EN 12373-2:1998
(Main)Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
This part of this European Standard specifies a gravimetric method for determining the mass per unit area (surface density) of anodic oxidation coatings on aluminium and its alloys. The method is applicable to all oxide coatings formed by anodizing aluminium and its alloys, either cast or wrought, and is suitable for most aluminium alloys except those in which the copper content is greater than 6 %.
Aluminium und Aluminiumlegierungen - Anodisieren - Teil 2: Bestimmung der Masse je Flächeneinheit (flächenbezogene Masse) von anodisch erzeugten Oxidschichten - Gravimetrisches Verfahren
Dieser Teil dieser Europäischen Norm legt ein gravimetrisches Verfahren zur Bestimmung der Masse je Flächeneinheit (flächenbezogene Masse) anodisch erzeugter Oxidschichten auf Aluminium und Aluminiumlegierungen fest. Das Verfahren ist auf alle Oxidschichten anwendbar, die durch anodische Oxidation von Aluminium, Aluminium-Guß- und -Knetlegierungen erzeugt werden. Es ist für die meisten Aluminiumlegierungen geeignet, ausgenommen für Legierungen mit einem Massenanteil von Kupfer über 6 %.
Aluminium et alliages d'aluminium - Anodisation - Partie 2: Détermination de la masse par unité de surface (masse surfacique) des couches anodiques - Méthode gravimétrique
La présente partie de cette norme européenne spécifie une méthode gravimétrique de détermination de la masse par unité de surface (masse surfacique) des couches anodiques sur l'aluminium et ses alliages. Cette méthode est applicable à toutes les couches d'oxyde obtenues par anodisation sur l'aluminium et ses alliages, aussi bien sur pièces moulées que sur produits corroyés. Cette méthode est valable pour la plupart des alliages d'aluminium, à l'exception de ceux dont la teneur en cuivre est supérieure à 6 %.
Aluminij in aluminijeve zlitine - Anodna oksidacija - 2. del: Ugotavljanje mase na enoto površine (površinska gostota) anodnooksidiranih prevlek - Gravimetrijska metoda
General Information
- Status
- Withdrawn
- Publication Date
- 17-Nov-1998
- Withdrawal Date
- 28-Feb-2011
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 15 - Aluminium anodisation
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Mar-2011
- Completion Date
- 01-Mar-2011
Relations
- Effective Date
- 22-Dec-2008
- Referred By
EN 12952-15:2003 - Water-tube boilers and auxiliary installations - Part 15: Acceptance tests - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN 15250:2007 - Slow heat release appliances fired by solid fuel - Requirements and test methods - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 12373-2:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method". This standard covers: This part of this European Standard specifies a gravimetric method for determining the mass per unit area (surface density) of anodic oxidation coatings on aluminium and its alloys. The method is applicable to all oxide coatings formed by anodizing aluminium and its alloys, either cast or wrought, and is suitable for most aluminium alloys except those in which the copper content is greater than 6 %.
This part of this European Standard specifies a gravimetric method for determining the mass per unit area (surface density) of anodic oxidation coatings on aluminium and its alloys. The method is applicable to all oxide coatings formed by anodizing aluminium and its alloys, either cast or wrought, and is suitable for most aluminium alloys except those in which the copper content is greater than 6 %.
EN 12373-2:1998 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment; 77.120.10 - Aluminium and aluminium alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12373-2:1998 has the following relationships with other standards: It is inter standard links to EN ISO 2106:2011, EN 12952-15:2003, EN 12953-11:2003, EN 12809:2001, EN 15250:2007, EN 13229:2001, EN 12815:2001, EN 13240:2001, EN 14785:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12373-2:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine - Anodna oksidacija - 2. del: Ugotavljanje mase na enoto površine (površinska gostota) anodnooksidiranih prevlek - Gravimetrijska metodaAluminium und Aluminiumlegierungen - Anodisieren - Teil 2: Bestimmung der Masse je Flächeneinheit (flächenbezogene Masse) von anodisch erzeugten Oxidschichten - Gravimetrisches VerfahrenAluminium et alliages d'aluminium - Anodisation - Partie 2: Détermination de la masse par unité de surface (masse surfacique) des couches anodiques - Méthode gravim
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...