83.040.30 - Auxiliary materials and additives for plastics

This part of ISO 1043 provides uniform symbols for components of terms relating to plasticizers to
form abbreviated terms. It includes, in general, only those abbreviated terms that have come into
established use.
The purpose of this part of ISO 1043 is to prevent the occurrence of more than one abbreviated term
for a given plasticizer. The symbols are primarily intended to be convenient shorthand for forming
abbreviated terms for chemical names in publications and other written matter.

ISO 1043-3:2016 provides uniform symbols for components of terms relating to plasticizers to form abbreviated terms. It includes, in general, only those abbreviated terms that have come into established use.
The purpose of ISO 1043-3:2016 is to prevent the occurrence of more than one abbreviated term for a given plasticizer. The symbols are primarily intended to be convenient shorthand for forming abbreviated terms for chemical names in publications and other written matter.

ISO 1043-3:2016 provides uniform symbols for components of terms relating to plasticizers to form abbreviated terms. It includes, in general, only those abbreviated terms that have come into established use. The purpose of ISO 1043-3:2016 is to prevent the occurrence of more than one abbreviated term for a given plasticizer. The symbols are primarily intended to be convenient shorthand for forming abbreviated terms for chemical names in publications and other written matter.

This part of ISO 1043 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.

ISO 1043-2:2011 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.

ISO 1043-2:2011 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.

This part of ISO 4597 specifies a method of designation for epoxy resin hardeners and accelerators. The object of this designation method is to allocate to each commercial product a group of digits, called the "designation", giving in a coded form certain information on the product: chemical base, modifiers and solvents, viscosity and additives. Thus all products having similar properties and therefore likely to have the same uses will have the same designation, so aiding users in their choice i...view more

ISO 4597-1:2005 specifies a method of designation for epoxy resin hardeners and accelerators.
The object of the designation method is to allocate to each commercial product a group of digits, called the 'designation', giving in a coded form certain information on the product: chemical base, modifiers and solvents, viscosity and additives.
Thus all products having similar properties and therefore likely to have the same uses will have the same designation, so aiding users in their choice if pro...view more

This Part of EN 14469  specifies a procedure for determining the relative tinting strength of white pigments in plasticized polyvinyl chloride (PVC-P) at identical concentration of the white pigments by weight. To this end, the white pigments are incorporated into the basic mixture A (see EN 14469 -1) together with a carbon black pigment preparation.

This Part of EN 14469  specifies a procedure for preparing test samples for the testing of colouring materials )  in plasticized polyvinyl chloride (PVC-P) materials. It describes the manner in which basic mixtures as defined in EN 14469 -1 and pigments and pigment preparations are to be used to prepare test samples for the testing of particular pigment properties. The standard is applicable to inorganic and organic pigments, and also to pigment preparations in powder, paste or granular form (se...view more

This Part of EN 14469 specifies a procedure for producing basic mixtures for the testing of colouring materials )  in plasticized polyvinyl chloride (PVC-P) materials, together with the composition of these basic mixtures.
It distinguishes between:
   - basic mixture A (transparent basic mixture)
   - basic mixture B (white basic mixture)

This Part of EN 14469 specifies a method of establishing and evaluating quantitatively the bleeding of pigments from sheets of coloured PVC-P into material of the same kind brought into contact with them. It also sets out the way in which specimens prepared in accordance with prEN 14469-2 shall be tested. It may also be used for determine bleeding from other polymers into white PVC-P.
This Part of EN 14469 does not deal with pigment blooming (see also Annex A, informative).

This Part of EN 14469 specifies a procedure for producing basic mixtures for the testing of colouring materials )  in plasticized polyvinyl chloride (PVC-P) materials, together with the composition of these basic mixtures.
It distinguishes between:
   - basic mixture A (transparent basic mixture)
   - basic mixture B (white basic mixture)

This Part of EN 14469 specifies a method of establishing and evaluating quantitatively the bleeding of pigments from sheets of coloured PVC-P into material of the same kind brought into contact with them. It also sets out the way in which specimens prepared in accordance with prEN 14469-2 shall be tested. It may also be used for determine bleeding from other polymers into white PVC-P.
This Part of EN 14469 does not deal with pigment blooming (see also Annex A, informative).

This Part of EN 14469  specifies a procedure for preparing test samples for the testing of colouring materials )  in plasticized polyvinyl chloride (PVC-P) materials. It describes the manner in which basic mixtures as defined in EN 14469 -1 and pigments and pigment preparations are to be used to prepare test samples for the testing of particular pigment properties. The standard is applicable to inorganic and organic pigments, and also to pigment preparations in powder, paste or granular form (se...view more

This Part of EN 14469  specifies a procedure for determining the relative tinting strength of white pigments in plasticized polyvinyl chloride (PVC-P) at identical concentration of the white pigments by weight. To this end, the white pigments are incorporated into the basic mixture A (see EN 14469 -1) together with a carbon black pigment preparation.

This Technical Specification specifies a test method to determine the mass fraction of a polymeric additive that falls below a MW of 1000.  The method is applicable to polymeric additives per se - i.e. supplied in their usable form, before formulation into a plastic.  The method is also applicable to polymeric additives extracted from finished plastic materials and articles, provided that precautions are taken to ensure the absence of any interference from any other co-extractives derived from t...view more