This document is to be used together with the other generic parts of EN 13001 series of standards, see Annex E, as well as pertinent crane type product EN standards, and as such they specify general conditions, requirements and methods to, by design and theoretical verification, prevent mechanical hazards of hydraulic cylinders that are part of the load carrying structures of cranes. Hydraulic piping, hoses and connectors used with the cylinders are not within the scope of this document, as well as cylinders made from other material than carbon steel.
NOTE 1   Specific requirements for particular crane types are given in the appropriate European product standards, see Annex E.
The significant hazardous situations and hazardous events that could result in risks to persons during intended use are identified in Annex F. Clauses 4 to 7 of this document provide requirements and methods to reduce or eliminate these risks:
a)   exceeding the limits of strength (yield, ultimate, fatigue);
b)   elastic instability (column buckling).
NOTE 2   EN 13001-3-6 deals only with the limit state method in accordance with EN 13001-1.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with EN 13001-1 and EN 13001-2 and, as such, they specify general conditions, requirements and methods to prevent by design and theoretical verification, mechanical hazards in crane hooks.
This European Standard covers the following parts of hooks and types of hooks:
-   bodies of any type of hooks made of steel forgings;
-   machined shanks of hooks with a thread/nut suspension.
Principles of this European Standard can be applied to machined shanks of hooks in general. However, stress concentration factors relevant to designs not given in this standard would have to be determined and applied.
NOTE 1   Cast hooks and plate hooks, which are those, assembled of one or several parallel parts of rolled steel plates, are not covered in this European Standard.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 4 to 8 of this document are necessary to reduce or eliminate the risks associated with the following hazards:
a)   exceeding the limits of strength (yield, ultimate, fatigue);
b)   exceeding temperature limits of material.
The requirements of this European Standard are stated in the main body of the document and are applicable to forged hook designs in general.
The commonly used hook body and shank designs listed in Annexes A, B and F are only examples and should not be referred to as requirements of this European Standard. Annex I gives guidance for the selection of a hook size, where a hook body is in accordance with Annex A or B. The selection of hook form is not limited to those shown in Annexes A and B.
This European Standard is applicable to cranes, which are manufactured after the date of approval of this European Standard by CEN, and serves as a reference base for product standards of particular crane types.
NOTE 2   This part of EN 13001 deals only with the limit state method in accordance with EN 13001-1.
FprA1:
Add after 1st paragraph the following sentence:
"
It has to be used together with the other generic parts of EN 13001 series of standards, see Annex L.
".
Replace in 2nd paragraph the 1st list item with:
"
-   bodies of any type of hooks made of steel forgings or steel castings, including stainless steel;".
Replace NOTE 1 with:
"
NOTE 1   Plate hooks, which are those, assembled of one or several parallel parts of rolled steel plates, are not covered in this document.".
In the 4th paragraph, replace the 1st list item with:
"
a)   exceeding the limits of yield strength, ultimate strength, fatigue strength, brittle fracture;".
Replace the 5th paragraph with:
"The requirements of this document are stated in the main body of the document and are applicable to hook designs in general.".
After 4th paragraph, add the sentence:
"
The hazards covered by this document are identified by Annex M.
".

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies load actions and load combinations for the calculation of load effects as basis for the proof of competence of a crane and its main components. It will be used together with the other generic parts of the EN 13001 series of standards, see Annex E. As such they specify conditions and requirements on design to prevent mechanical hazards of cranes and provide a method of verification of those requirements.
NOTE   Specific requirements for particular types of crane are given in the appropriate European product standards for the particular crane type, see Annex E.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and reasonably foreseeable misuse. Clause 4 of this document provides means to reduce or eliminate the risks of mechanical failures due to the following:
a)   rigid body instability of the crane or its parts (tilting);
b)   exceeding the limits of strength (yield, ultimate, fatigue);
c)   elastic instability of the crane or its parts or components (buckling, bulging).
The hazards covered by this document are identified by Annex G.
This document is not applicable to cranes that are manufactured before the date of its publication as EN.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is to be used together with EN 13001-1 and EN 13001-2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of cranes by design and theoretical verification.
NOTE 1 Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type.
This document covers bearings in cranes. It is not intended for bearings being part of standard components, e.g. gearboxes, motors - however those bearings shall be designed using load actions from EN 13001-2 and classification parameters of EN 13001-1.
NOTE 2 EN 13001-3-7 is under preparation for gears and gearboxes and deals with load actions for bearings in gear boxes.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during intended use and reasonably foreseeable misuse. Clauses 4 to 7 of this document are necessary to reduce or eliminate risks associated with the following hazards:
- exceeding the limits of strength (yield, ultimate, fatigue);
- exceeding temperature limits of material or components;
- elastic instability of the crane or its parts (buckling, bulging).
This document is not applicable to cranes which are manufactured before the date of its publication as an EN and serves as reference base for the European Standards for particular crane types (see Annex D).
NOTE EN 13001-3-4 deals only with limit state method in accordance with EN 13001-1.

  • Standard
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day

20180116 CP: No XML available at publication stage

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general principles and requirements to be used together with EN 13001 2 and the EN 13001 3 series of standards, and as such they specify conditions and requirements on design to prevent mechanical hazards of cranes, and a method of verification of those requirements.
NOTE   Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clause 4 of this European Standard is necessary to reduce or eliminate the risks associated with the following hazards:
a)   instability of the crane or its parts (tilting);
b)   exceeding the limits of strength (yield, ultimate, fatigue);
c)   elastic instability of the crane or its parts (buckling, bulging);
d)   exceeding temperature limits of material or components;
e)   exceeding the deformation limits.
This European Standard is applicable to cranes which are manufactured after the date of approval by CEN of this standard and serves as reference base for the European Standards for particular crane types.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with EN 13001 1 and EN 13001 2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of wheel/rail contacts of cranes by design and theoretical verification. This European Standard covers requirements for steel and cast iron wheels and is applicable for metallic wheel/rail contacts only.
Roller bearings are not in the scope of this European Standard.
Exceeding the limits of strength is a significant hazardous situation and hazardous event that could result in risks to persons during normal use and foreseeable misuse. Clause 5 to Clause 6 of this European Standard are necessary to reduce or eliminate the risks associated with this hazard.
This European Standard is applicable to cranes, which are manufactured after the date of approval of this European Standard by CEN, and serves as a reference base for product standards of particular crane types.
This European Standard is for design purposes only and should not be seen as a guarantee of actual performance.
EN 13001-3-3 deals only with limit state method in accordance with EN 13001-1.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with EN 13001 1 and EN 13001 2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of wire ropes of cranes by design and theoretical verification.
NOTE   Specific requirements for particular types of cranes are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during intended use and reasonably foreseeable misuse. Clauses 5 to 6 of this standard are necessary to reduce or eliminate risks associated with the following hazard:
−   exceeding the limits of strength (yield, ultimate, fatigue).
This European Standard is not applicable to cranes which are manufactured before the date of its publication as EN and serves as reference base for the European Standards for particular crane types (see Annex C).
EN 13001 3 2 deals only with the limit state method in accordance with EN 13001 1.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document covers the following parts of hooks and types of hooks:
-   bodies of any type of hooks made of steel forgings or steel castings, including stainless steel;
-   machined shanks of hooks with a thread/nut suspension.
Plate hooks, which are those assembled of one or several parallel parts of rolled steel plates, are not covered.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 4 to 8 of this document are intended to reduce or eliminate the risks associated with the following hazards:
a)   exceeding the limits of yield strength, ultimate strength, fatigue strength, brittle fracture;
b)   exceeding temperature limits of material.
This document is not applicable to hooks installed in cranes manufactured before the date of its publication and serves as a reference base for product standards for particular crane types.
This part of EN 13001 deals only with the limit state method in accordance with EN 13001-1:2015.

  • Draft
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is due to be used together with EN 13001-1 and EN 13001-2 and as such they specify general conditions, requirements and methods to prevent by design and theoretical verification, mechanical hazards in gear components of cranes.
This document covers the following types of gears and adjoining components, used in mechanisms for any principal movement of a crane:
-   cylindrical helical and spur gears and bevel gears, with involute profile geometry;
-   gears arranged in enclosed housings or as open gears;
-   gears made from steel or iron and gear boxes made from steel, iron or aluminium;
-   gears and pinions with lubrication;
-   gear boxes and single gear arrangements with bearings and shafts supporting the gears.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 4 to 7 of this document are necessary to reduce or eliminate the risks associated with the following hazards:
-   exceeding the limits of strength (yield, ultimate, fatigue);
-   exceeding temperature limits of material.
This document is applicable to cranes, which are manufactured after the date of approval of this document by CEN, and serves as a reference base for product standards of particular crane types.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with EN 13001-1, EN 13001-2 and EN 13001-3-1 as well as pertinent crane type product EN standards, and as such they specify general conditions, requirements and methods to, by design and theoretical verification, prevent mechanical hazards of hydraulic cylinders that are part of the load carrying structures of cranes. Hydraulic piping, hoses and connectors used with the cylinders, as well as cylinders made from other material than carbon steel, are not within the scope of this standard.
The following are significant hazardous situations and hazardous events that could result in risks to persons during intended use and reasonably foreseeable misuse. Clauses 4 to 7 of this standard are necessary to reduce or eliminate risks associated with the following hazards:
a)   exceeding the limits of strength (yield, ultimate, fatigue);
b)   elastic instability (column buckling).
NOTE   EN 13001-3-6 deals only with the limit state method in accordance with EN 13001-1.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with EN 13001-1 and EN 13001-2 and, as such, they specify general conditions, requirements and methods to prevent by design and theoretical verification, mechanical hazards in crane hooks.
This European Standard covers the following parts of hooks and types of hooks:
-   bodies of any type of hooks made of steel forgings;
-   machined shanks of hooks with a thread/nut suspension.
Principles of this European Standard can be applied to machined shanks of hooks in general. However, stress concentration factors relevant to designs not given in this standard would have to be determined and applied.
NOTE 1   Cast hooks and plate hooks, which are those, assembled of one or several parallel parts of rolled steel plates, are not covered in this European Standard.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 4 to 8 of this document are necessary to reduce or eliminate the risks associated with the following hazards:
a)   exceeding the limits of strength (yield, ultimate, fatigue);
b)   exceeding temperature limits of material.
The requirements of this European Standard are stated in the main body of the document and are applicable to forged hook designs in general.
The commonly used hook body and shank designs listed in Annexes A, B and F are only examples and should not be referred to as requirements of this European Standard. Annex I gives guidance for the selection of a hook size, where a hook body is in accordance with Annex A or B. The selection of hook form is not limited to those shown in Annexes A and B.
This European Standard is applicable to cranes, which are manufactured after the date of approval of this European Standard by CEN, and serves as a reference base for product standards of particular crane types.
NOTE 2   This part of EN 13001 deals only with the limit state method in accordance with EN 13001-1.
FprA1:
Add after 1st paragraph the following sentence:
"
It has to be used together with the other generic parts of EN 13001 series of standards, see Annex L.
".
Replace in 2nd paragraph the 1st list item with:
"
-   bodies of any type of hooks made of steel forgings or steel castings, including stainless steel;".
Replace NOTE 1 with:
"
NOTE 1   Plate hooks, which are those, assembled of one or several parallel parts of rolled steel plates, are not covered in this document.".
In the 4th paragraph, replace the 1st list item with:
"
a)   exceeding the limits of yield strength, ultimate strength, fatigue strength, brittle fracture;".
Replace the 5th paragraph with:
"The requirements of this document are stated in the main body of the document and are applicable to hook designs in general.".
After 4th paragraph, add the sentence:
"
The hazards covered by this document are identified by Annex M.
".

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is to be used together with EN 13001-1 and EN 13001-2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of cranes by design and theoretical verification.
Specific requirements for particular types of cranes are given in the appropriate European standard for the particular crane type.
This document covers shafts (axles) in cranes that are not dealt with by other EN 13001 standards (e.g. pinned connections in EN 13001-3-1). It is not intended for axles being part of standard components, e.g. gearboxes, motors ... however those axles shall be designed using load actions from EN 13001-2 and classification parameters of EN 13001-1.
NOTE   EN 13001-3-7 is under preparation for gears and gearboxes and deals with load actions for axles in gear boxes.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during intended use and reasonably foreseeable misuse. Clauses 4 to 7 of this document are necessary to reduce or eliminate risks associated with the following hazards:
-   exceeding the limits of strength (yield, ultimate, fatigue);
-   exceeding temperature limits of material or components.
This document is not applicable to cranes which are manufactured before the date of its publication as EN and serves as reference base for the European standards for particular crane types (see Annex C).
NOTE   prEN 13001-3-8 deals only with limit state method in accordance with EN 13001-1.

  • Draft
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with EN 13001 1 and EN 13001 2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of wire ropes of cranes by design and theoretical verification.
NOTE   Specific requirements for particular types of cranes are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during intended use and reasonably foreseeable misuse. Clauses 5 to 6 of this standard are necessary to reduce or eliminate risks associated with the following hazard:
−   exceeding the limits of strength (yield, ultimate, fatigue).
This European Standard is not applicable to cranes which are manufactured before the date of its publication as EN and serves as reference base for the European Standards for particular crane types (see Annex C).
EN 13001 3 2 deals only with the limit state method in accordance with EN 13001 1.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The Clause 4.2.1 shall be changed in that way that Table 2 is permanent valid and requirements for other materials shall be added and/or modified. A proposal from Sweden/Austria will be available until June 2012.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies limit states, requirements and methods to prevent mechanical hazards in steel structures of cranes by design and theoretical proof of competence.
The significant hazardous situations and hazardous events that could result in risks to persons during intended use are identified in Annex L. Clauses 4 to 8 of this document provide requirements and methods to reduce or eliminate these risks:
a)   exceeding the limits of strength (yield, ultimate, fatigue);
b)   exceeding temperature limits of material or components;
c)   elastic instability of the crane or its parts (buckling, bulging).
This document is not applicable to cranes which are designed before the date of its publication as EN and serves as reference base for the European Standards for particular crane types (see Annex K).
NOTE   This document deals only with the limit state method in accordance with EN 13001-1:2015.

  • Draft
    129 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with EN 13001-1 and EN 13001-2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of cranes by design and theoretical verification.
NOTE   Specific requirements for particular types of cranes are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during intended use and reasonably foreseeable misuse. Clauses 4 to 8 of this standard are necessary to reduce or eliminate risks associated with the following hazards:
a)   exceeding the limits of strength (yield, ultimate, fatigue);
b)   exceeding temperature limits of material or components;
c)   elastic instability of the crane or its parts (buckling, bulging).
This European Standard is not applicable to cranes which are manufactured before the date of its publication as EN and serves as reference base for the European Standards for particular crane types (see Annex I).
NOTE   EN 13001-3-1 deals only with the limit state method in accordance with EN 13001-1.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with EN 13001-1, EN 13001-2 and EN 13001-3-1 as well as pertinent crane type product EN standards, and as such they specify general conditions, requirements and methods to, by design and theoretical verification, prevent mechanical hazards of hydraulic cylinders that are part of the load carrying structures of cranes. Hydraulic piping, hoses and connectors used with the cylinders, as well as cylinders made from other material than carbon steel, are not within the scope of this standard.
The following are significant hazardous situations and hazardous events that could result in risks to persons during intended use and reasonably foreseeable misuse. Clauses 4 to 7 of this standard are necessary to reduce or eliminate risks associated with the following hazards:
a)   exceeding the limits of strength (yield, ultimate, fatigue);
b)   elastic instability (column buckling).
NOTE   EN 13001-3-6 deals only with the limit state method in accordance with EN 13001-1.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with EN 13001-1 and EN 13001-2 and, as such, they specify general conditions, requirements and methods to prevent by design and theoretical verification, mechanical hazards in crane hooks.
This European Standard covers the following parts of hooks and types of hooks:
-   bodies of any type of hooks made of steel forgings;
-   machined shanks of hooks with a thread/nut suspension.
Principles of this European Standard can be applied to machined shanks of hooks in general. However, stress concentration factors relevant to designs not given in this standard would have to be determined and applied.
NOTE 1   Cast hooks and plate hooks, which are those, assembled of one or several parallel parts of rolled steel plates, are not covered in this European Standard.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 4 to 8 of this document are necessary to reduce or eliminate the risks associated with the following hazards:
a)   exceeding the limits of strength (yield, ultimate, fatigue);
b)   exceeding temperature limits of material.
The requirements of this European Standard are stated in the main body of the document and are applicable to forged hook designs in general.
The commonly used hook body and shank designs listed in Annexes A, B and F are only examples and should not be referred to as requirements of this European Standard. Annex I gives guidance for the selection of a hook size, where a hook body is in accordance with Annex A or B. The selection of hook form is not limited to those shown in Annexes A and B.
This European Standard is applicable to cranes, which are manufactured after the date of approval of this European Standard by CEN, and serves as a reference base for product standards of particular crane types.
NOTE 2   This part of EN 13001 deals only with the limit state method in accordance with EN 13001-1.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies load actions to be used together with the standard EN 13001 1 and EN 13001 3, and as such they specify conditions and requirements on design to prevent mechanical hazards of cranes, and a method of verification of those requirements.
NOTE   Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clause 4 of this standard is necessary to reduce or eliminate the risks associated with the following hazards:
a) Instability of the crane or its parts (tilting).
b) Exceeding the limits of strength (yield, ultimate, fatigue).
c) Elastic instability of the crane or its parts (buckling, bulging).
d) Exceeding temperature limits of material or components.
e) Exceeding the deformation limits.
This document is not applicable to cranes that are manufactured before the date of its publication as EN.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with EN 13001-1 and EN 13001-2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of cranes by design and theoretical verification.
NOTE   Specific requirements for particular types of cranes are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during intended use and reasonably foreseeable misuse. Clauses 4 to 8 of this standard are necessary to reduce or eliminate risks associated with the following hazards:
a)   exceeding the limits of strength (yield, ultimate, fatigue);
b)   exceeding temperature limits of material or components;
c)   elastic instability of the crane or its parts (buckling, bulging).
This European Standard is not applicable to cranes which are manufactured before the date of its publication as EN and serves as reference base for the European Standards for particular crane types (see Annex I).
NOTE   EN 13001-3-1 deals only with the limit state method in accordance with EN 13001-1.

  • Standard
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    109 pages
    German language
    sale 10% off
    e-Library read for
    1 day

This Technical Specification should be used together with the other relevant parts of the standard series. As such, they specify general conditions, requirements and methods to prevent hazards in hooks as part of all types of cranes.
This Technical Specification covers the following parts of hooks and types of hooks:
-   bodies of any type of point hooks made of steel forgings;
-   machined shanks of hooks with a thread/nut suspension.
NOTE 1   Principles of this Technical Specification can be applied to other types of shank hooks and also where stress concentration factors relevant to that shank construction are determined and used. Plate hooks, which are those, assembled of one or several parallel parts of rolled steel plates are not covered in this Technical Specification.
This Technical Specification is applicable to hooks from materials with ultimate strength of no more than 800 N/mm2 and yield stress of no more than 600 N/mm2.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 4 to 8 of this document are necessary to reduce or eliminate the risks associated with the following hazards:
a)   Exceeding the limits of strength (yield, ultimate, fatigue);
b)   Exceeding temperature limits of material;
c)   Unintentional disengagement of the load from the hook.
The requirements of this Technical Specification are stated in the main body of the document and are applicable to hook designs in general. The hook body and shank designs listed in Annexes A, B and G are only examples and should not be referred to as requirements of this Technical Specification.
This Technical Specification is applicable to cranes, which are manufactured after the date of approval of this standard by CEN, and serves as a reference base for product standards of particular crane types.
NOTE 2   This CEN/TS 13001-3-5 deals only with the limit state method in accordance with EN 1300

  • Technical specification
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC - Modifications to 4.2.3.4 and Figure A.3.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with Part 1 and series of Part 3 and as such they specify general conditions, requirements and methods to prevent hazards of cranes by design and theoretical verification.
NOTE   Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clause 4 is necessary to reduce or eliminate the risks associated with the following hazards:
a)   rigid body instability of the crane or its parts (tilting and shifting);
b)   exceeding the limits of strength (yield, ultimate, fatigue);
c)   elastic instability of the crane or its parts (buckling, bulging);
d)   exceeding temperature limits of material or components;
e)   exceeding the deformation limits.
This European Standard is applicable to cranes which are manufactured after the date of approval by CEN of this standard and serves as reference base for the European Standards for particular crane types.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Part 3-2 of the Technical Specification CEN/TS 13001 is used together with Part 1 and Part 2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of wire ropes in reeving systems of cranes by design and theoretical verification.
NOTE 1   Specific requirements for particular types of crane are given in the appropriate Technical Specification for the particular crane type.
Exceeding the limits of strength could result in risks to persons during normal use and foreseeable misuse. Clauses 5 to 6 of this Technical Specification are necessary to reduce or eliminate these risks.
This Technical Specification is applicable to cranes which are manufactured after the date of approval by CEN of this Technical Specification and serves as reference base for the Technical Specifications for particular crane types.
NOTE 2   CEN/TS 13001-3-2 deals only with the limit state method in accordance with EN 13001-1.

  • Technical specification
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with EN 13001-1 and EN 13001-2 and as such they specify
general conditions, requirements and methods to prevent mechanical hazards of cranes by design and
theoretical verification.
NOTE Specific requirements for particular types of cranes are given in the appropriate European Standard for the
particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to
persons during intended use and reasonably foreseeable misuse. Clauses 4 to 8 of this standard are
necessary to reduce or eliminate risks associated with the following hazards:
a) exceeding the limits of strength (yield, ultimate, fatigue);
b) exceeding temperature limits of material or components;
c) elastic instability of the crane or its parts (buckling, bulging).
This European Standard is not applicable to cranes which are manufactured before the date of its publication
as EN and serves as reference base for the European Standards for particular crane types (see Annex I).
NOTE EN 13001-3-1 deals only with the limit state method in accordance with EN 13001-1.

  • Standard
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with Part 1 and Part 2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of cranes by design and theoretical verification.
NOTE   Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 4 to 8 of this standard are necessary to reduce or eliminate the risks associated with the following hazards:
a) Exceeding the limits of strength (yield, ultimate, fatigue);
b) Exceeding temperature limits of material or components;
c) Elastic instability of the crane or its parts (buckling, bulging).
This European Standard is applicable to cranes which are manufactured after the date of approval by CEN of this standard and serves as reference base for the European Standards for particular crane types.
NOTE   prCEN/TS 13001-3-1 deals only with limit state method according to prEN 13001-1.
As an alternative to the herein presented limit state method using partial safety factors, the allowable stress method using a global safety factor according to prEN 13001-1 and prEN 13001-2 may also be applied for special crane systems with linear behaviour.
As crane structures are basically dynamically loaded only the linear theory of elasticity is applicable and only limited local plasticity is allowed. The use of the theory of plasticity for calculation of ultimate load bearing capacity is not allowed.

  • Technical specification
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with Part 1 and Part 3 and as such they specify general conditions, requirements and methods to prevent hazards of cranes by design and theoretical verification. Part 3 is only at pre-drafting stage; the use of Parts 1 and 2 is not conditional to the publication of Part 3.
NOTE   Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clause 4 of this standard is necessary to reduce or eliminate the risks associated with the following hazards:
a)   Rigid body instability of the crane or its parts (tilting and shifting).
b)   Exceeding the limits of strength (yield, ultimate, fatigue).
c)   Elastic instability of the crane or its parts (buckling, bulging).
d)   Exceeding temperature limits of material or components.
e)   Exceeding the deformation limits.
This European Standard is applicable to cranes which are manufactured after the date of approval by CEN of this standard and serves as reference base for the European Standards for particular crane types.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is to be used together with Part 1 and Part 3 and as such they specify general conditions, requirements and methods to prevent hazards of cranes by design and theoretical verification. Part 3 is only at pre-drafting stage; the use of Parts 1 and 2 is not conditional to the publication of Part 3.
NOTE   Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clause 4 of this standard is necessary to reduce or eliminate the risks associated with the following hazards:
a)   Rigid body instability of the crane or its parts (tilting and shifting).
b)   Exceeding the limits of strength (yield, ultimate, fatigue).
c)   Elastic instability of the crane or its parts (buckling, bulging).
d)   Exceeding temperature limits of material or components.
e)   Exceeding the deformation limits.
This European Standard is applicable to cranes which are manufactured after the date of approval by CEN of this standard and serves as reference base for the European Standards for particular crane types.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies general conditions, requirements and methods to prevent mechanical hazards of cranes by design and theoretical verification. Note: Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type. The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clause 4 of this standard is necessary to reduce or eliminate the risks associated with those hazards: a) rigid body instability of the crane or its parts.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This documentis to be used together with Part 2 and Part 3, and as such, they specify general conditions, requirements and methods to prevent mechanical hazards of cranes by design and theoretical verification. Part 3 is only at pre-drafting stage; the use of Parts 1 and 2 is not conditional to the publication of Part 3.
NOTE   Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clause 4 of this standard is necessary to reduce or eliminate the risks associated with the following hazards:
a)   rigid body instability of the crane or its parts (tilting, shifting);
b)   exceeding the limits of strength (yield, ultimate, fatigue);
c)   elastic instability of the crane or its parts (buckling, bulging);
d)   exceeding temperature limits of material or components;
e)   exceeding the deformation limits.
This document is applicable to cranes which are manufactured after the date of approval by CEN of this standard and serves as reference base for the European Standards for particular crane types.

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

CMC - Modification to English title, introduction, Clause 2, 3.1, 4.2.1.1, 4.2.3.4,  Figure 7, Table A.3, Figure 4, Table A.1, Figure 5, Table A.4, Figure 4, title of Table A.3 and A.4 (editorial errors)
TC - Modification to 3.2, 4.2.3.1, 4.2.3.4, 4.2.3.4, Table A.3 and Table A.6

  • Corrigendum
    8 pages
    English and German language
    sale 10% off
    e-Library read for
    1 day

This document specifies general conditions, requirements and methods to prevent mechanical hazards of cranes by design and theoretical verification. Note: Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type. The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clause 4 of this standard is necessary to reduce or eliminate the risks associated with those hazards: a) rigid body instability of the crane or its parts.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC - Modifications to 4.4.2, 4.4.4 and Figures 7 and 8
AFNOR / DIN - Modification to bibliography
CMC - Modification to Clause 2 and 4.1

  • Corrigendum
    6 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day

TC - Modification to Clause 2
CMC - Modification to Clause 2 and 3.1

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day

This Part 3-2 of the Technical Specification EN 13001 is to be used together with Part 1 and Part 2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of wire ropes in reeving systems of cranes by design and theoretical verification.
NOTE 1   Specific requirements for particular types of crane are given in the appropriate Technical Specification for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 5 to 6 of this standard are necessary to reduce or eliminate the risks associated with the following hazard:
Exceeding the limits of strength.
This Technical Specification is applicable to cranes which are manufactured after the date of approval by CEN of this standard and serves as reference base for the Technical Specifications for particular crane types.
NOTE 2   prCEN/TS 13001-3-2 deals only with limit state method according to prEN 13001-1

  • Technical specification
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day