EN 50413:2019
(Main)Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
This document provides general methods for measurement and calculation of quantities associated with human exposure to electromagnetic fields in the frequency range from 0 Hz to 300 GHz. It is intended specifically to be used for the assessment of emissions from products and comparison of these with the exposure limits for the general public given in Council Recommendation 1999/519/EC, and those given for workers in Directive 2013/35/EU, as appropriate. It also is intended to be used for assessment of human exposure to electromagnetic fields in the workplace to determine compliance with the requirements of Directive 2013/35/EU. This standard deals with quantities that can be measured or calculated external to the body, notably electric and magnetic field strength or power density, and includes the measurement and calculation of quantities inside the body that form the basis for protection guidelines. In particular the standard provides information on: — definitions and terminology, — characteristics of electromagnetic fields, — measurement of exposure quantities, — instrumentation requirements, — methods of calibration, — measurement techniques and procedures for evaluating exposure, — calculation methods for exposure assessment. Where an applicable electromagnetic field standard specific to a product or technology exists it is expected to be used rather than this document. EN 62311:—, Table 1 gives a list of relevant standards.
Grundnorm zu Mess- und Berechnungsverfahren der Exposition von Personen in elektrischen, magnetischen und elektromagnetischen Feldern (0 Hz bis 300 GHz)
Norme de base pour les procédures de mesures et de calculs pour l'exposition des personnes aux champs électriques, magnétiques et électromagnétiques (0 Hz - 300 GHz)
Osnovni standard za merjenje in izračunavanje izpostavljenosti ljudi električnim, magnetnim in elektromagnetnim poljem (0 Hz–300 GHz)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50413:2021
01-junij-2021
Nadomešča:
SIST EN 50413:2009
SIST EN 50413:2009/A1:2014
Osnovni standard za merjenje in izračunavanje izpostavljenosti ljudi električnim,
magnetnim in elektromagnetnim poljem (0 Hz–300 GHz)
Basic standard on measurement and calculation procedures for human exposure to
electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
Grundnorm zu Mess- und Berechnungsverfahren der Exposition von Personen in
elektrischen, magnetischen und elektromagnetischen Feldern (0 Hz bis 300 GHz)
Norme de base pour les procédures de mesures et de calculs pour l'exposition des
personnes aux champs électriques, magnétiques et électromagnétiques (0 Hz - 300
GHz)
Ta slovenski standard je istoveten z: EN 50413:2019
ICS:
13.280 Varstvo pred sevanjem Radiation protection
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 50413:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50413:2021
---------------------- Page: 2 ----------------------
SIST EN 50413:2021
EUROPEAN STANDARD EN 50413
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2019
ICS 17.200.20; 33.100.01 Supersedes EN 50413:2008 and all of its amendments
and corrigenda (if any)
English Version
Basic standard on measurement and calculation procedures for
human exposure to electric, magnetic and electromagnetic fields
(0 Hz - 300 GHz)
Norme de base pour les procédures de mesures et de Grundnorm zu Mess- und Berechnungsverfahren der
calculs pour l'exposition des personnes aux champs Exposition von Personen in elektrischen, magnetischen und
électriques, magnétiques et électromagnétiques (0 Hz - 300 elektromagnetischen Feldern (0 Hz bis 300 GHz)
GHz)
This European Standard was approved by CENELEC on 2019-09-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50413:2019 E
---------------------- Page: 3 ----------------------
SIST EN 50413:2021
EN 50413:2019 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 General . 12
4.1 General remarks. 12
4.2 Exposure assessment approaches . 12
4.3 Characterization of the field source. 12
4.4 Static and low frequency fields . 13
4
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.