EN 14469-1:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PHãDQLFPigmente und Füllstoffe - Prüfung von Farbmitteln in weichmacherhaltigem Polyvinylchlorid (PVC-P) - Teil 1: Zusammensetzung und Herstellen der GrundmischungenPigments et matieres de charge - Essai des matieres colorantes dans le chlorure de polyvinyle plastifié (PVC-P) - Partie 1: Composition et préparation des mélanges de basePigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures83.040.30Pomožni materiali in aditivi za polimerne materialeAuxiliary materials and additives for plasticsICS:Ta slovenski standard je istoveten z:EN 14469-1:2004SIST EN 14469-1:2004en01-september-2004SIST EN 14469-1:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14469-1May 2004ICS 83.040.30English versionPigments and extenders - Testing of colouring materials inplasticized polyvinyl chloride (PVC-P) - Part 1: Composition andpreparation of basic mixturesPigments et matières de charge - Essai des matièrescolorantes dans le chlorure de polyvinyle plastifié (PVC-P) -Partie 1: Composition et préparation des mélanges de basePigmente und Füllstoffe - Prüfung von Farbmitteln inweichmacherhaltigem Polyvinylchlorid (PVC-P) - Teil 1:Zusammensetzung und Herstellen der GrundmischungenThis European Standard was approved by CEN on 9 February 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14469-1:2004: ESIST EN 14469-1:2004

inplasticized polyvinyl chloride (PVC-P) materials, together with the composition of these basic mixtures.It distinguishes between:- basic mixture A (transparent basic mixture)- basic mixture B (white basic mixture)2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 14469-2, Pigments and extenders — Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) —Part 2: Preparation of test specimens.EN ISO 489, Plastics — Determination of refractive index (ISO 489:1999).EN ISO 591-1, Titanium dioxide pigments for paints — Part 1: Specifications and methods of test (ISO 591-1:2000).EN ISO 1060-1, Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation system andbasis for specifications (ISO 1060-1:1998).EN ISO 1628-2, Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers— Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998).EN ISO 2114, Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid valueand total acid value (ISO 2114:2000).EN ISO 12185, Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method(ISO 12185:1996).ISO 6271, Clear liquids — Estimation of colour by the platinum-cobalt scale.3 Constituents of
...