EN ISO 1043-2:2001

SLOVENSKI STANDARD
01-februar-2002
3ROLPHUQLPDWHULDOL6LPEROLLQNUDWLFHGHO3ROQLODLQPDWHULDOL]DRMDþHQMH,62

Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO
1043-2:2000)
Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 2: Füllstoffe und
Verstärkungsstoffe (ISO 1043-2:2000)
Plastiques - Symboles et abréviations - Partie 2: Charges et matériaux de renforcement
(ISO 1043-2:2000)
Ta slovenski standard je istoveten z: EN ISO 1043-2:2001
ICS:
01.075 Simboli za znake Character symbols
83.040.30 Pomožni materiali in aditivi Auxiliary materials and
za polimerne materiale additives for plastics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 1043-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2001
ICS 59.100.01; 83.040.30; 83.080.01
English version
Plastics - Symbols and abbreviated terms - Part 2: Fillers and
reinforcing materials (ISO 1043-2:2000)
Plastiques - Symboles et abréviations - Partie 2: Charges Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 2:
et matériaux de renforcement (ISO 1043-2:2000) Füllstoffe und Verstärkungsstoffe (ISO 1043-2:2000)
This European Standard was approved by CEN on 17 June 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1043-2:2001 E
worldwide for CEN national Members.

CORRECTED  2002-02-06
Foreword
The text of the International Standard from Technical Committee ISO/TC 61 "Plastics" of the
International Organization for Standardization (ISO) has been taken over as a European
Standard by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by
IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by February 2002, and conflicting national
standards shall be withdrawn at the latest by February 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 1043-2:2000 has been approved by CEN as a
European Standard without any modifications.
INTERNATIONAL ISO
STANDARD 1043-2
Second edition
2000-07-15
Plastics — Symbols and abbreviated
terms —
Part 2:
Fillers and reinforcing materials
Plastiques — Symboles et abréviations —
Partie 2: Charges et matériaux de renforcement
Reference number
ISO 1043-2:2000(E)
ISO 1043-2:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part
...