43.040.10 - Electrical and electronic equipment

This document specifies fuse-links with tabs (blade-type) Type L (high current miniature) for use in road vehicles. It establishes, for this fuse-link type, the rated current, test procedures, performance requirements and dimensions. This document is applicable for fuse-links with a rated voltage of 32 V, a current rating of ≤60 A and a breaking capacity of 1 000 A intended for use in road vehicles. This document is intended to be used in conjunction with ISO 8820-1 and ISO 8820-2. The numbering...view more

This document specifies the following items to complement ISO/IEC /IEEE 8802‑3: — interface between reconciliation sublayer and physical entity including reduced gigabit media independent interface (RGMII); — common physical entity wake-up and synchronised link sleep functionalities independent from physical media and transmission bit rate. The optical and electrical component requirements and test methods for optical and electrical transmission of in-vehicle Ethernet are not in the scope of thi...view more

This document defines the terms which are used in the ISO 21111 series and provides an overview of the standards for in-vehicle Ethernet including the complementary relations to ISO/IEC/IEEE 8802‑3:2017[7] and its amendments, the document structure in accordance with OSI reference model specified in ISO/IEC 7498‑1[1] and ISO/IEC 10731:1994,[2] type of physical entities, in-vehicle Ethernet specific functionalities, and so on.

This document covers requirements and tests for the electric and electronic components in road vehicles equipped with an electrical system operating at a nominal voltage of 48 V DC. This includes the following: — general requirements on 48 V DC electrical systems; — voltage ranges; — slow voltage transients and fluctuations (not including EMC).

This document specifies dimensional characteristics, contact allocation, tests and requirements of 7-pole connectors for electrical connections of electronically monitored charging systems of towing and towed vehicles. The electronic monitoring system is designed to detect 12 V and 24 V nominal supply voltage and to limit the current to 50 A, and this is a connector without any braking capacity. This electrical connection is intended for use with separable truck-trailer combinations in order to ...view more

This document specifies requirements for lithium-ion traction battery packs or systems used in battery electric, hybrid electric and fuel cell electric road vehicles. This document describes the most relevant environmental stresses and specifies tests and test boundary conditions. This document establishes a classification of battery packs or systems and defines different stress levels for testing when a classification is applicable and required. The objective of this document is to specify stan...view more

IEC 62321-3-2:2020 is available as IEC 62321-3-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62321-3-2:2020 specifies the screening analysis of fluorine, chlorine and bromine in polymers and electronics using combustion-ion chromatography (C-IC). IEC 62321-3-2:2020 cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This editio...view more

This document specifies: — requirements on the physical layer at system level, — requirements on the interoperability test set-ups, — interoperability test plan that checks the requirements for the physical layer at system level, — requirements on the device-level physical layer conformance test set-ups, and — device-level physical layer conformance test plan that checks a set of requirements for the OSI physical layer that are relevant for device vendors. The interoperability test plan checks t...view more

This document provides supplemental specifications to a physical layer capable of transmitting 1 Gbit/s over plastic optical fibre compliant with ISO/IEC/IEEE 8802-3:2017/Amd 9:2018, with specific application to communications inside road vehicles. Additionally, there is a test plan specified for conformance testing. The test plan includes test cases to assure compliance of an IUT with the functionality specified in this document. ISO/IEC/IEEE 8802-3:2017/Amd 9:2018 is considered indispensable f...view more

IEC 62321-10:2020 specifies one normative technique for the determination of polycyclic aromatic hydrocarbons (PAHs) in polymers of electrotechnical products. These PAHs can especially be found in the plastic and rubber parts of a wide range of consumer articles. They are present as impurities in some of the raw materials used in the production of such articles, in particular in extender oils and in carbon black. They are not added intentionally to the articles and do not perform any specific fu...view more

This document specifies fuse-links with tabs (blade-type) Type M (medium-high current) for use in road vehicles. It establishes, for this fuse-link type, the rated current, test procedures, performance requirements and dimensions. This document is applicable for fuse-links with a rated voltage of 32 V and a current rating of ≤80 A and a breaking capacity of 1 000 A intended for use in road vehicles. This document is intended to be used in conjunction with ISO 8820‑1 and ISO 8820‑2. The numbering...view more

This document gives the dimensions of, and specifies the contact allocation and tests and test requirements for, 15-pole connectors for the electrical connection of equipment other than braking systems and running gear of towing and towed vehicles with 24 V nominal supply voltage. It specifies a park socket used to receive and store the plug when disconnected, and a means of adaptation between 7-pole and 15 pole connectors.

This document specifies test methods and procedures to ensure the compatibility to conducted electrical transients along shielded high voltage supply lines of equipment installed on passenger cars and commercial vehicles fitted with electrical systems with voltages higher than 60 V d.c. and lower than 1 500 V d.c. and a power supply isolated from the vehicle body. It describes bench tests for both, injection and measurement of transients. It is applicable to all types of electrical independent d...view more

This document specifies harness excitation test methods and procedures for determining the immunity of electronic components of passenger cars and commercial vehicles regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric motor). The bulk current injection (BCI) test method is based on current injection into the wiring harness using a current probe as a transformer where the harness forms the secondary winding. The tubular wave coupler (TWC) test method is based...view more

This document specifies the optical components requirements and test methods for optical gigabit transmission of in-vehicle Ethernet. Safety (electrical safety, protection, fire, etc.) and electromagnetic compatibility (EMC) requirements are outside the scope of this document.

This document specifies fuse-links with tabs (blade-type) Type P (sub miniature three tabs) for use in road vehicles. It establishes, for this fuse-link type, the rated current, test procedures, performance requirements and dimensions. This document is applicable for fuse-links with a rated voltage of 32 V a current rating of ≤30 A and a breaking capacity of 1 000 A intended for use in road vehicles. This document is intended to be used in conjunction with ISO 8820‑1 and with ISO 8820‑2. The num...view more

This document specifies fuse-links with tabs (blade-type) Type N (sub miniature), for use in road vehicles. It establishes, for this fuse-link type, the rated current, test procedures, performance requirements and dimensions. This document is applicable for fuse-links with a rated voltage of 32 V a current rating of ≤30 A and a breaking capacity of 1 000 A intended for use in road vehicles. This document is intended to be used in conjunction with ISO 8820‑1 and with ISO 8820‑2. The numbering of ...view more

This document specifies the requirements for secured and unsecured diagnostic communication between client DoIP entity and server(s) installed in the vehicle using Internet protocol (IP) as well as the transmission control protocol (TCP) and user datagram protocol (UDP). This includes the definition of vehicle gateway requirements (e.g. for integration into an existing computer network) and test equipment (client DoIP entity) requirements (e.g. to detect and establish communication with a vehicl...view more

This document specifies the performance criteria and requirements of a three-way connection interface, including ground connection, linking the pyrotechnic device and harness connector built into a road vehicle. Performance criteria and requirements are defined for a sealed variant of the pyrotechnic device/initiator harness connector assembly (see Annex A). Performance criteria and requirements are defined for a two-way (without ground) variant of the pyrotechnic device/initiator harness connec...view more

This document defines terms and specifies test methods for general performance requirements of voltage class B connectors with single-pole and multi-pole connections used with electrical wiring harnesses of road vehicles. This document applies to connectors for voltage class B electric circuits of electric propulsion systems and conductively connected auxiliary electric systems of electrically propelled road vehicles. This document applies to voltage class B connectors designed to be disconnecte...view more