43.040 - Road vehicle systems

This document specifies fuse-links with tabs (blade-type) Type L (high current miniature) for use in road vehicles. It establishes, for this fuse-link type, the rated current, test procedures, performance requirements and dimensions. This document is applicable for fuse-links with a rated voltage of 32 V, a current rating of ≤60 A and a breaking capacity of 1 000 A intended for use in road vehicles. This document is intended to be used in conjunction with ISO 8820-1 and ISO 8820-2. The numbering...view more

This document specifies the in-vehicle information (IVI) data structures that are required by different intelligent transport system (ITS) services for exchanging information between ITS Stations (ITS-S). A general, extensible data structure is specified, which is split into structures called containers to accommodate current-day information. Transmitted information includes IVI such as contextual speed, road works warnings, vehicle restrictions, lane restrictions, road hazard warnings, location...view more

This document specifies the conformance test plans for the CXPI data link layer and the CXPI physical layer. It also specifies the conformance test plan for error detection. Additionally, this document describes the concept of conformance test plan operation.

This document specifies the conformance test plan for ISO 20794-2:2020 implementations. It specifies conformance test cases related to: — concept of operation; — network management; — transfer management; and — error management.

This document establishes the positioning zones, dimensions and general and static strength requirements for lower tether anchorages. Lower tether anchorages can be used together with seat bight anchorages according to ISO 13216-1, or with other methods for anchoring child restraint systems (CRS) in road vehicles. This document is applicable to all seating positions, intended by the vehicle manufacturer, for use with rearward-facing CRSs. These seating positions can include outer and mid positio...view more

This document specifies the conformance test plan for the 150-Mbit/s optical physical layer for MOST (MOST150 oPHY), a synchronous time-division-multiplexing network. This document specifies the basic conformance test measurement methods, relevant for verifying compatibility of networks, nodes, and MOST components with the requirements specified in ISO 21806-8[eXtyles1] . [eXtyles1]ISO 21806-8: current stage is 50.00

This document specifies the following items to complement ISO/IEC /IEEE 8802‑3: — interface between reconciliation sublayer and physical entity including reduced gigabit media independent interface (RGMII); — common physical entity wake-up and synchronised link sleep functionalities independent from physical media and transmission bit rate. The optical and electrical component requirements and test methods for optical and electrical transmission of in-vehicle Ethernet are not in the scope of thi...view more

This document specifies the 150-Mbit/s optical physical layer for MOST (MOST150 oPHY), a synchronous time-division-multiplexing network. This document specifies the applicable constraints and defines interfaces and parameters, suitable for the development of products based on MOST150 oPHY. Such products include fibre optical links and connectors, fibre optic receivers, fibre optic transmitters, electrical to optical converters, and optical to electrical converters. This document also establishes...view more

This document defines the terms which are used in the ISO 21111 series and provides an overview of the standards for in-vehicle Ethernet including the complementary relations to ISO/IEC/IEEE 8802‑3:2017[7] and its amendments, the document structure in accordance with OSI reference model specified in ISO/IEC 7498‑1[1] and ISO/IEC 10731:1994,[2] type of physical entities, in-vehicle Ethernet specific functionalities, and so on.

This document specifies the conformance test plan (CTP) for the application layer for MOST, a synchronous time-division-multiplexing network, as specified in ISO 21806-2. This document specifies conformance test cases (CTCs) in the following categories: — device model; — data and basic data types; — registry management; — connection management; — error management; — diagnosis. Interoperability testing is not in the scope of this document.

This document specifies the requirements of the physical and data link layer of a wireless High Level
Communication (HLC) between Electric Vehicles (EV) and the Electric Vehicle Supply Equipment
(EVSE). The wireless communication technology is used as an alternative to the wired communication
technology as defined in ISO 15118-3.
It covers the overall information exchange between all actors involved in the electrical energy exchange.
ISO 15118 (all parts) are applicable for conductive charg...view more

This document specifies the transport and network layer conformance test plan, which tests the transportation of diagnostic communication, node configuration data and network layer services using the service interface parameters reported by the lower OSI layers and submitted to the higher OSI layers. The transport layer and network layer conformance test plan contain the following descriptions: — concept of operation conformance test plan; — transport layer protocol conformance test plan; — netw...view more

This document specifies the in-vehicle information (IVI) data structures that are required by different intelligent transport system (ITS) services for exchanging information between ITS Stations (ITS-S). A general, extensible data structure is specified, which is split into structures called containers to accommodate current-day information. Transmitted information includes IVI such as contextual speed, road works warnings, vehicle restrictions, lane restrictions, road hazard warnings, location...view more

This document specifies the conformance test plan (CTP) for the transport layer and network layer for MOST, a synchronous time-division-multiplexing network, as specified in ISO 21806-4. This document specifies conformance test cases (CTCs) in the following categories: — network layer services; — data transport mechanism; — dynamic behaviour of a node. Interoperability testing is not in the scope of this document.

This document specifies a part of the application, the application layer, and the presentation layer. The application covers the — device model, — registry management, — connection management for streaming data, — diagnosis, and — error handling. The application layer covers the structure of MOST messages consisting of — addressing, — function block identifiers, — instance identifiers, — function identifiers, — operation types, and — timing definitions. The presentation layer covers the definiti...view more

This document specifies technical requirements related to the MOST data link layer functionality. A MOST network is comprised of two or more nodes connected through a physical layer. The data link layer functionality is provided by each node. On each network, all nodes are synchronised and one node provides the system clock. This node is the TimingMaster, while all other nodes are TimingSlaves. The timing configuration of the node (TimingMaster or TimingSlave) determines the tasks that need to b...view more

This document specifies technical requirements related to the MOST transport layer and network layer functionality: — the service interface to application layer; — the network layer services; — the data transport mechanism; — the dynamic behaviour of a node; — the network error management.

This document provides general information and definitions for Media Oriented Systems Transport (MOST), a synchronous time-division-multiplexing network. This document describes the access to MOST specifications, which are referenced by the ISO 21806 series.

This document specifies the conformance test plan (CTP) for the data link layer for MOST, a synchronous time-division-multiplexing network, as specified in ISO 21806-6. This document specifies conformance test cases (CTCs) in the following categories: — network frames; — allocation channel; — protected system channel; — timestamp channel; — flow control; — cyclic redundancy check; — arbitration; — default packet channel. Interoperability testing is not in the scope of this document.