FprEN ISO 8092-2

SLOVENSKI STANDARD
oSIST prEN ISO 8092-2:2023
01-februar-2023
Cestna vozila - Priključki za električno opremo, vgrajeni na armaturi vozila - 2. del:
Definicije, preskusne metode in splošne zahtevane lastnosti (ISO/DIS 8092-2:2022)
Road vehicles - Connections for on-board electrical wiring harnesses - Part 2:
Definitions, test methods and general performance requirements (ISO/DIS 8092-2:2022)
Straßenfahrzeuge - Steckverbindungen für das elektrische Fahrzeug-Bordnetz - Teil 2:
Begriffe, Prüfungen und allgemeine Anforderungen (ISO/DIS 8092-2:2022)
Véhicules routiers - Connexions pour faisceaux de câblage électrique embarqués -
Partie 2: Définitions, méthodes d'essai et exigences de performances générales
(ISO/DIS 8092-2:2022)
Ta slovenski standard je istoveten z: prEN ISO 8092-2
ICS:
43.040.10 Električna in elektronska Electrical and electronic
oprema equipment
oSIST prEN ISO 8092-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 8092-2:2023
oSIST prEN ISO 8092-2:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8092-2
ISO/TC 22/SC 32 Secretariat: JISC
Voting begins on: Voting terminates on:
2022-12-19 2023-03-13
Road vehicles — Connections for on-board electrical
wiring harnesses —
Part 2:
Definitions, test methods and general performance
requirements
Véhicules routiers — Connexions pour faisceaux de câblage électrique embarqués —
Partie 2: Définitions, méthodes d'essai et exigences de performances générales
ICS: 43.040.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8092-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

oSIST prEN ISO 8092-2:2023
ISO/DIS 8092-2:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8092-2
ISO/TC 22/SC 32 Secretariat: JISC
Voting begins on: Voting terminates on:

Road vehicles — Connections for on-board electrical
wiring harnesses —
Part 2:
Definitions, test methods and general performance
requirements
Véhicules routiers — Connexions pour faisceaux de câblage électrique embarqués —
Partie 2: Définitions, méthodes d'essai et exigences de performances générales
ICS: 43.040.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 8092-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

oSIST prEN ISO 8092-2:2023
ISO/DIS 8092-2:2022(E)
32 Contents
33 Foreword . iv
34 1 Scope . 1
35 2 Normative references . 1
36 3 Terms and definitions . 2
37 4 Test conditions and requirements . 4
38 4.1 General . 4
39 4.2 Visual Examination . 11
40 5 Mechanical tests . 12
41 5.1 Connection and disconnection . 12
42 5.2 Mating force – measurement and classification . 13
43 5.3 Unlocking force – measurement and classification . 13
44 5.4 Unmating force – measurement and classification . 13
45 5.5 Locking device strength . 13
46 5.6 Unintentional lever release force . 14
47 5.7 Locking force for CPA function . 14
48 5.8 Disengage force for CPA function . 17
49 5.9 Locking force for TPA . 17
50 5.10 Disengage force for TPA . 18
51 5.11 Effectiveness of connector coding and polarization . 18
52 5.12 Connector engagement sound . 19
53 5.13 Terminal insertion force (TPA disengaged) . 19
54 5.14 Terminal insertion force (TPA engaged) . 20
55 5.15 Terminal insertion force with incorrect orientation . 21
56 5.16 Terminal extraction force . 22
57 5.17 Tensile strength of connection between terminal and wire . 23
58 6 Electrical tests . 25
59 6.1 Connection resistance (voltage drop) . 25
60 6.2 Temperature rise . 27
61 6.3 Current cycling at ambient temperature . 29
62 6.4 Insulation resistance . 29
63 6.5 Withstand voltage . 30
64 7 Environmental tests . 31
65 7.1 Thermal shock . 31
66 7.2 Thermal aging . 32
67 7.3 Temperature and humidity cycle . 32
68 7.4 Vibration with thermal cycling . 35
69 7.5 Mechanical shock . 37
70 7.6 Drop . 37
71 7.7 Water tightness . 38
72 7.8 Water tightness, dynamic . 40
73 7.9 High-pressure/steam-jet cleaning . 42
74 7.10 Salt spray . 44
75 7.11 Dust resistance . 44
76 7.12 Chemical loads . 45
77 7.13 Fretting corrosion . 45
78 7.14 Friction corrosion . 46
79 Bibliography . 47
© ISO #### – All rights reserved iii

oSIST prEN ISO 8092-2:2023
ISO/DIS 8092-2:2022(E)
81 Foreword
82 ISO (the International Organization for Standardization) is a worldwide federation of national standards
83 bodies (ISO member bodies). The work of preparing International Standards is normally carried out
84 through ISO technical committees. Each member body interested in a subject for which a technical
85 committee has been established has the right to be represented on that committee. International
86 organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
87 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
88 electrotechnical standardization.
89 The procedures used to develop this document and those intended for its further maintenance are
90 described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
91 different types of ISO documents should be noted. This document was drafted in accordance with the
92 editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
93 Attention is drawn to the possibility that some of the elements of this document may be the subject of
94 patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
95 patent rights identified during the development of the document will be in the Introduction and/or on
96 the ISO list of patent declarations received (see www.iso.org/patents).
97 Any trade name used in this document is information given for the convenience of users and does not
98 constitute an endorsement.
99 For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
100 expressions related to conformity assessment, as well as information about ISO's adherence to the World
101 Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
102 www.iso.org/iso/foreword.html.
103 This document was prepared by Technical Committee ISO/TC 22,Road vehicles, Subcommittee SC 32,
104 Electrical and electronic components and general system aspects.
105 This fifth edition cancels and replaces the fourth edition (ISO 8092-2:2005), which has been technically
106 revised.
107 The main changes compared to the previous edition are as follows:
108 —      adoption of the content according to new technical requirements,
109 —      adoption of the content according to the new version of the ISO guidelines,
110 —      correction of the typos and mi
...