EN 60384-3:2016

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RþQDFestkondensatoren zur Verwendung in Geräten der Elektronik - Teil 3: Rahmenspezifikation: Oberflächenmontierbare Tantal-Kondensatoren mit festem Mangandioxid-ElektrolytCondensateurs fixes utilisés dans les équipements électroniques - Partie 3: Spécification intermédiaire: Condensateurs fixes électrolytiques au tantale pour montage en surface, à électrolyte solide au dioxyde de manganèseFixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte (IEC 60384-3:2016)31.060.40Tantalski elektrolitni kondenzatorjiTantalum electrolytic capacitorsICS:Ta slovenski standard je istoveten z:EN 60384-3:2016SIST EN 60384-3:2016en01-december-2016SIST EN 60384-3:2016SLOVENSKI
STANDARDSIST EN 60384-3:20081DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 60384-3
October 2016 ICS 31.060.30
Supersedes
EN 60384-3:2006
English Version
Fixed capacitors for use in electronic equipment -
Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte (IEC 60384-3:2016)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 3: Spécification intermédiaire - Condensateurs fixes électrolytiques au tantale pour montage en surface, à électrolyte solide (MnO2) (IEC 60384-3:2016)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 3: Rahmenspezifikation - Oberflächenmontierbare Tantal-Kondensatoren mit festem (MnO2)-Elektrolyt (IEC 60384-3:2016) This European Standard was approved by CENELEC on 2016-08-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60384-3:2016 E SIST EN 60384-3:2016

This document supersedes EN 60384-3:2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60384-3:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 60068-2-58:2015 NOTE Harmonized as EN 60068-2-58:2015 (not modified). SIST EN 60384-3:2016

Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60062 -
Marking codes for resistors and capacitors EN 60062 -
IEC 60063 -
Preferred number series for resistors and capacitors EN 60063 -
IEC 60068-1 2013
Environmental testing - Part 1: General and guidance EN 60068-1 2014
IEC 60384-1 2016
Fixed capacitors for use in electronic equipment -
Part 1: Generic specification EN 60384-1 2016
IEC 60417 -
Graphical symbols for use on equipment - -
IEC 61193-2 2007
Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages EN 61193-2 2007
ISO 3 -
Preferred numbers - Series of preferred numbers - -
IEC 60384-3 Edition 4.0 2016-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment –
Part 3: Sectional specification – Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 3: Spécification intermédiaire – Condensateurs fixes électrolytiques
au tantale pour montage en surface, à électrolyte solide (MnO2)
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 31.060.30
ISBN 978-2-8322-3508-9
– 2 – IEC 60384-3:2016 © IEC 2016 CONTENTS FOREWORD . 5 1 General . 7 1.1 Scope . 7 1.2 Object . 7 1.3 Normative references . 7 1.4 Information to be given in a detail specification . 8 1.4.1 General . 8 1.4.2 Outline drawing and dimensions . 8 1.4.3 Mounting . 8 1.4.4 Ratings and characteristics . 8 1.4.5 Marking . 9 1.5 Terms and definitions . 9 1.6 Marking . 9 1.6.1 General . 9 1.6.2 Information for marking . 9 1.6.3 Marking on capacitors . 9 1.6.4 Marking on packaging . 10 2 Preferred ratings and characteristics . 10 2.1 Preferred characteristics . 10 2.2 Preferred values of ratings . 10 2.2.1 Nominal capacitance (CN) . 10 2.2.2 Tolerance on nominal capacitance . 11 2.2.3 Rated voltage (UR) . 11 2.2.4 Category voltage (UC) . 11 2.2.5 Surge voltage (URS or UCS) . 11 2.2.6 Rated temperature . 11 3 Quality assessment procedures . 12 3.1 Primary stage of manufacture . 12 3.2 Structurally similar components . 12 3.3 Certified test records of released lots . 12 3.4 Qualification approval procedures . 12 3.4.1 General . 12 3.4.2 Qualification approval on the basis of the fixed sample size procedure . 12 3.4.3 Tests . 13 3.5 Quality conformance inspection . 20 3.5.1 Formation of inspection lots . 20 3.5.2 Test schedule . 20 3.5.3 Delayed delivery . 20 3.5.4 Assessment levels . 20 4 Test and measurement procedures . 21 4.1 Drying . 22 4.2 Measuring conditions . 22 4.3 Mounting . 22 4.3.1 General . 22 4.3.2 Initial inspection . 22 4.3.3 Final inspections . 22 SIST EN 60384-3:2016

IEC 60384-3:2016 © IEC 2016 – 3 – 4.4 Visual examination and check of dimensions . 22 4.4.1 General . 22 4.4.2 Visual examination and check of dimensions . 22 4.4.3 Requirements . 22 4.5 Electrical tests . 22 4.5.1 Leakage current . 22 4.5.2 Capacitance . 23 4.5.3 Tangent of loss angle (tan δ) . 23 4.5.4 Impedance (if required) . 23 4.5.5 Equivalent series resistance (ESR) (if required) . 24 4.6 Resistance to soldering heat . 24 4.6.1 General . 24 4.6.2 Test conditions . 24 4.6.3 Recovery . 24 4.6.4 Final inspections and requirements . 25 4.7 Solderability . 25 4.7.1 General . 25 4.7.2 Test conditions . 25 4.7.3 Final inspections and requirements . 25 4.8 Shear test . 25 4.8.1 General . 25 4.8.2 Final inspections and requirements . 25 4.9 Substrate bending test . 25 4.9.1 General .
...