EN ISO 19225:2017
(Main)Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
ISO 19225:2017 specifies safety requirements to minimize the hazards listed in Clause 4 that can occur during the assembly, use, maintenance, repair, decommissioning, disassembly and disposal of shearer loaders and plough systems when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, in underground mining.
ISO 19225:2017 does not cover any hazards resulting from explosive atmospheres. Requirements for explosive atmospheres can be found in ISO/IEC 80079‑38.
ISO 19225:2017 is not applicable to machines that are manufactured before the date of its publication.
Bergbaumaschinen unter Tage - Mobile Abbaumaschinen im Streb - Sicherheitsanforderungen für Walzenlader und Hobelanlagen (ISO 19225:2017)
1.1 Diese Internationale Norm legt Sicherheitsanforderungen fest, die zu erfüllen sind, um die in Abschnitt 4 aufgeführten Gefährdungen zu minimieren, die bei Aufbau, Einsatz, Instandhaltung, Reparatur, Außerbetriebnahme, Demontage und Entsorgung von Walzenladern und Hobelanlagen im untertägigen Bergbau beim vom Hersteller vorgesehenen bestimmungsgemäßen Betrieb auftreten können.
Die Maschinen arbeiten mit Werkzeugen zum Lösen von Mineralien, wie beispielsweise Kohle, Erz, Salz und Nebengestein, in fest eingestellter oder variabler Höhe und sind am Kettenkratzerförderer oder seinen Anbauten zwangsgeführt. Walzenlader haben eingebaute Vorschubsysteme. Sie können von einem oder mehreren Fahrern direkt bedient, ferngesteuert oder programmgesteuert werden. Hobelanlagen werden ferngesteuert. Drahtlose Fernsteuerungseinrichtungen von Walzenladern werden in unmittelbarer Umgebung der Maschinen benutzt.
1.2 Diese Internationale Norm behandelt keine Gefährdungen, die durch explosionsfähige Atmosphären entstehen.
ANMERKUNG Für explosionsfähige Atmosphären siehe ISO/IEC 80079-38.
1.3 Dieses Dokument gilt nicht für Maschinen, die vor dem Datum der Veröffentlichung dieser Internationalen Norm durch ISO hergestellt wurden.
Machines d'exploitation de mines et carrières souterraines - Machines mobiles d'abattage de front de taille - Exigences de sécurité imposées aux haveuses à tambour(s) et aux rabots (ISO 19225:2017)
ISO 19225:2017 spécifie les exigences de sécurité visant à réduire le plus possible les phénomènes dangereux énumérés à l'Article 4 qui peuvent se produire en exploitation minière souterraine pendant le montage, l'utilisation, la maintenance, les réparations, la mise hors service, le démontage et la mise au rebut des haveuses à tambour(s) et des rabots quand ils sont utilisés comme prévu et dans des conditions d'utilisation abusive raisonnablement prévisibles par le constructeur.
ISO 19225:2017 ne couvre pas les phénomènes dangereux résultant des atmosphères explosives. L'ISO/IEC 80079‑38 fournit des exigences pour les atmosphères explosives.
ISO 19225:2017 ne s'applique pas aux machines construites avant sa date de publication.
Stroji za podzemne rudnike - Premični rudarski stroji na odkopu - Varnostne zahteve za valjčne nakladalne stroje in sisteme s plugom (ISO 19225:2017)
Ta evropski standard določa varnostne zahteve, ki jih je treba upoštevati, da se zmanjšajo tveganja, navedena v točki 4, do katerih lahko pride med sestavljanjem, uporabo, vzdrževanjem, popravilom, izločitvijo iz uporabe, razstavljanjem in odstranjevanjem valjčnih nakladalnih strojev in sistemov s plugom, ko se uporabljajo skladno z zahtevami proizvajalca v podzemnih rudnikih. Stroji delujejo z orodji za rezanje mineralov, kot so premog, ruda, sol in okoliške kamnine, na stalni ali spremenljivi višini in se pomikajo na ojačanih odklopnih transporterjih ali svojih priključkih. Valjčni nakladalni stroji imajo vgrajene vlečne sisteme. Lahko jih neposredno upravlja eden ali več voznikov, lahko pa se upravljajo daljinsko oziroma programsko. Sistemi s plugom se upravljajo daljinsko. Brezžični sistemi daljinskega vodenja valjčnih nakladalnih strojev se uporabljajo v neposredni bližini strojev. Ta evropski standard ne zajema tveganj zaradi električne opreme, povezane s strojem. Ne zajema zahtev glede tveganj, povezanih z jamskim eksplozivnim plinom. OPOMBA: Za eksplozivne atmosfere glej standard ISO/IEC 80079-38. Ne zajema odklopnih transporterjev, prekucnih plošč in pomožnih naprav, kot so laserji itd.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2018
1DGRPHãþD
SIST EN 1552:2004
6WURML]DSRG]HPQHUXGQLNH3UHPLþQLUXGDUVNLVWURMLQDRGNRSX9DUQRVWQH
]DKWHYH]DYDOMþQHQDNODGDOQHVWURMHLQVLVWHPHVSOXJRP ,62
Underground mining machines - Mobile extracting machines at the face - Safety
requirements for shearer loaders and plough systems (ISO 19225:2017)
Bergbaumaschinen unter Tage - Mobile Abbaumaschinen im Streb -
Sicherheitsanforderungen für Walzenlader und Hobelanlagen (ISO 19225:2017)
Machines d'exploitation de mines et carrières souterraines - Machines mobiles
d'abattage de front de taille - Exigences de sécurité imposées aux haveuses à tambour
(s) et aux rabots (ISO 19225:2017)
Ta slovenski standard je istoveten z: EN ISO 19225:2017
ICS:
73.100.30 Oprema za vrtanje in Equipment for drilling and
izkopavanje mine excavation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 19225
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2017
EUROPÄISCHE NORM
ICS 73.100.30 Supersedes EN 1552:2003
English Version
Underground mining machines - Mobile extracting
machines at the face - Safety requirements for shearer
loaders and plough systems (ISO 19225:2017)
Machines d'exploitation de mines et carrières Bergbaumaschinen unter Tage - Mobile
souterraines - Machines mobiles d'abattage de front de Abbaumaschinen im Streb - Sicherheitsanforderungen
taille - Exigences de sécurité imposées aux haveuses à für Walzenlader und Hobelanlagen (ISO 19225:2017)
tambour(s) et aux rabots (ISO 19225:2017)
This European Standard was approved by CEN on 16 November 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19225:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4
European foreword
The text of ISO 19225:2017 has been prepared by Technical Committee ISO/TC 82 “Mining” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 19225:2017 by
Technical Committee CEN/TC 196 “Mining machinery and equipment - Safety” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018, and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1552:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19225:2017 has been approved by CEN as EN ISO 19225:2017 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request „M/396
Mandate to CEN and CENELEC for Standardisation in the field of machinery“ to provide one voluntary
means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament
and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast).
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I of Directive
2006/42/EC
Essential Requirements of Clause(s)/sub-clause(s) of Remarks/Notes
EU Directive 2006/42/EC this European Standard
Within the limits of the All normative clauses except For relation of normative clauses
scope all relevant essential clause 5.7 and annex A. (except clause 5.7 and annex A) of
requirements with the this standard to significant
exception of essential hazards/relevant essential
requirements 1.5.8 and requirements of 2006/42/EC see
1.7.4.2 j and u are covered clause 4 „List of significant
hazards“ of this standard in
combination with annex D
“Examples of significant hazards,
hazardous situations, hazardous
events and their relation to the
Essential Requirements of the
Machinery Directive 2006/42/EC”
of CEN Guide 414
(https://boss.cen.eu/ref/CEN_414
.pdf).
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
INTERNATIONAL ISO
STANDARD 19225
First edition
2017-05
Underground mining machines —
Mobile extracting machines at the face
— Safety requirements for shearer
loaders and plough systems
Machines d’exploitation de mines et carrières souterraines —
Machines mobiles d’abattage de front de taille — Exigences de
sécurité imposées aux haveuses à tambour(s) et aux rabots
Reference number
ISO 19225:2017(E)
©
ISO 2017
ISO 19225:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
ISO 19225:2017(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 List of significant hazards . 3
5 Safety requirements and/or protective measures . 5
5.1 General . 5
5.2 Contact surfaces . 5
5.2.1 Sharp corners and edges . 5
5.2.2 Hot surfaces. 6
5.3 Stability . 6
5.4 Control devices and systems . 7
5.4.1 General requirements . 7
5.4.2 Safety and reliability of control systems . 8
5.4.3 Design of control systems . 8
5.4.4 Failure of power supply .10
5.4.5 Remote control .10
5.4.6 Radio control .10
5.4.7 Automatic control .11
5.4.8 Measures to prevent inadvertent movements .12
5.5 Falling objects and ejected material .13
5.6 Dust control .13
5.6.1 General.13
5.6.2 Dust reduction .13
5.6.3 Dust suppression .13
5.7 Noise .13
5.7.1 General.13
5.7.2 Noise reduction at the source at the design stage .14
5.8 Electrical requirements .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.