59.040 - Textile auxiliary materials
ICS 59.040 Details
Textile auxiliary materials
Textilhilfsstoffe
Materiaux auxiliaires du textile
Pomožni materiali za tekstilije
General Information
Frequently Asked Questions
ICS 59.040 is a classification code in the International Classification for Standards (ICS) system. It covers "Textile auxiliary materials". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 91 standards classified under ICS 59.040 (Textile auxiliary materials). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 59.040 - Textile auxiliary materials
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document defines the principal terms used in the field of feather and down.
- Standard21 pagesEnglish languagee-Library read for1 day
This document establishes provisions for the labelling of the composition of the components of the plumage for use as fillings and of the fowl species from which such components are derived (waterfowl or landfowl).
It is applicable to finished feather and down materials used as fillings of manufactured articles at each stage in their commercial distribution.
This document is not applicable for fillings totally containing more than 2 % of foreign matter (see 3.4).
- Standard12 pagesEnglish languagee-Library read for1 day
This document defines the principal terms used in the field of feather and down.
- Standard21 pagesEnglish languagee-Library read for1 day
This document establishes provisions for the labelling of the composition of the components of the plumage for use as fillings and of the fowl species from which such components are derived (waterfowl or landfowl).
It is applicable to finished feather and down materials used as fillings of manufactured articles at each stage in their commercial distribution.
This document is not applicable for fillings totally containing more than 2 % of foreign matter (see 3.4).
- Standard12 pagesEnglish languagee-Library read for1 day
SIGNIFICANCE AND USE
3.1 This test method is intended for the determination of insoluble impurities contained in fats and oils used in the fatliquors and stuffing compounds.
SCOPE
1.1 This test method covers the determination of the amount of impurities that are insoluble in kerosine and petroleum ether contained in fats and oils.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Standard2 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
5.1 This test method may be used for acceptance testing of commercial shipments of bulk plumage. Acceptance tolerances of content must be established between the purchaser and seller of bulk shipments of plumage, which also must comply with state and federal agency regulations, as appropriate.
5.1.1 In case of a dispute arising from differences in reported test results when using Test Method D4524 for acceptance testing of commercial shipments, the purchaser and the supplier should conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimens that are as homogeneous as possible and that are from a lot of material of the type in question. The test specimens should then be randomly assigned in equal numbers to each laboratory for testing. The average results from the two laboratories should be compared using Student's t-test for unpaired data and an acceptable probability level chosen by the two parties before the testing is begun. If a bias is found, either its cause must be found and corrected or the purchaser and the supplier must agree to interpret test results in the light of the known bias.
5.2 This test method may also be applicable to the acceptance of consumer products that use plumage as a filling material. Such consumer products include pillows, comforters, sleeping bags, garments, furniture, and mattresses. Acceptance tolerances of content are established by distributors, importers, state or federal regulatory agencies. See 5.1.1.
SCOPE
1.1 This test method covers the quantitative determination of the components found in plumage. The test method is applicable for plumage found in bulk form or in finished consumer products.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
3.1 This test method is intended for use in the determination of the moisture and other volatile matter contained in fats, oils, and fatliquors used in the softening and stuffing of leather, as well as those used in the manufacture of products for such purpose.
SCOPE
1.1 This test method covers the determination of moisture and other volatile material under conditions of the test. It is applicable to all fats, oils, and fatliquors used in the softening and stuffing of leather.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesEnglish languagesale 15% off
This European Standard specifies a method for the determination of the composition of feather and/or down fit for or constituting filled manufactured articles in order to label and/or mark it or to verify the denominations reported on the label.
- Standard11 pagesEnglish languagee-Library read for1 day
This European Standard specifies one procedure for determining the fill power (massic volume). This method is applicable to processed plumage fit for or constituting filled manufactured articles (e.g. anoraks, quilts, etc.).
- Standard12 pagesEnglish languagee-Library read for1 day
This European Standard specifies a method for determining the total mass of a product solely filled with feather and/or down and the mass of the filling material.
- Standard6 pagesEnglish languagee-Library read for1 day
This European standard specifies a method for obtaining a representative laboratory bulk sample of a lot of feather and down and of feather and down in a manufactured product or of a manufactured product.
- Standard8 pagesEnglish languagee-Library read for1 day
This European Standard specifies a method for determining the total mass of a product solely filled with feather and/or down and the mass of the filling material.
- Standard6 pagesEnglish languagee-Library read for1 day
This European Standard specifies one procedure for determining the fill power (massic volume). This method is applicable to processed plumage fit for or constituting filled manufactured articles (e.g. anoraks, quilts, etc.).
- Standard12 pagesEnglish languagee-Library read for1 day
This European Standard specifies a method for the determination of the composition of feather and/or down fit for or constituting filled manufactured articles in order to label and/or mark it or to verify the denominations reported on the label.
- Standard11 pagesEnglish languagee-Library read for1 day
This European standard specifies a method for obtaining a representative laboratory bulk sample of a lot of feather and down and of feather and down in a manufactured product or of a manufactured product.
- Standard8 pagesEnglish languagee-Library read for1 day
This European Standard describes a method for the determination of the fibre-proof properties of a fabric using a rubbing apparatus, when the fabric is tested against the filling material (either loose fibre or wadding) that will be used in the final product. This European Standard is applicable to all types of bedding articles, clothing and quilted products filled with textile materials.
- Standard13 pagesEnglish languagee-Library read for1 day
This standard applies to new bedding articles, e.g. quilts, of all kinds and sizes, which are solely filled with feathers and/or down.
This standard does not apply to:
¾ sleeping bags;
¾ clothing;
¾ furniture, cushions.
It lays down definitions (see also EN 1885), tolerances for sizes, materials, performance requirements, sampling, reference to test methods, marking and labelling.
- Standard14 pagesEnglish languagee-Library read for1 day
This standard applies to new bedding articles, e.g. quilts, of all kinds and sizes, which are solely filled with feathers and/or down.
This standard does not apply to:
¾ sleeping bags;
¾ clothing;
¾ furniture, cushions.
It lays down definitions (see also EN 1885), tolerances for sizes, materials, performance requirements, sampling, reference to test methods, marking and labelling.
- Standard14 pagesEnglish languagee-Library read for1 day
Modify the table on filling of the test cushion.
- Amendment4 pagesEnglish languagee-Library read for1 day
This European Standard specifies the characteristics for new semi-finished products, i.e. cushions and other upholstered elements solely filled with feathers and/or down, to their primary tick and their filling.
It does not apply to their cover nor to support they are meant for.
Characteristics to be agreed upon by the purchaser and the converter are given in annex A (informative).
- Standard8 pagesEnglish languagee-Library read for1 day
This standard specifies the characteristics for textile fabrics (outer shell, filling shell, lining) and filling of clothing (light use purposes) solely filled with feather and/or down.
- Standard8 pagesEnglish languagee-Library read for1 day
This part 1 specifies a test method by rotation to evaluate the durability of cushions solely filled with feathers and/or down.
This standard applies to:
¾ back cushions;
¾ seating cushions;
¾ armrest cushions.
- Standard7 pagesEnglish languagee-Library read for1 day
Modify the table on filling of the test cushion.
- Amendment4 pagesEnglish languagee-Library read for1 day
This part 2 defines a method for testing the behaviour to durability of a cushion solely filled with feather and/or down, considered in its primary tick.
- Standard8 pagesEnglish languagee-Library read for1 day
This part 1 specifies a test method by rotation to evaluate the durability of cushions solely filled with feathers and/or down.
This standard applies to:
¾ back cushions;
¾ seating cushions;
¾ armrest cushions.
- Standard7 pagesEnglish languagee-Library read for1 day
This part 2 defines a method for testing the behaviour to durability of a cushion solely filled with feather and/or down, considered in its primary tick.
- Standard8 pagesEnglish languagee-Library read for1 day
This European Standard specifies the characteristics for new semi-finished products, i.e. cushions and other upholstered elements solely filled with feathers and/or down, to their primary tick and their filling.
It does not apply to their cover nor to support they are meant for.
Characteristics to be agreed upon by the purchaser and the converter are given in annex A (informative).
- Standard8 pagesEnglish languagee-Library read for1 day
This European standard specifies a method to determine the compressibility index of clothing filled solely with feathers and/or downs.
- Standard9 pagesEnglish languagee-Library read for1 day
This European standard describes a method to determine the absorption of water of a filling of feathers and downs. The absorption of water is defined by the capacity and the time of absorption.
- Standard6 pagesEnglish languagee-Library read for1 day
This European standard provides the requirements necessary to satisfy the hygiene and cleanliness of feather and/or down filling materials. This European standard applies to finished feather and/or down materials used as a filling of a manufactured article.
- Standard7 pagesEnglish languagee-Library read for1 day
This European standard describes a method to determine the absorption of water of a filling of feathers and downs. The absorption of water is defined by the capacity and the time of absorption.
- Standard6 pagesEnglish languagee-Library read for1 day
This European standard specifies a method to determine the compressibility index of clothing filled solely with feathers and/or downs.
- Standard9 pagesEnglish languagee-Library read for1 day
This standard specifies the characteristics for textile fabrics (outer shell, filling shell, lining) and filling of clothing (light use purposes) solely filled with feather and/or down.
- Standard8 pagesEnglish languagee-Library read for1 day
This European standard provides the requirements necessary to satisfy the hygiene and cleanliness of feather and/or down filling materials. This European standard applies to finished feather and/or down materials used as a filling of a manufactured article.
- Standard7 pagesEnglish languagee-Library read for1 day
This European standard specifies a method for determining and calculating the comercial mass of a lot of feather and down, in order to control the invoice mass.
- Standard10 pagesEnglish languagee-Library read for1 day
This method describes the dip slide procedures, that uses two types of agar to test the presence of commensal bacteria and coliforms (gram negative). This procedure is suitable when a manufacturer requires a simple test to screen finished filling material hygiene. This method cannot be used to test the presence of sulphito-reducing clostrides (gram positive) and salmonella (gram negative).
- Standard14 pagesEnglish languagee-Library read for1 day
This standard describes a method for the determination of down and/or feather penetration through the primary tick fabric of a specimen containing feather and/or down filling using a rubbing apparatus.
- Standard7 pagesEnglish languagee-Library read for1 day
This European Standard specifies a method to check one of the cleanliness aspects of feather and down ready to be used through the determination of the amount of undissolved and solved matter present in the aqueous extract.
- Standard7 pagesEnglish languagee-Library read for1 day
This European Standard specifies a method for determining the oxygen index number of feathers and down by means of a titration method.
- Standard5 pagesEnglish languagee-Library read for1 day
This European Standard specifies a method for determining the water-soluble chloride content of feathers and down. The techniques involved are not adequate for determining significant differences where the water-soluble chlorides found by this method are below 50 mg/kg.
- Standard6 pagesEnglish languagee-Library read for1 day
This European Standard specifies a procedure to determine the moisture content of an individual sample of feather and down.
- Standard4 pagesEnglish languagee-Library read for1 day
This European Standard describes a method for the determination of all sizes of ready-made quilts filled with feather and/or down. The method does not apply to quilts with rounded edges of greater radius.
- Standard7 pagesEnglish languagee-Library read for1 day
This standard describes a method for the determination of down and feather penetration through the primary tick fabric of a specimen containing feather and/or down filling using an impact apparatus.
- Standard6 pagesEnglish languagee-Library read for1 day
This European Standard specifies a method for determining the amount of solvent soluble matter in dichloromethane.
- Standard5 pagesEnglish languagee-Library read for1 day
This European standard specifies a method for determining and calculating the comercial mass of a lot of feather and down, in order to control the invoice mass.
- Standard10 pagesEnglish languagee-Library read for1 day
This method describes the dip slide procedures, that uses two types of agar to test the presence of commensal bacteria and coliforms (gram negative). This procedure is suitable when a manufacturer requires a simple test to screen finished filling material hygiene. This method cannot be used to test the presence of sulphito-reducing clostrides (gram positive) and salmonella (gram negative).
- Standard14 pagesEnglish languagee-Library read for1 day
This European Standard specifies a method to check one of the cleanliness aspects of feather and down ready to be used through the determination of the amount of undissolved and solved matter present in the aqueous extract.
- Standard7 pagesEnglish languagee-Library read for1 day
This standard describes a method for the determination of down and feather penetration through the primary tick fabric of a specimen containing feather and/or down filling using an impact apparatus.
- Standard6 pagesEnglish languagee-Library read for1 day
This standard describes a method for the determination of down and/or feather penetration through the primary tick fabric of a specimen containing feather and/or down filling using a rubbing apparatus.
- Standard7 pagesEnglish languagee-Library read for1 day
This European Standard specifies a method for determining the amount of solvent soluble matter in dichloromethane.
- Standard5 pagesEnglish languagee-Library read for1 day