EN 13481-1:2012
(Main)Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions
Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions
This European Standard specifies the definitions of the terms used in the EN 13146 series and in the EN 13481 series.
Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 1: Definitionen
Diese Europäische Norm legt die in den Reihen EN 13146 und EN 13481 verwendeten Begriffe fest.
Applications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 1: Définitions
La présente Norme européenne couvre les définitions des termes employés dans les séries de normes EN 13146 et EN 13481.
Železniške naprave - Zgornji ustroj - Zahteve za izdelavo pritrdilnih sistemov - 1. del: Definicije
Ta evropski standard določa definicije izrazov, uporabljenih v skupinah standardov EN 13146 in EN 13481.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Zahteve za izdelavo pritrdilnih sistemov - 1. del: DefinicijeBahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 1: DefinitionenApplications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 1: DéfinitionsRailway applications - Track - Performance requirements for fastening systems - Part 1: Definitions93.100Gradnja železnicConstruction of railways01.040.93Nizke gradnje (Slovarji)Civil engineering (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 13481-1:2012SIST EN 13481-1:2012en,fr,de01-julij-2012SIST EN 13481-1:2012SLOVENSKI
STANDARDSIST EN 13481-1:2004/A1:2007SIST EN 13481-1:20041DGRPHãþD
SIST EN 13481-1:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13481-1
May 2012 ICS 01.040.93; 93.100 Supersedes EN 13481-1:2002English Version
Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions
Applications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 1: Définitions
Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 1: Definitionen This European Standard was approved by CEN on 27 April 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13481-1:2012: ESIST EN 13481-1:2012
EN 13481-1:2012 (E) 2 Contents Page Foreword . 31 Scope. 42 Normative references . 43 Terms and definitions . 4Bibliography . 9 SIST EN 13481-1:2012
EN 13481-1:2012 (E) 3 Foreword This document (EN 13481-1:2012) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn at the latest by November 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13481-1:2002. In this revision of EN 13481-1:2002 the main changes are as follows: a) A range of categories of fastening systems have been included in 3.1; b) the definition of embedded rail (3.12) has been extended; c) definitions of low and high frequency dynamic stiffness have been added (3.25). This European Standard is one of the series EN 13481 "Railway applications – Track – Performance requirements for fastening systems" which consists of the following parts: Part 1: Definitions Part 2: Fastening systems for concrete sleepers Part 3: Fastening systems for wood sleepers Part 4: Fastening systems for steel sleepers Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel Part 7: Special fastening systems for switches and crossings and check rails NOTE Part 6 does no
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.