ISTP - Doors and windows

This document specifies a test method for the determination of resistance to dynamic loading in order to assess the burglar resistant properties of pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the following means of opening: turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically), pivoted (horizontally and vertically) and rolling as well as fixed constructions.
It is acknowledged that there are two aspects to the burglar resistance performance of construction products, their normal resistance to forced operation and their ability to remain fixed to the building. This test method does not evaluate the performance of the fixing to the building.
The manufacturer's installation instructions will give guidance on the fixing of the product.
An example for the contents of the manufacturer's installation instructions is given in Annex A of prEN 1627:2019.
This document does not apply to doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241.

This document specifies test methods for the determination of bearing capacity (ultimate limit state and serviceability limit state), of connections between curtain walling framing members for which it cannot be calculated in accordance with current codes or conventional calculations based upon the strength of the materials.
Mechanical performances of the curtain walling connections are already assessed in accordance with the provisions described in EN 13830. Additional information with respect to mechanical performance of the connections and direct applications can be determined with this document.

This European Standard specifies a test method for the determination of resistance to static loading in order to assess the burglar resistant properties of pedestrian door sets, windows, curtain walling, grilles and shutters. It is applicable to the following means of opening: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically) and rolling as well as fixed constructions.
This European Standard does not apply to doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241.

This document specifies a test method for the determination of resistance to manual burglary attempts in order to assess the burglar resistant characteristics of pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the following means of opening: turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically), pivoted (horizontally and vertically) and rolling as well as fixed constructions.
This document does not directly cover the resistance of locks and cylinders to attack with picking tools. It also does not cover the attack of electric, electronic and electromagnetic operated burglar resistant construction products using attack methods that might defeat these characteristics.
The manufacturer's installation instructions will give guidance on the fixing of the product.
An example for the contents of the manufacturer’s installation instructions is given in Annex A of prEN 1627:2019.
This document does not apply to doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241.
It is acknowledged that there are two aspects to the burglar resistance performance of construction products, their normal resistance to forced operation and their ability to remain fixed to the building. This test method does not evaluate the performance of the fixing to the building.

This European Standard specifies requirements and classification systems for burglar resistant characteristics of pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the following means of opening: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically) and rolling as well as fixed constructions. It also covers products that include items such as letter plates or ventilation grilles. It specifies requirements for the burglar resistance of a construction product (as defined in 3.1 of this standard).
NOTE 1       The elements of curtain walling have to be assigned to group 1 to 4 product depending on their design.
This European Standard does not directly cover the resistance of locks and cylinders to attack with picking tools. It also does not cover precast concrete elements.
It also does not cover the attack of electric, electronic and electromagnetic operated burglar resistant construction products using attack methods that might defeat these characteristics.
This European Standard does not apply to doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241.
NOTE2   Construction products that can be reached or driven through by vehicles should be protected by appropriate measures such as barriers, extensible ramps, etc.

This document specifies requirements and test methods for durability, strength, security and functionality of window fastener handles.
This document does not apply to the following hardware:
a)   handles - primarily for Tilt and Turn, Tilt-First and Turn-Only hardware, refer to EN 13126-3;
b)   sash fasteners, refer to EN 13126-14;
c)   sliding closing devices, refer to EN 13126-19.
NOTE   The handles covered by this document do not have a spindle and the spur is primarily used to achieve the locked closed position.

This document applies to power-operated pedestrian swing door drives with self closing function using mechanically stored energy for single and double leaf swing doors with fire resistance and smoke control characteristics.
This document does not apply to:
-   Electrically controlled hold-open systems according to EN 14637;
-   Door coordinating devices according to EN 1158;
-   Electrically powered hold-open devices for swing doors according to EN 1155.
If a power-operated pedestrian swing door drive with self closing function is part of a door coordinator device for double leaf swing doors, the complete system will comply with EN 1158.
If a power-operated pedestrian swing door drive with self-closing function is part of an electrically controlled hold-open system, the complete system will comply with EN 14637.

This document defines test and calculation methods for the determination of the reflection and transmission characteristics to be used to determine the thermal and visual comfort performance classes of external blinds, internal blinds and shutters, as specified in prEN 14501:2018.
This document also specifies the method to determine the darkening performance of external blinds, internal blinds and shutters, as specified in prEN 14501:2018.
This document applies to the whole range of shutters, awnings and blinds defined in EN 12216, described as solar protection devices in this document. Some of the characteristics (e.g. gtot) are not applicable when products are not parallel to the glazing (e.g. folding-arm awnings).
NOTE 1   Informative Annex D presents an approach for the determination of characteristics in case of projectable products.
Retro-reflecting products are outside the scope of this document for reflectance measurements.
NOTE 2   Retro-reflecting products refer to products for which the reflected radiation comes back to the light source in the same direction.
Products using a significant amount of fluorescent are outside the scope of this document.
NOTE 3   "Significant amount" refers to materials which are designed to be fluorescent or retroreflective and marketed as such.  It does not refer to trace amounts of materials exhibiting fluorescence, e.g. for colour or identification purposes. Small amounts of materials such as titanium dioxide, which are not primarily included to achieve fluorescence, may be present.

This document specifies the requirements and test procedures for durability, strength, security and functionality of finger catches for windows and door height windows.

This document applies to the whole range of shutters, awnings and blinds defined in EN 12216, described as solar protection devices in this document.
It specifies the corresponding properties and classifications:
-   relating to thermal comfort:
     -       the solar factor (total solar energy transmittance);
     -       the secondary heat transfer factor;
     -       the direct solar transmittance;
-   relating to visual comfort:
    -       the darkening performance;
    -       the night privacy;
    -       the visual contact with the outside;
    -       the glare control;
    -       the daylight utilization;
    -       the rendering of colours.
NOTE   For other purposes, more detailed methods using different parameters can be used.
Some of the characteristics (e.g. gtot) are not applicable when solar protection devices are not parallel to the glazing (e.g. folding-arm awnings).
This document is not applicable to the solar protection devices using fluorescent materials.

This European Standard specifies mechanical requirements and test methods for manually operated doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers manually operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection.
This document applies only to doors which are not part of the load carrying structure of the building.
It does not apply to:
—   lock gates and dock gates;
—   doors on vehicles;
—   doors mainly for the retention of animals unless they are at the site perimeter;
—   doors intended for pedestrian use;
—   railway barriers.
Whenever the term “door” is used in this document, it is deemed to cover the full scope of types and variances of doors, gates and barriers defined by the scope of this European Standard.

This document specifies requirements for performance and testing of Mechatronic Cylinders and their keys and/or electronic keys.
It applies to cylinders for such locks designed to be normally used in buildings. It also applies to cylinders for use with other hardware products such as exit devices, door operators, etc. or monitoring facilities and alarm systems.
It establishes categories of use based on performance tests and grades of security based on design requirements and on performance tests that simulate attack.
This document includes assessment of additional features when they are included in the cylinder design.
This document does not cover any other element of a security system, other than those directly involved in the control of a cylinder.
The suitability of cylinders for use on fire or smoke-door assemblies is determined by fire performance tests conducted in addition to the performance testing specified by this document (see Annex A).

This document specifies the test method for determining the force required when engaging or releasing the hardware of a window and when commencing the movement of a casement or sash, in both opening and closing directions.
This document is applicable to windows where the movement of the casement or sash is a manual operation.
This document is applicable to products of any frame material.

This document provides a means of classifying the performance of opening windows according to their strength in resisting, where appropriate, racking load, static torsion and their operating forces. Special aspects such as those of burglar resistance are not covered.

This European Standard specifies requirements of curtain walling kit intended to be used as a building envelope to provide weather resistance, safety in use and energy economy and heat retention and provides test/assessments/calculation methods and compliance criteria of the related performances.
The curtain walling kit covered by this standard should fulfil its own integrity and mechanical stability but does not contribute to the load bearing or stability of the main building structure, and could be replaced independently of it.
This standard applies to curtain walling kit ranging from a vertical position to ± 15° from the vertical. Any sloping parts should be contained within the curtain walling kit.
This standard is applicable to the whole of the curtain walling kits, including the fixings.
Curtain walling according to this standard is intended to be used as part of the building envelope.
This European Standard does not include:
—   “Patent glazing” (glazed sloping roofs) kits;
—   Roof glazing constructions;
—   Façades made of precast concrete panels as part of the wall (see EN 14992).
NOTE 1   Precast concrete panels may be used in curtain walling kits as infill panels.
NOTE 2   Durability of structural sealed glazing infills is not covered by this standard.

This European Standard provides product category rules (PCR) for Type III environmental declarations for windows and pedestrian doorsets as defined in EN 14351 1, prEN 14351 2. Windows and pedestrian doorsets with fire resistance and/or smoke control characteristics according to EN 16034 are also covered by this standard.
NOTE   Windows that incorporate shutters and/or shutter boxes and/or blinds are in scope of this PCR. For any connected electrical devices (e.g. motors, sensors) - see 6.3.4.2
This European Standard complements the core rules for the product category of construction products as defined in the European Standard EN 15804. The standard is to be used in conjunction with EN 15804, not replace it.
NOTE   The assessment of social and economic performances at product level is not covered by this standard.
The core PCR:
-   defines the parameters to be declared and the way in which they are collated and reported,
-   describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages,
-   defines rules for the development of scenarios,
-   includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied,
-   includes the rules for reporting the predetermined, environmental and health information that is not covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction service(s), as relevant,
-   defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.

1.1   General
This document applies to Mechatronic door furniture (MDF) fitted on the door set which gives the possibility to control the locking and/or release part through an electronic authorization means. This can be operable by credentials (i.e. card, code, biometric).
The MDF according to this document is combined with locks according to EN 12209, EN 14846, prEN 15685 or may be a part of an emergency exit device according to EN 179, EN 1125 or EN 13637.
The MDF may be standalone or linkable to an external control system.
The document would allow classifying the MDF upon several characteristics such as category of use, durability, environmental, security, and type of operating device.
The suitability of the MDF for use on fire or smoke-door assemblies is determined by fire resistance tests conducted in addition to the performance testing specified by this document.
1.2   Exclusions
This document does not cover:
-   mechatronic cylinders according to EN 15684;
-   electromechanical operated locks and striking plates according to EN 14846.

This European Standard specifies requirements for the manual design system sliding doors, sliding corner doors and folding doors of the bi-fold type and multi-panel folding doors but excluding doors and panels. Cycle tests, static load, initial friction and corrosion resistance tests are included for fittings and track only.
This document covers door gear for all industrial, commercial and residential sliding doors and folding doors.
This document does not cover the rollers for horizontal sliding and hardware for inward or outward sliding folding windows (types N Q, R and S) in accordance with EN 13126-15, hardware for Lift and Slide windows (type P) in accordance with EN 13126-16 and hardware for Tilt and Slide windows (type T) in accordance with EN 13126-17.

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of hardware for Tilt and Slide windows and door height windows in accordance with common application as shown in informative Annex C.

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of rollers for horizontal sliding and hardware for inward or outward sliding folding windows and door height windows in accordance with common application as shown in informative Annex C. This standard is applicable to rollers irrespective of whether they are adjustable or not and irrespective of the method or type of fixing or if they are used independently, or in multiples or combinations.

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of hardware for Lift and Slide windows and door height windows in accordance with common application as shown in informative Annex C, regardless of whether the hardware enables an additional tilt position.

This European Standard specifies test methods for the determination of bearing capacity (ultimate limit state and serviceability limit state) of infill support which cannot be calculated in accordance with current codes or conventional calculations based upon the strength of the materials.
Mechanical performances of the infill support are already assessed while testing the glazed product or infill in regards to safety in use. Additional information with respect to mechanical performance of the infill support and direct applications can be determined with this standard.

This European Standard identifies material independent performance characteristics that are applicable to internal pedestrian doorsets without resistance to fire and/or smoke leakage characteristics.
This document applies to doorsets intended to be used internally for construction works:
- in escape routes not subject to fire and/or smoke leakage;
- for specific uses with specific requirements;
- for communication only.
NOTE These above intended uses can be combined, for example escape routes with specific requirements.
Products covered by this European standard are power operated hinged or manually operated internal pedestrian doorsets and screens with flush or paneled leaves, single or double leaf, which could be completed with:
- related building hardware;
- door closing devices.
NOTE Manually operated doors with door closing devices are not power operated doors.
- integral fanlights;
- adjacent parts that are contained within a single frame for inclusion in a single aperture.
Products covered by this European standard are not assessed for structural applications.
This European standard does not apply to:
- industrial, commercial and garage doors and gates according to EN 13241-1;
- external pedestrian doorsets according to EN 14351-1;
- door leaves placed on the market separately;
- door frames placed on the market separately;
- power operated pedestrian doorsets according to EN 16361.
The noise emission of power operated interior hinged doors is not considered to be a relevant hazard; therefore this standard does not contain any specific requirements to noise.

This European Standard specifies the general terminology for windows and pedestrian doors. The various types are illustrated by figures.

This part of prEN 13126 specifies requirements and test methods for durability, strength, security and function of mechanically operated variable/parallel geometry stay hinges (with or without a friction system) whether fitted, with integral restrictors or not, in accordance with common application as shown in informative Annex D.
By means of this standard, the user of recognized tested hardware can assume that with correct usage, the variable/parallel geometry stay hinges (with or without a friction system) for windows conform to prescribed requirements.
NOTE 1   Balancing stay arms/hinges do not represent a friction system.
NOTE 2   For the purposes of this standard, the friction system is achieved by friction pads or similar.

This European Standard details the general terminology for internal blinds, external blinds and shutters as they are normally used and applied to buildings.
Internal blinds, external blinds and shutters are covered by product standards EN 13120, EN 13561 and EN 13659, respectively.
This European Standard does not apply to industrial, commercial or garage doors
NOTE   The figures in this standard are solely for the purpose of terminology and should not be seen as recommendations for design, construction etc.

This European Standard specifies the requirements and test procedures for durability, strength, security and function of Tilt and Turn, Tilt-First and Turn-Only hardware components or sets for windows and door height windows in accordance with common application as shown in informative Annex C.
NOTE   To maintain the guaranteed characteristics during the utilization period, the manufacturers' product information and the manufacturers' maintenance and service instructions will be complied with in a manner that can be proven.

This European Standard specifies requirements for performance and testing of mechatronic padlocks (MPs) and their keys and/or electronic keys.
It establishes categories of use based on performance tests and grades of security based on design requirements and on performance tests that simulate attack.  If the design incorporates mechanical security means in addition to the mechatronic means, these are also tested.
This European Standard does not cover any other element of a security system, other than those directly involved in the control of a padlock.  
This European Standard does not cover the physical testing of multi-function devices such as Smartphones that may be used as part of the control system.

This European Standard specifies requirements and test methods for the safety in use of any type of power operated door, gate and barrier including their components, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers power operated vertically moving commercial doors used in retail premises which are mainly provided for the access of persons rather than vehicles or goods
This European Standard deals with all significant hazards, hazardous situations and events relevant to the power operation of doors, gates and barriers, as identified in Annex C.
European Standard does not apply to
- lock gates and dock gates;
- doors on lifts;
- doors on vehicles;
- armoured doors;
- doors mainly for the retention of animals;
- theatre textile curtains;
- horizontally moving power operated doorsets intended for pedestrian use;
- doors outside the reach of people (such as crane gantry fences);
- railway barriers;
- barriers used solely for vehicles (e.g. barriers on motorway, public car parks).
Also this European Standard does not apply to power operated doors, gates and barriers which are manufactured before the date of publication of this European Standard.
Requirements for specific characteristics (such as fire resistance, blast-resistance, acoustic, escape route function, burglar resistance or thermal insulation, etc.) which certain doors are required to comply with are not specified in this document. If the specifications of a standard on the special characteristics of such doors are in conflict with the requirements of this European Standard, that standard has preference.

This European Standard defines the classification of test results for completely assembled windows and external and internal pedestrian doorsets of any materials after testing in accordance with FprEN 1026.

1.1   General
This European Standard specifies the safety and performance requirements, except resistance to fire and smoke control characteristics, for industrial, commercial, garage doors and gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
Fire resisting and/or smoke control characteristics for industrial, commercial, garage doors and gates are covered by EN 16034.
This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods.
These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard.
These devices can be manually or power operated.
This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000 6 3.
1.2   Exclusions
This European Standard does not apply to the following which are intended for a different use:
-   lock gates and dock gates;
-   doors on lifts;
-   doors on vehicles;
-   armoured doors;
-   doors mainly for the retention of animals;
-   theatre textile curtains;
-   horizontally moving power operated doors mainly intended for pedestrian use in accordance with EN 16361;
-   revolving doors of any size;
-   railway barriers;
-   barriers used solely for vehicles.
This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition.
This European Standard does not contain any specific requirement for doors which are moving because of energy stored by dedicated means from human power such as manually tensioned springs.
This European Standard does not contain any specific requirements for doors on escape routes. The ability to open the door leaf safely and easily cannot normally be achieved by industrial, commercial and garage doors due to size, weight and/or mode of operation.
The noise emission of powered doors and gates is not considered to be a relevant hazard. Therefore this European Standard does not contain any specific requirements on noise in relation to the Machinery Directive.
1.3   Specific applications
This European Standard should also apply to power operated doors which have been created by the addition of power operation to an installed manual door in respect of the relevant requirements. Annex ZA does not apply to this kind of door.
It also identifies requirements and classes of performance for additional characteristics considered to be of importance to the trade.
When a door is part of the load carrying structure of the building the requirements of this European Standard can apply on a voluntary basis in addition to the requirements for the load carrying structure, which are not dealt with in this European Standard. Annex ZA does not apply for this kind of doors.

This European Standard identifies material independent performance characteristics, except resistance to fire and smoke control characteristics, that are applicable to windows (including roof windows, roof windows with external fire resistance and door height windows), external pedestrian doorsets (and their assemblies, including unframed glass doorsets, escape route doorsets) and screens.
Fire resisting and/or smoke control characteristics for pedestrian doorsets and openable windows are covered by EN 16034.
This European Standard applies to:
a)   fixed windows or fixed lights, manually or power operated windows and door height windows, and screens for installation in vertical wall apertures and roof windows for installation in roofs, complete with:
1)   related hardware, if any;
2)   weather stripping, if any;
3)   glazed apertures when intended to have glazed apertures;
4)   with or without incorporated shutters and/or shutter boxes and/or blinds;
and manually or power operated windows, roof windows, door height windows and screens that are:
5)   fully or partially glazed including any non-transparent infill;
6)   fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding);
b)   manually operated external pedestrian doorsets with flush or panelled leaves, complete with:
1)   integral fanlights, if any;
2)   adjacent parts that are contained within a single frame for inclusion in a single aperture, if any.
The windows covered by this standard are not assessed regarding their ability to release (to open).
The products covered by this European Standard are not assessed for structural applications.
This European Standard does not apply to:
-   rooflights according to EN 1873 and EN 14963;
-   curtain walling according to EN 13830;
-   industrial, commercial and garage doors and gates according to EN 13241;
-   internal pedestrian doorsets according to prEN 14351 2;
-   revolving doorsets;
-   power operated pedestrian doorsets according to EN 16361;
-   windows intended to be part of internal partition.

This European Standard de¬scribes terminology used in documents, drawings, specifications etc., when referring to the detailed elements of curtain wall¬ing and provides a comprehensive, though not total, list of regu¬lar terms.
It does not set out to repeat those physical definitions properly included within individual curtain walling standards related to performance requirements and associated test methods.

This standard defines performance requirements of curtain walling (excluding ‘glass in building’ which is classified under EN 12600) under soft body impact load criteria specified herein and tested in accordance with EN 13049.
Its criteria is targeted to safety in use and integrity of curtain wall in the event of sudden impact forces on the curtain wall surfaces. Compliance with the performance requirement is determined by the laboratory test.
It applies to those areas of curtain walling which face onto areas of human activity, either internally or externally and takes account of accidental impacts brought on by people going about their normal daily activities and impacts brought about by equipment and similar devices for maintenance, cleaning, repair and similar occasional activities.
It does not set out to define performance requirements of impact under exceptional circumstances such as acts of vandalism, vehicular collision, firearm projectiles, etc..
This standard will have no bearing whatsoever on any National Building / Health and Safety regulations which may exist and whose requirements shall apply separately and in parallel with these test performance requirements.

This European Standard specifies requirements and test/assessment/calculation methods for external and internal power operated pedestrian doorsets, other than swing type, initially designed for installation with power operation.
Such doorset constructions may be operated electro-mechanically, electro-hydraulically or pneumatically.
These doorsets include power operated pedestrian sliding doorsets, revolving doorsets, balanced (sliding/swing) doorsets and folding doorsets with one or more horizontally moving leaves.
This European Standard applies to power operated pedestrian doorsets with flush or panelled leaves, complete with:
-   integral fanlights, if any;
NOTE 1   A fanlight is a panel over a door which is part of the doorset.
-   side panels that are contained within a single frame for inclusion in a single aperture, if any.
The intended uses of the products covered by this European Standard are:
-   doorsets for external use in escape routes and other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use in construction works;
-   doorsets for internal use in escape routes, communication and other declared specific uses and/or uses subject to other specific requirements, in particular noise and safety-in-use in construction works;
-   doorsets for internal use in escape routes, communication and other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy and safety-in-use in construction works.
The products covered by this European Standard are not assessed for structural applications of the building.
This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-2.
This European Standard does not apply to:
-   external pedestrian doorsets according to EN 14351-1;
-   internal pedestrian doorsets according to prEN 14351-2;
-   fire resistance and/or smoke control characteristics according to EN 16034;
-   lifts doorsets;
-   vehicles doorsets;
-   doorsets used in industrial processes;
-   doorsets in partition walls;
-   doorsets outside the reach of people (such as crane gantry fences);
-   turnstiles;
-   platform doorsets.
This European Standard does not cover special functions of doorsets (e.g. security, fire aspects in banks, airports, etc.).
This European Standard does not deal with any specific requirements on noise emitted from power operated doorsets, other than swing type, initially designed for installation with power operation as their noise emission is not considered to be a relevant hazard.
NOTE 2   Noise emission of power operated doorsets, other than swing type, initially designed for installation with power operation is not a significant hazard for the users of these products. It is a comfort aspect.

Corrigendum: TC origin - correction of a value in Table 1.

This European Standard defines the method of test to determine the resistance to wind load for completely assembled windows and doors of any materials when submitted to positive and negative test pressures.
This test method is designed to take account of conditions in use, when the window or door is installed in accordance with the manufactures specification and the requirements of relevant European Standards and codes of practice.
This European Standard does not apply to joints between the window or door frame and the building construction. This standard is not intended to evaluate strength of the glass.

This European Standard defines the test method to be used to determine the watertightness of completely assembled windows and doorsets of any materials. This test method is designed to take account of conditions in use, when the window or doorset is installed in accordance with the manufacturer’s specification and the requirements of relevant European Standards and codes of practice.
This European Standard does not apply to the joints between the window or doorset frame and the building construction.

This European Standard defines the classification of test results for completely assembled windows and doors of any materials after testing in accordance with EN 12211.

This European Standard specifies requirements and test methods for durability, strength, security and functionality of mechanically operated locks and their locking plates:
a)   for use in doors in buildings;
b)   for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such doors to close reliably and thus achieve self-closing in the event of fire; and
c)   for use on locked fire doors to maintain the fire integrity of the door assembly.
This European standard covers locks and their locking plates which are either manufactured and placed on the market in their entirety by one producer or produced by more than one producer, or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.
This European Standard specifies mechanically operated locks and locking systems intended for use in different environmental and security conditions, thus necessitating different grades.
This European standard does not specify Multipoint locks or their locking plates which are specified by prEN 15685.
This European Standard specifies the dimensions and properties required for security
Assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies is beyond the scope of this European Standard.

This European Standard defines the test method to be used to determine the air permeability of completely assembled windows and doorsets of any material, when submitted to positive or negative test pressures. This test method is designed to take account of conditions in use, when the window or doorset is installed in accordance with the manufacturer’s specification and the requirements of relevant European Standards and codes of practice.
This European Standard does not apply to the joints between the window or doorset frame and the building construction.

This European Standard identifies material independent the performance characteristic that is applicable to door leafs exposed to extended periods of wetness and frequent splash water.
This European Standard does not apply to doors installed in etching environments or doors cleaned with etching detergents having a pH value lower than 5 or higher than 9.

CEN/TC origin corrigendum - revision of figures in Annex C and editorial changes in the Annex F.

This European standard specifies requirements for the manufacture; performance and testing of electrically controlled exit systems, designed for use on escape routes. These systems consist of at least the following elements:- Initiating element for requesting the release of electrical locking element in order to exit;- Electrical locking element for securing an exit door;- Electrical controlling element for supplying, connecting and controlling electrical locking element and initiating element. In addition, these electrically controlled exit systems can include time delay and/or denied exit mode. This European Standard covers electrically controlled exit systems placed on the market as a complete unit (e.g. mortise lock, lever handle, keeper, initiating element, electrical locking element, electrical controlling element, etc.). The components are tested as a single product. This European Standard covers electrically controlled exit systems which are either manufactured and placed on the market in their entirety by one manufacturer or assembled from sub-assemblies produced by more than one manufacturer and subsequently placed on the market as a kit in a single transaction. The suitability of an electrically controlled exit system for use on fire/smoke resisting door assemblies is determined by fire performance tests conducted in addition to the performance tests required by this European Standard.

This European Standard applies to cylinders for such locks as are normally used in buildings and are designed to be used with cylinders.
This European Standard specifies performance and other requirements for the strength, security, durability, performance and corrosion resistance of cylinders and their original keys. It establishes one category of use, three categories of durability, two categories each for fire and corrosion resistance all based on performance tests as well as six grades of key related security based on design requirements and three grades on performance tests that simulate attack.
This European Standard includes tests of satisfactory operation at temperatures between  -20 °C and +65 °C. It specifies test methods to be used on cylinders and their protective measures linked with these cylinders and recommended by the manufacturer.
Corrosion resistance is specified by reference to the requirements of the European Standard EN 1670 on the protection of corrosion for locks and building hardware.
The suitability of cylinders for use on fire or smoke-door assemblies is determined by fire performance tests conducted in addition to the performance testing required by this European Standard. Since suitability for use on fire doors is not essential in every situation, the manufacturer has the option to state if the cylinder conforms to these additional requirements or not. If so claimed, cylinders shall comply with the requirements laid down in the relevant European Standard EN 1634-1 or prEN 1634-2, see Annex A.
Assessment of fire resistance of grade 1 doors is beyond the scope of this document.
On occasions there may be a need for additional functions within the design of the cylinder. Purchasers should satisfy themselves that the products are suitable for their intended use.

This European Standard specifies the performance requirements for shutters and external venetian blinds intended to be fitted externally to buildings and other construction works. It deals also with the significant hazards for assembly, transport, installation, operation and maintenance (see list of significant machine hazards in Annex C).
It applies to all shutters and external venetian blinds whatever their use and nature of the materials used, as follows and defined in EN 12216:
-   external venetian blind, roller shutter, wing shutter, Venetian shutter, flat-closing concertina shutter, concertina shutter or sliding panel shutter, with or without a system of projection.
These products can be operated manually with or without compensating spring, or by means of electric motors (power operated products). However, the durability and endurance of the autonomous supply for power operated shutters and external venetian blinds not connected to the mains supply are not covered.
This European Standard deals also with all significant hazards, hazardous situations and events when shutters and external venetian blinds are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex D).
This European Standard covers shutters and external venetian blinds mounted externally. In case such products are installed internally, they should fulfil all relevant safety requirements defined in EN 13120.
The noise emission of power operated shutters and external venetian blinds is not considered to be a relevant hazard health and safety requirements. Therefore this European Standard does not contain any specific requirements on noise health and safety objective.

This European Standard specifies the performance requirements for blinds and awnings intended to be fitted externally to buildings and other construction works. It deals also with the significant hazards for assembly, transport, installation, operation and maintenance (see list of significant machine hazards in Annex B).
It applies to all external blinds and awnings whatever their design and nature of the materials used, as follows and defined in EN 12216:
-   folding arm awning, trellis arm awning, pivot arm awning, slide arm awning, vertical roller blind, marquisolette, façade awning, skylight awning, conservatory awning, Pergola awning, Dutch awning, insect screen; brise-soleil.
This European Standard does not cover the wind resistance of non-retractable products, e.g. Dutch awnings and brise-soleil.
The structural part to which the Pergola awning is fixed is not covered.
The products covered by this European Standard may be operated manually, with or without compensating springs or by means of electric motors (power operated products). However, the durability and endurance of the autonomous supply for power operated external blinds and awnings not connected to the mains supply are not covered.
This European Standard deals also with all significant hazards, hazardous situations and events when external blinds and awnings are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex B).
This European Standard covers external blinds and awnings mounted externally. In case such products are installed internally, they should fulfil all relevant safety requirements defined in EN 13120.
The noise emission of power operated external blinds and awnings is not considered to be a relevant hazard according to the machinery health and safety requirements. Therefore this European Standard does not contain any specific requirements on noise health and safety objective.

This European Standard is applicable to hinged/pivoted and sliding doorsets with latches, for pedestrian use. It defines the classification of the test results for the forces and/or torques to open/close doors and to engage/release and lock/unlock the hardware using a key or handle, after testing in accordance with EN 12046 2.
It is only applicable to the manual operation of doorsets.
The classification of forces for doorsets with self-closing devices engaged is excluded from this test method. It is also not applicable to doorsets with special hardware, e.g. emergency exit devices.
The tests are applicable to doorsets of any material.
The operation of some glazed doors (door high windows) involves hardware with latches and may be classified in accordance with this European Standard.

CCMC mistake: editorial correction in Table 6 in the English version

This Part of EN 13126 specifies requirements and test methods for durability, strength, security and functionality of devices that restrict the opening of windows and door height windows.
On devices that restrict the opening of
-   Tilt&Turn, Tilt-First, Turn-Only, or Tilt-Only windows and door-height windows
-   horizontal and vertical pivot windows and door height windows
-   side-hung Casements and top-hung windows and door height windows (opening outwards)
this part of EN 13126 only applies, if a restriction of the opening occurs within the specification in Annex A, E or G of EN 1191:2012 in accordance with the intended use specified by the manufacturer