IEC 63067:2020
(Main)Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests
Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests
IEC 63067:2020 applies to plugs and receptacles for single or multiple pole connecting devices used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class E11 according to IEC 61820-1.
Installations électriques pour l'éclairage et le balisage des aérodromes - Dispositifs de connexion - Exigences générales et essais
L'IEC 63067:2020 s'applique aux fiches et embases pour dispositifs de connexion unipolaires ou multipolaires utilisés dans le cadre d'applications de balisage aéronautique au sol.
Les exigences complémentaires et l'utilisation des dispositifs de connexion sont définies dans différentes parties de la série IEC 61820.
Les dispositifs de connexion conformes au présent document sont adaptés à une utilisation dans des conditions d'environnement de classe E11, conformément à l'IEC 61820-1.
General Information
Standards Content (Sample)
IEC 63067 ®
Edition 1.0 2020-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electrical installations for lighting and beaconing of aerodromes – Connecting
devices – General requirements and tests
Installations électriques pour l'éclairage et le balisage des aérodromes –
Dispositifs de connexion – Exigences générales et essais
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.
IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 63067 ®
Edition 1.0 2020-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electrical installations for lighting and beaconing of aerodromes – Connecting
devices – General requirements and tests
Installations électriques pour l'éclairage et le balisage des aérodromes –
Dispositifs de connexion – Exigences générales et essais
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50; 93.120 ISBN 978-2-8322-8516-9
– 2 – IEC 63067:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General requirements . 8
5 General remarks on tests . 9
6 Ratings . 9
7 Classification . 9
8 Marking and documentation . 10
9 Checking of dimensions . 11
10 Protection against electric shock . 13
11 Provision for continuity of screened cable . 13
12 Terminations of conductors . 14
12.1 General . 14
12.2 Terminations for connecting devices which are attached to conductor(s) on
the field. 14
12.3 Terminals for screen continuity . 14
13 Construction of connecting device and their assemblies . 15
13.1 Housing . 15
13.2 Pins and sockets . 15
13.3 Caps . 15
13.4 Connecting device assemblies . 15
13.4.1 Class A . 15
13.4.2 Class B . 16
14 Protection against ingress of water . 17
15 Insulation resistance and electrical connection of connecting device assembly . 17
15.1 General . 17
15.2 Insulation resistance of plugs and receptacles . 17
15.3 Insulation resistance of connecting device assembly . 18
15.4 Electrical connection of contact assembly . 19
16 Forces necessary to disengage and engage the parts of the connecting devices . 19
17 Cables and their connection . 20
18 Resistance to weathering, corrosion and chemical materials . 21
19 Resistance to UV-radiation . 21
Annex A (normative) Production test . 22
A.1 General . 22
A.2 Production test . 22
A.2.1 Dielectric test . 22
A.2.2 Continuity test . 22
A.2.3 Test results. 22
Bibliography . 23
Figure 1 – Primary plug (IEC 61823) . 11
Figure 2 – Primary receptacle (IEC 61823) . 11
Figure 3 – Secondary plug . 12
Figure 4 – Secondary receptacle. 12
Figure 5 – Secondary receptacle with moulded frangible coupler . 13
Figure 6 – Example of test arrangement to verify the fixation of pins in the body of the
insertion piece . 17
Figure 7 – Example of voltage drop test arrangement . 19
Figure 8 – Example of apparatus for verification of withdrawal force . 20
Table 1 – Classification of connecting devices . 10
Table 2 – Interface dimensions of primary plug and receptacle . 12
Table 3 – Interface dimensions for secondary plugs and receptacles . 13
– 4 – IEC 63067:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL INSTALLATIONS
FOR LIGHTING AND BEACONING OF AERODROMES –
CONNECTING DEVICES – GENERAL REQUIREMENTS AND TESTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.