59.100.01 - Materials for the reinforcement of composites in general

ISO 10122:2014 provides a basis for specifications applicable to tubular braided sleeves used as reinforcements in plastics. It deals with tubular sleeves braided from all types of yarn or roving.

ISO 1043-2:2011 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.

ISO 4602:2010 specifies two methods of determining the number of yarns per unit length of warp and weft of woven textile-reinforcement fabrics made of glass, carbon, aramid or any other (textile-diameter) reinforcement fibre.

This International Standard specifies a method for the determination of the linear density of glass-fibre, carbon-fibre, aramid-fibre and any other reinforcement-fibre yarns. It is applicable to all types of yarn, including single yarns, double and cabled yarns, textured yarns, rovings and staple-fibre yarns.

This International Standard specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres. The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step. This International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a f...view more

ISO 1899:2009 specifies a method for the determination of the linear density of glass-fibre, carbon-fibre, aramid-fibre and any other reinforcement-fibre yarns.
It is applicable to all types of yarn, including single yarns, double and cabled yarns, textured yarns, rovings and staple-fibre yarns.

ISO 1899:2009 specifies a method for the determination of the linear density of glass-fibre, carbon-fibre, aramid-fibre and any other reinforcement-fibre yarns. It is applicable to all types of yarn, including single yarns, double and cabled yarns, textured yarns, rovings and staple-fibre yarns.

ISO 1890:2009 specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres.
The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step.
The International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a fabric, the re...view more

ISO 1890:2009 specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres. The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step. The International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a fabric, the resu...view more

1.1   This Part 1 of EN 13417 establishes a method of designation for woven fabrics which may be used as a basis for specifications of fabrics used for the reinforcement of plastics.
1.2   This designation system applies to fabrics made from para-aramid, carbon, glass, polyethylene, polyester and ceramic fibre in the form of single yarns, plied yarns, cabled yarns, textured yarns, rovings, tows, etc. and which are intended to provide reinforcement in plastic composite materials.
The material used ...view more

1.1   This Part 2 of EN 13417 defines the test methods to be used to determine the designated and specified properties given in Parts 1 & 3 respectively.
1.2   This Part 2 of EN 13417 defines the general requirements applicable to the specification of all types of woven fabrics falling within the scope of this specification as defined in Part 1 of the standard.

1.1   This Part 3 of EN 13417 defines a specification for woven fabrics made from continuous filament reinforcement yarns, tows and rovings, which may be used as the basis for specifications.
The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.
1.2   The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defi...view more

1.1   This Part 2 of EN 13417 defines the test methods to be used to determine the designated and specified properties given in Parts 1 & 3 respectively.
1.2   This Part 2 of EN 13417 defines the general requirements applicable to the specification of all types of woven fabrics falling within the scope of this specification as defined in Part 1 of the standard.

1.1   This Part 3 of EN 13417 defines a specification for woven fabrics made from continuous filament reinforcement yarns, tows and rovings, which may be used as the basis for specifications.
The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.
1.2   The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defi...view more

1.1   This Part 1 of EN 13417 establishes a method of designation for woven fabrics which may be used as a basis for specifications of fabrics used for the reinforcement of plastics.
1.2   This designation system applies to fabrics made from para-aramid, carbon, glass, polyethylene, polyester and ceramic fibre in the form of single yarns, plied yarns, cabled yarns, textured yarns, rovings, tows, etc. and which are intended to provide reinforcement in plastic composite materials.
The material used ...view more

This European Standard specifies a method for the determination of the moisture content of reinfrocements products, such as continuous filament yarn, staple fibre yarn, rovings, chopped strands, mats, fabrics and other forms of reinforcements made form textile glass, carbon or aramid fibres.

Provides a basis for a specification applicable to fabrics woven from yarn made from textile glass, carbon or aramid and generally used for plastics reinforcements. Replaces the first edition.

Applies to tapes braided from all types of yarn or roving used as reinforcements in plastics. Deals with designation, characteristics to be specified, defects, sampling and selection of test pieces, test methods, packaging and ordering.