65.160 - Tobacco, tobacco products and related equipment
ICS 65.160 Details
Tobacco, tobacco products and related equipment
Tabak, Tabakerzeugnisse und Ausrustung fur die Tabakindustrie
Tabac, produits du tabac et équipements connexes
Tobak, tobačni izdelki in oprema
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 65.160 - Tobacco, tobacco products and related equipment
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document: — defines the parameters and specifies the standard conditions for the routine analytical generation and collection of aerosol from electrically heated tobacco products (eHTPs); — specifies technical requirements for the routine analytical puffing machine for eHTP generation and collection of aerosol, termed as “machine” in this document, conforming with the standard conditions stated within Clause 4. This document does not specify aerosol trapping nor subsequent sample preparation and analytical method of components in the trapped aerosol or the gas phase. This document is also applicable to products other than those defined in 3.15 if a specific method references this document.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
This document: — defines the parameters and specifies the standard conditions for the routine analytical generation and collection of aerosol from aerosol heated tobacco products (aHTP); — specifies technical requirements for the routine analytical puffing machine for aHTP generation and collection of aerosol, termed as “machine” in this document, conforming with the standard conditions stated within Clause 4; This document does not specify aerosol trapping nor subsequent sample preparation and analytical method of components in the trapped aerosol or the gas phase. This document is also applicable to products other than those defined in 3.15 if a specific method references this document.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
This document: — defines standardized terminology and definitions for the heated tobacco product (HTP) category; — defines the heated tobacco product (HTP) sub-categories and the attributes of each; — does not include waterpipe or loose-leaf tobacco products. This document does not specify the means for aerosol trapping, subsequent sample preparation or analyses of components in the trapped aerosol. The HTP category clearly excludes products such as conventional combustible cigarettes, cigars, roll-your own tobacco products, pipe tobacco products, e‑vapor products (also called electronic cigarettes or e‑cigarettes), moist smokeless tobacco, oral tobacco products, and oral tobacco derived nicotine (OTDN) products. This document describes the terms and definitions that apply to tobacco heating systems. Any product that falls under those terms and definitions can be tested applying testing standards that are specifically addressing tobacco heating systems. This document aids in choosing the right standard for tobacco heating systems testing.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
This document: — defines the parameters and specifies the standard conditions for the routine analytical generation and collection of aerosol from carbon heated tobacco products (cHTP); — specifies technical requirements for the routine analytical puffing machine for cHTP generation and collection of aerosol, termed as “machine” in this document, conforming with the standard conditions stated within Clause 4; This document does not specify aerosol trapping nor subsequent sample preparation and analytical method of components in the trapped aerosol or the gas phase. This document is also applicable to products other than defined in 3.14 if a specific method references this document.
- Standard10 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document specifies a method for the determination of the filling power of the tobacco used for fine-cut tobacco smoking articles.
- Standard6 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
This document specifies a method for the determination of carbon monoxide (CO) in the vapour phase of mainstream cigarette smoke collected with the smoking regime specified in ISO 4387.
- Standard7 pagesEnglish languagesale 15% off
This document defines terms, symbols and units of measurement related to electronic cigarettes and e-liquids in order to harmonize the terminology.
- Technical report9 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines terms, symbols and units of measurement related to electronic cigarettes and e-liquids in order to harmonize the terminology.
- Technical report9 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies an ion chromatographic method for the determination of the acetate and citrate content of materials used to produce wrappings for cigarette filters, cigarettes, and other tobacco products.
- Standard8 pagesEnglish languagesale 15% off
This document specifies the method for the determination of nicotine delivery consistency of a single
electronic cigarette [1].
This document:
defines the equipment to be used;
specifies the preparation of the e-cigarette samples for testing;
specifies the aerosol collection process;
specifies the analytical method;
specifies the determination of the test result.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the method for the determination of nicotine delivery consistency from several e-cigarette of identical type.
Suitable sampling procedures are described for obtaining results from within a single production batch, as well as for sampling across batches. Sampling within a single batch is likely to be required when obtaining data for regulatory submission. Sampling across commercially produced batches will improve the understanding about consistency.
This document:
defines the equipment to be used;
specifies the preparation of the e-cigarette samples for testing;
specifies the aerosol collection process;
specifies the analytical method..
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the method for the determination of nicotine delivery consistency of an electronic cigarette over the duration of use of e-liquid in the reservoir or a battery charge.
This document:
- defines the equipment to be used;
- specifies the preparation of the e-cigarette samples for testing;
- specifies the aerosol generation process;
- specifies the analytical method;
- specifies the determination of the test result.
This document does not seek to demonstrate whether there is consistency of nicotine delivery between e-cigarettes. The latter is the aim of a separate method under development, EN 17634 Electronic cigarettes and e-liquids - Determination of nicotine delivery consistency over defined puff sequences of a number of e-cigarettes of identical type [1]. Two separate methods have been developed to determine consistency of nicotine delivery, pending regulatory clarity on the Tobacco Products Directive's requirement to "deliver nicotine doses at consistent levels" [2].
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of nicotine delivery consistency between e-cigarettes (devices, consumables and combinations).
This document:
- defines the equipment to be used;
- specifies the preparation of the samples for testing;
- specifies the aerosol collection process;
- specifies the analytical method.
Suitable sampling procedures are described for obtaining results from within a single production batch, as well as for sampling across batches.
The method in this document does not seek to demonstrate whether there is consistency between puffs generated at the start or nearer the end of a tank fill or battery charge. The latter is the aim of a separate method under development, EN 17746 Electronic cigarettes and e-liquids — Determination of nicotine delivery consistency over defined puff sequences within a single e-cigarette [1]. Two separate methods have been developed to determine consistency of nicotine delivery, pending regulatory clarity on the Tobacco Products Directive's requirement to "deliver nicotine doses at consistent levels" [2].
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the atmosphere for the conditioning and testing of samples of tobacco and tobacco products.
It is primarily applicable to cigarettes; however, if not specified differently in other ISO standards, it can also be applied to tobacco, other tobacco products, and materials used in the manufacture of tobacco products for which prior conditioning is necessary. Standards for the conditioning and testing of other forms of tobacco, tobacco products, and materials can refer to all or part of this document.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document specifies a method for the determination of benzo[a]pyrene (B[a]P) in the total particulate matter of cigarette mainstream smoke with an intense smoking regime using gas chromatography/mass spectrometry (GC/MS) with cyclohexane as extraction solvent. This method is specified using ISO 20778 smoking parameters. An alternative method for the determination of B[a]P is specified in ISO 23906‑1, with a different clean-up using methanol solvent.
- Standard9 pagesEnglish languagesale 15% off
This document establishes the general principles for manufacturing, filling and holding e-liquids for prefilled containers or products.
FprCEN/TS 17633 and FprEN 17648 are intended to be used in conjunction with this document.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies an analytical method to quantify nicotine of collected vapour product emissions by gas chromatography.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the atmosphere for the conditioning and testing of samples of tobacco and tobacco products. It is primarily applicable to cigarettes; however, if not specified differently in other ISO standards, it can also be applied to tobacco, other tobacco products, and materials used in the manufacture of tobacco products for which prior conditioning is necessary. Standards for the conditioning and testing of other forms of tobacco, tobacco products, and materials can refer to all or part of this document.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document specifies a method for the determination of measuring mass loss from e-vapor
products.
It defines the parameters and specifies the standard conditions for measuring the loss of mass of a
vapor product (difference between the mass of the filled vapor product before and after a number of
puffs).
It does not specify the vapor product, the vapor product parameters or e-liquid to be used.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods for the determination of total particulate matter and preparation for the subsequent determination of nicotine-free dry particulate matter present in the smoke from articles made from fine-cut tobacco and expanded tobacco, generated and collected using a routine analytical smoking machine. It specifies the method of making of fine-cut tobacco smoking articles using a tube made from a specified wrapper.
- Standard19 pagesEnglish languagesale 15% off
- Standard20 pagesFrench languagesale 15% off
This document specifies a method of measurement of the masses of e-liquid vaporised and the aerosol collected from vapour product(s).
It does not specify the vapour product(s), the vapour product(s) operational settings or, e-liquid to be used.
NOTE Application of this document can be required as a preliminary step for subsequent analyses.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method of measurement of the masses of e-liquid vaporised and the aerosol collected from vapour product(s). It does not specify the vapour product(s), the vapour product(s) operational settings or, e-liquid to be used. NOTE Application of this document can be required as a preliminary step for subsequent analyses.
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document specifies a test method for testing the capability of a cigarette, positioned on one of three standard substrates, to extinguish or to generate sufficient heat to continue burning, and thus potentially cause ignition of bedding or upholstered furniture. This document is only applicable to factory-made cigarettes that burn along the length of a tobacco column.
This is a performance-based document; it does not prescribe any design features of the cigarette that can lead to improved or degraded performance in the test method. The output of this method has been correlated with the potential for cigarettes to ignite upholstered furniture.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of selected carbonyl compounds in e-vapor product emissions.
Selected carbonyl compounds are:
• Acetaldehyde
• Formaldehyde
• Acrolein (potentially)
• Crotonaldehyde (potentially)
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the quality testing of e-liquids for vaping products in their fully produced form (“finished e-liquid”), whether containing nicotine or not. It is also applicable to testing of e-liquids when extracted from prefilled cartridges and similar e-liquid presentations to consumers.
This document is intended to be read in conjunction with CEN documents WI 00437001, General principles for manufacturing, filling and holding e-liquids for prefilled containers or products, and WI 00437023, E-liquid Ingredients.
NOTE Testing for undesirable constituents is outside the scope of this document because their presence in final e-liquid is limited by controls at the ingredient level. The maximum level of undesirable constituents is set in the ingredient specification and monitored by testing at a frequency determined appropriate by the manufacturer.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the amount of selected carbonyl compounds (formaldehyde and acetaldehyde) as their 2,4-dinitrophenylhydrazones in vapour product emissions using reversed phase liquid chromatography coupled with ultraviolet or diode array detector (LC-UV or LC-DAD).
This document does not include the analysis of other carbonyl compounds, such as acrolein and crotonaldehyde, due to previous work indicated issues associated with stability of these compounds in the e-liquid solutions that were used to evaluate method performance[4].
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the manufacturing quality testing of e-liquids for vaping products in their fully produced form "finished e-liquid" at the point of manufacture, whether containing nicotine or not.
This document is intended to be read in conjunction with FprEN 17647 and FprEN 17648.
NOTE Testing for undesirable constituents is outside the scope of this document because their presence in final e-liquid is limited by controls at the ingredient level. The maximum level of undesirable constituents is set in the ingredient specification and monitored by testing at a frequency determined appropriate by the manufacturer.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the amount of selected carbonyl compounds (formaldehyde and acetaldehyde) as their 2,4-dinitrophenylhydrazones in vapour product emissions using reversed phase liquid chromatography coupled with ultraviolet or diode array detector (LC-UV or LC-DAD). This document does not include the analysis of other carbonyl compounds, such as acrolein and crotonaldehyde, due to previous work indicated issues associated with stability of these compounds in the e-liquid solutions that were used to evaluate method performance[4].
- Standard16 pagesEnglish languagesale 15% off
- Standard17 pagesFrench languagesale 15% off
The document is applicable to e-liquids, as well as flavour concentrates supplied directly to the consumer for use in e-liquids, intended for the production of aerosol for consumption by inhalation in electronic cigarettes and similar vapour producing devices. It is applicable to eliquids and concentrates intended for the consumer either with or without nicotine content.
The standard specifies the minimum safety and technical requirements for the selection and control of ingredients for e-liquids and flavour concentrates, as well as some ingredient-related risk assessment and product information requirements for the finished e-liquid/flavour concentrate, when the products are to be used in electronic cigarette devices operated and maintained in the manner prescribed by the manufacturer.
The document is not applicable to packaging, device or refill container materials.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
Applicable to the manufacture, and use in manufacture, of liquids for use in electronic cigarettes and similar vapour producing devices intended for the production of aerosol for consumption by inhalation. Applicable to liquids with or without nicotine content. The standard will specify the minimum safety and quality requirements for the manufacture of such liquids and for their filling and holding when used in the manufacture of prefilled electronic cigarette devices.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies an analytical method to quantify nicotine of collected vapour product
emissions by gas chromatography.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document describes requirements related to ingredients used in e-liquids and e-liquid components.
This document:
- specifies ingredient purity and related supply chain requirements;
- specifies ingredient exclusion criteria based on function and toxicological properties;
- specifies the need for a toxicological risk assessment and provides guidance on the content of this as well as specifying competency requirements for those responsible for it;
- specifies nicotine content versus label claim over shelf life and performance characteristics of the analytical method used to measure the nicotine;
- specifies pH limits for the e-liquid;
- provides guidance on the measuring of emissions;
- specifies certain ingredient-related product labelling;
- provides guidance on ingredients that should not be used in e-liquids;
- provides guidance on maximum levels in finished e-liquid for certain undesirable constituents that may occur in natural extracts used as flavourings.
This document does not apply to packaging, vaping devices or refill container materials/ingredients.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies an analytical method to quantify nicotine of collected vapour product emissions by gas chromatography.
- Standard9 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
This document:
— defines the parameters and specifies the standard conditions for a vaping machine for vapour products (as defined in 3.1);
— specifies technical requirements for the machine for routine analytical vaping, conforming with the standard conditions stated within Clause 4;
— does not specify the vapour product, the vapour product operation or the liquid to be used;
— does not specify the means for aerosol trapping, subsequent sample preparation or analyses of components in the trapped aerosol.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies an analytical method to quantify the nicotine, propylene glycol and glycerol content in e-liquids by gas chromatography.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for testing the capability of a cigarette, positioned on one of
three standard substrates, to extinguish or to generate sufficient heat to continue burning, and thus
potentially cause ignition of bedding or upholstered furniture. This document is only applicable to
factory-made cigarettes that burn along the length of a tobacco column.
This is a performance-based document; it does not prescribe any design features of the cigarette that
can lead to improved or degraded performance in the test method. The output of this method has been
correlated with the potential for cigarettes to ignite upholstered furniture.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for testing the capability of a cigarette, positioned on one of three standard substrates, to extinguish or to generate sufficient heat to continue burning, and thus potentially cause ignition of bedding or upholstered furniture. This document is only applicable to factory-made cigarettes that burn along the length of a tobacco column. This is a performance-based document; it does not prescribe any design features of the cigarette that can lead to improved or degraded performance in the test method. The output of this method has been correlated with the potential for cigarettes to ignite upholstered furniture.
- Standard23 pagesEnglish languagesale 15% off
- Standard24 pagesFrench languagesale 15% off
This document:
— defines the parameters and specifies the standard conditions for a vaping machine for vapour products (as defined in 3.1);
— specifies technical requirements for the machine for routine analytical vaping, conforming with the standard conditions stated within Clause 4;
— does not specify the vapour product, the vapour product operation or the liquid to be used;
— does not specify the means for aerosol trapping, subsequent sample preparation or analyses of components in the trapped aerosol.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies an analytical method to quantify the nicotine, propylene glycol and glycerol content in e-liquids by gas chromatography.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the gas-chromatographic determination of nicotine in total particulate matter from the mainstream smoke. The smoking of cigarettes and the collection of mainstream smoke are carried out according to ISOÂ 4387.
NOTEÂ Â Â Â Â Â ISOÂ 20778 and ISOÂ 22253 provide the determination method of nicotine in smoke with an intense smoking regime.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
This document specifies a method for the determination of water content by the Karl Fischer method. It is applicable to raw tobacco as well as tobacco taken from finished products. The method is suitable for water contents ranging from a mass fraction of at least 2Â % to 55Â %.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesEnglish languagesale 15% off
This document recollects and evaluates physical parameters of filter paper substrates for the determination of ignition propensity of cigarettes according to ISO 12863.
- Technical report18 pagesEnglish languagesale 15% off
- Technical report18 pagesEnglish languagesale 15% off
- Technical report18 pagesFrench languagesale 15% off
- Technical report18 pagesFrench languagesale 15% off
- Technical report18 pagesFrench languagesale 15% off
This document specifies a gas-chromatographic (GC) method for the determination of water content. It is applicable to raw tobacco as well as tobacco taken from finished products. The method is suitable for water contents ranging at least from a mass fraction of 2 % to 55 %.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
This document describes the requirements for a monitor test piece for smoking machine as well as its use.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
This document specifies a method for the determination of water content by the Karl Fischer method. It is applicable to raw tobacco as well as tobacco taken from finished products. The method is suitable for water contents ranging from a mass fraction of at least 2 % to 55 %.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesEnglish languagesale 15% off
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
This document specifies a method for the gas-chromatographic determination of nicotine in total particulate matter from the mainstream smoke. The smoking of cigarettes and the collection of mainstream smoke are carried out according to ISO 4387. NOTE ISO 20778 and ISO 22253 provide the determination method of nicotine in smoke with an intense smoking regime.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
This document specifies a method for the quantification of four tobacco specific nitrosamines (TSNAs) in the total particulate matter of mainstream cigarette smoke by using reversed phase high performance liquid chromatography with tandem mass spectrometry (LC-MS/MS). The quantified TSNAs are: N-nitrosonornicotine (NNN), N-nitrosoanatabine (NAT), N-nitrosoanabasine (NAB) and 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK).
- Standard14 pagesEnglish languagesale 15% off
- Standard14 pagesEnglish languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
This document specifies a method for the quantification of four tobacco specific nitrosamines (TSNAs) in tobacco and the following tobacco products: cigarettes, cigars and smokeless tobacco products using reversed phase high performance liquid chromatography with tandem mass spectrometry (LC-MS/MS). The TSNAs determined with this method are: N-nitrosonornicotine (NNN), N-nitrosoanatabine (NAT), N-nitrosoanabasine (NAB) and 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK).
- Standard16 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish languagesale 15% off
- Standard16 pagesFrench languagesale 15% off
- Standard16 pagesFrench languagesale 15% off
This document specifies reference e-liquids to be used to test emissions generated by electronic cigarettes [1].
This document applies to the reference e-liquids to be used when an electronic cigarette is sold empty, without an e-liquid, and where the product information or instructions for use are not specific in terms of the compositional characteristics of the e-liquid to be used with the device.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day