EN 50598-3:2015
(Main)Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations
Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations
This part of EN 50598 specifies the process and requirements to implement environmentally conscious product design principles, to evaluate ecodesign performance and to communicate potential environmental impacts for power electronics (e.g. complete drive modules, CDM), power drive systems and motor starters, all used for motor driven equipment in the power range of 0,12 kW up to 1 000 kW and low voltage (up to 1 000 V) applications over the whole life cycle. It defines the content for 2 different environmental declarations based on EN ISO 14021: - The basic version - which, in this context, will be referred to as an environmental declaration type II, with basic data and qualitative statements on ecodesign. - The full version - which, in this context, will be referred to as an environmental declaration type II+, based upon a life cycle assessment and including quantitatively evaluated potential environmental impacts. For that the general principles of EN ISO 14025 are taken into account and product category rules [PCR] for motor system components are included to ensure a harmonized approach. This part of EN 50598 is harmonized with the applicable generic and horizontal environmental standards and contains the additional details relevant in this context for the above mentioned products.
Ökodesign für Antriebssysteme, Motorstarter, Leistungselektronik und deren angetriebene Einrichtungen - Teil 3: Quantitativer Ökodesign-Ansatz mittels Ökobilanz einschließlich Produktkategorieregeln und des Inhaltes von Umweltdeklarationen
Dieser Teil von EN 50598 legt den Prozess der Implementierung von Grundsätzen für ein umweltbewusstes Produktdesign, der Bewertung der Ökodesignleistung und der Kommunikation der möglichen Umweltwirkun-gen von Antriebssystemen, Motorstartern, Leistungselektronik (z. B. vollständigen Antriebsmodulen, CDM) für Motorantriebsanwendungen im Niederspannungsbereich (unter 1 000 V) und im Leistungsbereich von 0,12 kW bis 1 000 kW über den gesamten Lebenszyklus und die entsprechenden Anforderungen fest. Er legt den Inhalt von zwei verschiedenen Arten von Umweltdeklarationen fest: – die Grundversion, eine Typ II-Umweltdeklaration mit Basisdaten und qualitativen Angaben zum Öko-design, wie in EN ISO 14021 festgelegt; – die Vollversion, eine Typ III-Umweltdeklaration, wie in EN ISO 14025 festgelegt, einschließlich quantitativ bewerteter möglicher Umweltauswirkungen. Hierfür wurden Produktkategorie-Regeln (en: Product Category Rules – PCR) für Motorsystemkomponenten aufgenommen, um eine harmonisierte Methodik für die Erstellung von Ökobilanzen sicherzustellen. Dieser Teil von EN 50598 ist mit den anwendbaren generischen und horizontalen Umweltnormen harmonisiert und enthält zusätzliche Einzelheiten, die für die oben genannten Produkte maßgeblich sind. Dieser Teil von EN 50598 gilt für die Komponenten eines Motorsystems nach der Definition in EN 50XXX 1.
Ecoconception des entraînements électriques de puissance, des démarreurs de moteur, de l'électronique de puissance et de leurs applications entraînées - Partie 3: Approche quantitative d'écoconception par l'évaluation du cycle de vie, comprenant les règles relatives aux catégories de produits et le contenu des déclarations environnementales
La présente partie de la norme qui porte la référence EN 5xxxx pour l'écoconception spécifie le processus et les exigences liés à la mise en œuvre de principes de conception des produits tenant compte de l'environnement, à l'évaluation des performances en termes d'écoconception et à la communication des impacts environnementaux potentiels pour les entraînements électriques de puissance (PDS), les démarreurs de moteur et l'électronique de puissance (par exemple modules d'entraînement complet, CDM) qu'on utilise dans les applications entraînées par moteur (charges entraînées par moteur) pour basse tension (inférieure à 1 000 V) et la plage allant de 0,12 kW à 1 000 kW, et ce pendant l'intégralité du cycle de vie. Elle définit le contenu de deux types différents de déclaration environnementale: - la version de base, une déclaration environnementale de type II, avec des données de base et des énoncés qualitatifs sur l'écoconception, telle que définie dans l’EN ISO 14021 - la version complète, une déclaration environnementale de type III, avec les impacts environnementaux potentiels évalués quantitativement, telle que définie dans l’EN ISO 14025. Pour cela, les règles relatives aux catégories de produits [PCR] pour les composants des systèmes de moteur sont incluses afin d'assurer l'harmonisation de la méthodologie d'analyse du cycle de vie. La présente norme est harmonisée avec les normes environnementales génériques et horizontales applicables et contient les détails supplémentaires qui sont pertinents pour les produits susmentionnés. La présente norme s'applique aux composants d'un système de moteur tel que défini dans l’EN 50XXX-1.
Okoljsko primerna zasnova motornih pogonskih sistemov, motornih zaganjalnikov, močnostne elektronike in njihove aplikacije, ki jih ti poganjajo - 3. del: Kvantitativni pristop k okoljsko primerni zasnovi z ocenjevanjem življenjskega cikla, vključno s pravili za kategorijo proizvoda in vsebino okoljskih deklaracij
Ta del standarda EN 50598 določa postopke in zahteve za vpeljavo okoljsko ozaveščenih principov projektiranja izdelkov, za vrednotenje zmogljivosti okoljsko primernih zasnov in za poročanje o možnih vplivih na okolje motorno gnanih sistemov, motornih zaganjalnikov in močnostne elektronike (npr. celoviti pogonski moduli, CMD), ki se uporabljajo v motorno gnanih aplikacijah (motorskih pogonih) nizke napetosti (manj od 1000 V) in v razponu moči od 0,12 kW do 1000 kW, med celotnim življenjskim ciklom.
Opredeljuje vsebino za dva različna tipa okoljske deklaracije:
– osnovno različico, okoljsko deklaracijo tipa II z osnovnimi podatki in kvalitativnimi izjavami glede okoljsko primernih zasnov, kot so določene v standardu EN ISO 14021
– polno različico, okoljsko deklaracijo tipa III, kot je določena v standardu EN ISO 14025, vključno s kvalitativno overdnotenimi možnimi vplivi na okolje. Tako so pravila za kategorije proizvodov [PCR] za komponente motornih sistemov vključena za zagotavljanje usklajene metodologije za ocenjevanje življenjskega cikla.
Ta del standarda EN 50598 je usklajen z ustreznimi splošnimi in horizontalnimi okoljskimi standardi ter vsebuje dodatne podrobnosti, ki so relevantne za zgoraj omenjene proizvode.
Ta del standarda EN 50598 se uporablja za komponente motornih sistemov, opredeljenih v standardu EN 50XXX 1.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2015
2NROMVNRSULPHUQD]DVQRYDPRWRUQLKSRJRQVNLKVLVWHPRYPRWRUQLK
]DJDQMDOQLNRYPRþQRVWQHHOHNWURQLNHLQQMLKRYHDSOLNDFLMHNLMLKWLSRJDQMDMR
GHO .YDQWLWDWLYQLSULVWRSNRNROMVNRSULPHUQL]DVQRYL]RFHQMHYDQMHPåLYOMHQMVNHJD
FLNODYNOMXþQRVSUDYLOL]DNDWHJRULMRSURL]YRGDLQYVHELQRRNROMVNLKGHNODUDFLM
Ecodesign for power drive systems, motor starters, power electronics & their driven
applications - Part 3: Quantitative eco design approach through life cycle assessment
including product category rules and the content of environmental declarations
Ökodesign für Antriebssysteme, Motorstarter, Leistungselektronik und deren
angetriebene Einrichtungen -- Teil 3: Quantitativer Ökodesign-Ansatz mittels
Ökobilanzierung einschließlich Produktkategorieregeln und dem Inhalt von
Umweltdeklarationen
Ecoconception des entraînements électriques de puissance, des démarreurs de moteur,
de l'électronique de puissance et de leurs applications entraînées -- Partie 3: Approche
quantitative d'écoconception par l'évaluation du cycle de vie, comprenant les règles
relatives aux catégories de produits et le contenu des déclarations environnementales
Ta slovenski standard je istoveten z: EN 50598-3:2015
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
29.160.30 Motorji Motors
31.020 Elektronske komponente na Electronic components in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50598-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2015
ICS 13.020.20; 29.160.30
English Version
Ecodesign for power drive systems, motor starters, power
electronics and their driven applications - Part 3: Quantitative
eco design approach through life cycle assessment including
product category rules and the content of environmental
declarations
Ecoconception des entraînements électriques de Ökodesign für Antriebssysteme, Motorstarter,
puissance, des démarreurs de moteur, de l'électronique de Leistungselektronik und deren angetriebene Einrichtungen -
puissance et de leurs applications entraînées - Partie 3: Teil 3: Quantitativer Ökodesign-Ansatz mittels Ökobilanz
Approche quantitative d'écoconception par l'évaluation du einschließlich Produktkategorieregeln und des Inhaltes von
cycle de vie, comprenant les règles relatives aux catégories Umweltdeklarationen
de produits et le contenu des déclarations
environnementales
This European Standard was approved by CENELEC on 2015-01-05. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50598-3:2015 E
Contents Page
Foreword.4
Introduction .5
1 Scope .7
2 Normative references .7
3 Terms and definitions .8
4 Description of the elements of ecodesign and environmental declarations of a motor
system . 14
4.1 General . 14
4.2 Environmentally conscious design . 15
4.3 Environmental declaration . 15
5 Basic environmentally conscious design and declaration requirements . 17
5.1 Basic ecodesign requirements . 17
5.2 Basic content of an environmental declaration type II . 17
5.2.1 General . 17
5.2.2 Information about the manufacturer . 17
5.2.3 Description of the product family, the reference product and its packaging . 17
5.2.4 Constitutive materials and substances . 17
5.2.5 Use phase . 19
5.2.6 End of life . 19
6 Full environmentally conscious design and declaration requirements . 20
6.1 Full ecodesign requirements . 20
6.2 Content of an environmental declaration type II+ . 20
6.2.1 General . 20
6.2.2 Information about the manufacturer . 20
6.2.3 Description of the product family, the reference product and its packaging . 20
6.2.4 Constitutive materials and Substances . 21
6.2.5 Information on life cycle stages and potential impacts . 21
6.2.6 Other environment-related information (optional) . 25
6.2.7 References within the environmental declaration . 25
6.3 Verification of the environmentally conscious design and declaration process . 25
7 Basic product category rules (Core PCR) . 25
7.1 Objective . 25
7.2 General information. 25
7.3 Other requirements for an type II+ environmental declaration . 26
7.4 Software tool . 26
7.5 Product description . 26
7.6 Functional unit . 26
7.7 Basic cut-off rules . 26
7.8 Product parts . 27
7.9 Materials and chemical substances . 27
7.10 System boundaries . 27
7.11 Manufacturing phase. 27
7.12 Usage phase . 28
7.12.1 General . 28
7.12.2 Applied usage scenario and duty profile . 28
7.13 End-of-life phase . 29
7.14 Allocation rules . 29
7.15 Units . 29
7.16 Calculation rules and requirements for data quality . 30
7.16.1 General requirements . 30
7.16.2 Data quality in the manufacturing phase . 30
7.16.3 Data quality in the usage phase . 30
7.16.4 End-of-life and recycling . 31
Annex A (informative) Environmental aspects in environmentally conscious design . 32
A.1 General . 32
A.2 Scope . 32
A.3 General considerations . 32
A.4 Inputs and outputs to be considered . 32
Annex B (normative) Scaling functions for deriving potential environmental impacts for full
environmental declarations homogeneous product families . 36
B.1 General . 36
B.2 Scaling functions for homogeneous product families . 36
Annex C (normative) Further specifications for certain product categories in terms of product
specific rules (PSR) . 38
C.1 General . 38
C.2 Scope . 38
C.3 Further specifications on motor systems components . 38
Annex D (normative) Usage of environmental declaration in the extended product view . 42
D.1 General . 42
D.2 environmental declaration of a driven application . 42
Annex E (informative) Template for an environmental declaration . 44
E.1 General . 44
E.2 Basic template . 44
Bibliography . 48
Foreword
This document (EN 50598-3:2015) has been prepared by CLC/TC 22X “Power electronics”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2016-01-05
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2018-01-05
conflicting with this document have to
be withdrawn
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
CLC/TC 22X/WG 6 as the standardization Task Force dealing with Mandate M
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.