for measuring power consumption are defined. This first edition of IEC 62087-6 cancels and replaces Clause 9 of IEC 62087:2011. This standard together with IEC 62087-1 to IEC 62087-5 cancels and replaces IEC 62087:2011. This International Standard constitutes a technical revision. This edition includes the following significant technical changes with respect to Clause 9 of IEC 62087:2011. The definition of the input signal is changed. The output power measurement of amplifiers is changed. The measurement method for compact audio systems including loudspeakers is added. Methods for measuring On-decoding, idle and auto power down functions are added. Portions of the document related to general measuring conditions and procedures are now contained in IEC 62087-1:2015. Portions of the document related to signals and media are now in IEC 62087-2:2015. The titles have changed in order to comply with the current directives and to accommodate the new multipart structure of IEC 62087.

IEC 62087-4:2015 specifies methods of measurement for the power consumption of video recording equipment with removable media. It specifies the different modes of operation which are relevant for measuring power consumption. This first edition of IEC 62087-4 cancels and replaces Clause 7 of IEC 62087:2011. This standard together with IEC 62087-1 to IEC 62087-3 and IEC 62087-5 to IEC 62087-6 cancels and replaces IEC 62087:2011. This International Standard constitutes a technical revision. This edition includes significant technical changes with respect to Clause 7 of IEC 62087:2011. The changes include fundamental and extensive revisions to cover video recorders such as DVD and BD types as well as recorders with removable solid state memory. Clause 7 has been revised in its entirety.

IEC 62623:2012 covers personal computing products. It applies to desktop and notebook computers as defined in 4.1 that are marketed as final products and that are hereafter referred to as the equipment under test (EUT) or product. This standard specifies:
- a test procedure to enable the measurement of the power and/or energy consumption in each of the EUT's power modes;
- formulas for calculating the typical energy consumption (TEC) for a given period (normally annual);
- a majority profile that should be used with this standard which enables conversion of average power into energy within the TEC formulas;
- a system of categorisation enabling like for like comparisons of energy consumption between EUTs and a pre-defined format for the presentation of results.
This standard does not set any pass/fail criteria for the EUTs. Users of the test results should define such criteria. Keywords: Power consumption, Desktop computer, Notebook computer

IEC 62075:2012 applies to all audio/video, information and communication technology equipment marketed as final products, hereafter referred to as products. Although this standard does not explicitly apply to individual components and subassemblies to be incorporated into final products, component manufacturers also should consider this standard, to enable manufacturers using such components to meet the requirements herein. Only the intended use of products as defined by the manufacturer is within the scope of this standard. This standard specifies requirements and recommendations for the design of environmentally sound products regarding:
- life cycle thinking aspects,
- material efficiency,
- energy efficiency,
- consumables and batteries,
- chemical and noise emissions,
- end of life,
- hazardous substances/preparations,
- and product packaging. This standard covers only criteria directly related to the environmental performance of the product. Criteria such as safety, ergonomics and electromagnetic compatibility (EMC) are outside the scope of this standard and covered by other standards. This second edition cancels and replaces the first edition published in 2008. It is primarily an editorial revision that adds information related to the modifications noted in certain definitions and updating of regulation references. Keywords: Audio/Video, Environmental Aspects, Life Cycle

IEC/TS 62654:2012(E) defines the architecture and functional requirements of an energy saving system (ESS) that measures energy consumption of each home appliance, including AV multimedia equipment and systems, and shows how to reduce its standby power. With respect to energy consumption measurements, this specification extends only to AC power environments in premises.

defines the operation-mode mix of portable and hand-held multimedia equipment which can be driven by battery, especially mobile personal computers, in order to clarify the issues to be standardized on the battery run time.

This International Standard defines the test methods used to measure power consumption of information technology equipment (ITE) under various modes of operation for the purpose of energy management. ITE includes the products identified in the scope of IEC 60950-1.