EN ISO 4619:2018

SLOVENSKI STANDARD
01-marec-2019
1DGRPHãþD
SIST EN ISO 4619:2012
SIST ISO 4619:1998
Sušilniki za barve in lake (ISO 4619:2018)
Driers for paints and varnishes (ISO 4619:2018)
Trockenstoffe für Beschichtungsstoffe (ISO 4619:2018)
Siccatifs pour peintures et vernis (ISO 4619:2018)
Ta slovenski standard je istoveten z: EN ISO 4619:2018
ICS:
87.100 Oprema za nanašanje Paint coating equipment
premazov
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 4619
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2018
EUROPÄISCHE NORM
ICS 87.060.99 Supersedes EN ISO 4619:2010
English Version
Driers for paints and varnishes (ISO 4619:2018)
Siccatifs pour peintures et vernis (ISO 4619:2018) Trockenstoffe für Beschichtungsstoffe (ISO 4619:2018)
This European Standard was approved by CEN on 4 November 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4619:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 4619:2018) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4619:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4619:2018 has been approved by CEN as EN ISO 4619:2018 without any modification.

INTERNATIONAL ISO
STANDARD 4619
Third edition
2018-11
Driers for paints and varnishes
Siccatifs pour peintures et vernis
Reference number
ISO 4619:2018(E)
©
ISO 2018
ISO 4619:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 4619:2018(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Descriptions . 2
4.1 Solid driers . 2
4.2 Liquid driers . 2
4.3 Metals used . 2
4.4 Acids used. 2
5 Requirements and test methods . 2
6 Sampling . 3
7 Methods of test for solid driers . 3
7.1 Appearance and consistency. 3
7.2 Colour . 3
7.3 Solubility (miscibility) in solvents, raw linseed oil or other drying media. 4
7.4 Stability of solution . 4
7.5 Suspended solid matter . 4
7.6 Volatile matter . 5
7.7 Acidity . 5
7.7.1 Principle . 5
7.7.2 Reagents . 5
7.7.3 Apparatus . 5
7.7.4 Preparation of the ion-exchange column . 6
7.7.5 Procedure . 7
7.7.6 Expression of results . 7
8 Methods of test for liquid driers . 7
8.1 Appearance . 7
8.2 Colour . 7
8.3 Solubility (miscibility) in solvents, raw linseed oil or other drying media. 7
8.4 Stability of solution . 8
8.5 Viscosity . 8
9 Methods for determination of metal content of driers containing only one metal .9
9.1 General . 9
9.2 Cobalt [ethylene diaminetetraacetic acid (EDTA) titrimetric method] . 9
9.2.1 Reagents . 9
9.2.2 Procedure .10
9.2.3 Expression of results .10
9.3 Manganese (EDTA titrimetric method) .11
9.3.1 Reagents .11
9.3.2 Procedure .11
9.3.3 Expression of results .11
9.4 Zinc (EDTA titrimetric method) .12
9.4.1 Reagents .12
9.4.2 Procedure .12
9.4.3 Expression of results .12
9.5 Calcium (EDTA titrimetric method) .12
9.5.1 Reagents .12
9.5.2 Procedure .13
9.5.3 Expression of results .13
9.6 Iron (Io
...