IEC/TC 59 - IEC_TC_59

IEC 60704-2-9:2024 is available as IEC 60704-2-9:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60704-2-9:2024 applies to electric hand-held hairdryers for household and similar use supplied from mains, which operate with a flow of air. These particular requirements can also be applied to analogous electrically operated devices such as hairstyling appliances, which produce the airflow by a fan. Helmet-type hairdryers are excluded from this document. This document does not apply to hair care appliances with radiant heating. For determining and verifying noise emission values declared in product specifications, see IEC 60704-3. This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Alignment with IEC 60704-1:2021. This part 2-9 is intended to be used in conjunction with the fourth edition of IEC 60704-1:2021: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements.

IEC 63086-2-1:2024 specifies test methods for measuring the performance of electrically powered household and similar air cleaners intended for the reduction of particulate pollutants.

IEC 60704-2-2:2023 is available as IEC 60704-2-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60704-2-2:2023 applies to electric fan heaters, designed for placing on the floor, table or counter, etc., or for mounting. This document does not apply to: - electric storage room heaters; - room humidifiers; - room dehumidifiers; - air cleaners; - heaters designed exclusively for industrial purposes. For determining and verifying noise emission values declared in product specifications, refer to IEC 60704-3:2019. This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - alignment with the latest edition of IEC 60704-1:2021, - addition of several ISO standards, - revision of built-in-conditions, - addition of requirements on climatic conditions and on background noise. This part 2-2 is intended to be used in conjunction with the fourth edition of IEC 60704-1:2021, Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements. This part 2-2 supplements or modifies the corresponding clauses in IEC 60704-1:2021.

IEC 60704-2-13:2023 applies to cooking fume extractors for household and similar use intended for filtering the air of a room or for exhausting the air out of a room, including their accessories and their component parts. It also applies to cooking fume extractors where the fan is mounted separately from the appliance inside or outside of the room where the appliance is located, but controlled by the appliance when the fan is defined in the technical documentation. This document deals also with down-draft systems that are arranged beside, behind or under the cooking appliance. Measurements carried out in accordance with this document determine the noise emission into the room, from which cooking fumes are extracted. Noise emission to the outside (e.g. through air ducts) are not considered. This fourth edition cancels and replaces the third edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) alignment with IEC 61591:2023; b) change of title, scope and definitions 3.103 and 3.104: this document deals with cooking fume extractors (this covers range hoods and down-draft systems); c) exhaust pipe of down-draft systems specified; d) built-in range hoods in recirculation mode with an air outlet device specified; e) alignment with IEC 60704-1:2021. This document is to be used in conjunction with IEC 60704-1:2021.

IEC 61591:2023 applies to cooking fume extractors incorporating a fan for the recirculation or extraction mode situated in a household kitchen. It can also be used for cooking fume extractors where the fan is mounted separately from the appliance, but controlled by the appliance when the fan is defined in the technical documentation (e.g. name plate data) and instructions for installation. This document deals also with down-draft systems arranged beside, behind or under the cooking appliance. This document defines the main performance characteristics of these appliances, which are of interest to the user, and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. This document does not deal with safety requirements that are in accordance with IEC 60335-1 and IEC 60335-2-31. Cooking fume extractors without fans operated by a central ventilation system are covered in EN 13141-3. This third edition cancels and replaces the second edition published in 2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) new definition of working point, see 3.19; b) new definition for lowest setting and automatic setting, see 3.17 and 3.18; c) revised requirements for installation and positioning, see 6.2; d) added a normative reference ISO 5801 for the specification of the pressure compensation chamber, see Clause 10; e) separate clauses for determining the volumetric airflow and fluid dynamic efficiency, see Clauses 10 and 11; f) new approach for determining the fluid dynamic efficiency ("9-point calculation"); g) new definitions, new clause and new Annex B regarding the measurement of low-power modes; h) new Annex A: assumption for the parameter b.

IEC 60350-1:2023 is available as IEC 60350-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60350-1:2023 specifies methods for measuring the performance of electric cooking ranges, ovens, steam ovens, and grills for household use. This document is also applicable to portable appliances with similar functionalities that were previously covered by the withdrawn IEC 61817. The ovens covered by this document can be with or without microwave function. Manufacturers are expected to define the primary cooking function of the appliance – microwave function or thermal heat. The primary cooking function is measured with an existing method according to energy consumption. If the primary cooking function is declared in the instruction manual as a microwave function, IEC 60705 is applied for energy consumption measurement. If the primary cooking function is declared as a thermal heat, then IEC 60350-1 is applied for energy consumption measurement. If the primary function is not declared by the manufacturer, the performance of the microwave function and thermal heat is measured as far as it is possible. For measurement of energy consumption and time for heating a load (see Clause 8), this document is furthermore not applicable to: - microwave combination function; - ovens with reciprocating trays or turntable; - small cavity ovens (see 3.16); - ovens without adjustable temperature control; - heating functions and eco functions other than defined in this document; - appliances with only solo steam function. This document does not apply to microwave ovens (IEC 60705). This document defines the main performance characteristics of these appliances that are of interest to the user and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. This document does not deal with safety requirements (IEC 60335-2-6 and IEC 60335-2-9). Appliances covered by this document can be built-in or for placing on a working surface or the floor. There is no measurement method for the energy consumption for grilling and steam functions available. This third edition cancels and replaces the second edition published in 2016 and Interpretation Sheet 1:2021. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) new definitions for heating function, eco function and definitions relevant for low power mode considerations are amended in Clause 3; b) order of clauses is changed; c) revision of 5.3; d) update of 6.2 in order to improve the reliability of volume measurement; e) removal of 6.7, Level of shelf; f) revision of Clause 7 concerning the accuracy of eco functions with residual heat use; g) revision of Clause 8 in order to improve the reliability of the method for measuring the energy consumption, especially regarding anti-circumvention; h) unique energy consumption measurement for all heating functions and eco functions with an indication of the energy consumption for a temperature increase of 165 K (compared to 155 K currently for forced air circulation function, for example), which results in higher energy consumption values compared to the previous edition; i) Ry replaced by L* in Clause 9 and reference to IEC TS 63350; j) cook

This Standard specifies methods for measuring the performance of electric storage water heaters to produce domestic potable or non-potable hot water for household and similar use. The object is to state and define the principal performance characteristics of electric storage water heaters and to describe the test methods for measuring these characteristics. NOTE 1 This standard does not apply to; - storage water heaters that use electricity as a secondary source of heating the water; - storage water heaters that do not use a tank to storage hot water; - electric storage water heaters that do not meet the minimum (or maximum) output performance of the smallest (or biggest) load profile, as defined in Table 4. - water-heaters without thermal insulation NOTE 2 This standard does not specify safety requirements. For safety requirements see IEC 60335-1 in conjunction with IEC 60335-2-21.

This part of IEC 63237 provides a method of standardizing the descriptions of household electrical appliances. The aims of this standard are - to define a common language for customers and suppliers through the publication of classes, represented by properties and their attributes; - enable electronic data exchange by machines (including information technology systems, see M2M communication); - to optimize workflows between customers and suppliers as well as in processes such as engineering, development and purchasing within their own organizations; - to offer also a dictionary to legislators and - to reduce transaction costs. The standard describes household electrical appliances using properties and makes the associated properties available in the IEC Common Data Dictionary (IEC CDD). Furthermore, this document provides rules, methods and the generic data structure for product specific classification standards and on how to produce a reference dictionary based on IEC 61360 Series. This in turn creates a descriptive basis of company internal and external descriptions of household electrical appliances based on structured classes and lists of properties. NOTE The terms "class", "properties" and "attributes" are defined in Clause 3 following the established definitions in IEC and ISO documents.

This International Standard specifies test methods to measure the performance of electrically operated spray seats for household and similar use. This standard applies to spray seats including tank-type spray seats, instantaneous-type spray seats and combination-type spray seats. This document does not apply to the electrically operated spray seats that are intended for medical and/or assistive functions NOTE: This International Standard does not specify acoustical noise requirements for electrical spray seats. Acoustical noise measurements are specified in IEC 60704-1 and IEC 60704-2-x.

IEC 62885-9:2019 lists the characteristic performance parameters for walk-behind and ride-on floor scrubbers and sweepers and other floor cleaning machines in accordance with IEC 60335-2-72:2016. The intent is to serve the manufacturers in describing parameters for their manuals and their literature. This may include all or some of the parameters listed in this definition document. This first edition of IEC 62885-9 cancels and replaces IEC 62826:2014 and constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 62826:2014 a) reference to a dated version of IEC 60335-2-72 to ensure consistency between the two standards; b) a new calculation for the nominal current consumption in 22.1; c) a new calculation for the maximum net run-time of commercial floor treatment machines in 22.2; d) update of the Bibliography.

IEC 63136:2019 applies to manually loaded under-counter one-tank and one-tank hood-type electrically heated dishwashing machines for washing plates, dishes, glassware, cutlery and similar articles. These machines are used in commercial kitchens, such as restaurants, canteens, hospitals and in businesses such as bakeries, butchers' shops, etc. This document does not apply to commercial dishwashers with transport systems (flight-type and rack conveyor dishwashers) and utensil washers. This document does not apply to undercounter water-change dishwashers. This document does not apply to appliances designed exclusively for industrial purposes. The object is to state and define the principal performance characteristics of electric dishwashers for commercial use and to describe the standard methods of measuring these characteristics. The characteristics are measured by washing plates. This document is concerned neither with safety nor with minimum performance requirements.

States and defines the principal performance characteristics of electric dry irons, steam irons, spray irons,and steam irons with seperate water reservoir or boiler/generator not exceeding 5L in capacity, for household or similar use.

IEC 62885-8:2019 is applicable for measurements of the performance of mains-operated dry vacuum cleaners, including water filter vacuum cleaners, for commercial use. The requirements for the construction and testing covered by this document are applied in addition to the requirements for commercial vacuum cleaners in IEC 60335-2-69. The purpose of this document is to specify essential performance characteristics of dry vacuum cleaners for commercial use that are of interest to operators and to describe methods for measuring these characteristics. Due to the influence of environmental conditions, variations in time, origin of test materials and proficiency of the operator, some of the described test methods will give more reliable results when applied for comparative testing of a number of appliances at the same time, in the same laboratory and by the same operator. The methods here can be applied with modifications for surface-cleaning product types or technologies not currently covered within the scope. For safety requirements, reference is made to IEC 60335-1 and IEC 60335-2-69. This first edition cancels and replaces IEC PAS 62611, published in 2009.

IEC 61855:2022 applies to electrical appliances for household and similar use for drying and styling hair (including their accessories). This document defines the main performance characteristics that are of interest to the user and specifies methods of measuring these characteristics. Appliances to which this document applies include: – Hair dryers; – Hair curlers; – Hair straighteners. This document does not specify the requirements for performance. This document does not deal with safety requirements (IEC 60335-2-23). This document does not apply to electric hair clippers or trimmers. This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the definitions of hair dryers, hair curlers and hair straighteners are updated; b) the measurement of temperature profile of the outlet air of hair dryers is added; c) the measurement of temperature profile of the whole work area of hair curlers is added; d) the measurement of temperature profile of the heating plate of hair straighteners is added; e) the measurement method for air flow of hair dryers is introduced; f) the measurement method for anion emission concentration of anion hair dryers is introduced; g) the measurement method for tension of hair straighteners is introduced; h) the service life test for hair dryers, hair curlers and hair straighteners is introduced.

IEC 60704-2-3:2017 is intended to be used in conjunction with the third edition (2010) of IEC 60704-1, Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements. The relevant text of Part 1 as amended by this standard establishes the test code for dishwashers. This edition includes the following significant technical changes with respect to the previous edition: a) it doesn’t contain the description of an appropriate test enclosure because the test enclosure has been incorporated in IEC 60704-1:2010, Annex B; b) the values of standard deviations of sound power levels determined according to this part are given in Clause 1; c) to prevent an appliance being programmed to recognize the test cycles, and reacting specifically to them, in this new edition an artificial soil is used in addition to the unsoiled load and the rinse aid container has to be filled. This artificial soil successive may build up a film on the load. Therefore, detergent also has to be used. An initial test has shown that no foam is to be expected. This publication is to be read in conjunction with IEC 60704-1:2010.

IEC 60704-3:2019 is available as IEC 60704-3:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60704-3:2019 describes procedures for determining and verifying the declared values of the noise emitted by household and similar appliances. It applies to all categories of household and similar electrical appliances covered by IEC 60704-1 and all parts of IEC 60704-2, which include particular requirements for special categories of appliances. It applies to appliances being produced in quantity, such as in batches, series or lots, which are manufactured to the same technical specification and characterized by the same declared value of noise emission. This part of IEC 60704: – considers the term "declaration" to include all means for providing information on the noise emission values to potential users (consumers) of the appliances; this includes labels, brochures, advertisements, commercial and technical information papers, etc.; – considers the declaration for appliances manufactured by mass production; – specifies a simple statistical method for verifying the declared values by investigating a sample of only three appliances. This International Standard is to be used in conjunction with IEC 60704-1:2010 and the latest edition of IEC 60704-2 (all parts). This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. It includes the following significant technical changes with respect to the previous edition: a) in Annex A, standard deviations that are now specified for various appliance categories in the parts of IEC 60704-2 have been excluded from Table A.1; b) furthermore, this edition makes reference to new standards and is implementing ISO/IEC Directives, Part 2 in a more accurate manner.

IEC 60879:2019 specifies the performance-measuring methods of comfort fans and regulators for household and similar purposes, including conventional fans, tower fans and bladeless fans, their rated voltage being not more than 250 V for single-phase fans and 480 V for other fans, and their rated power input being less than 125 W. According to the testing method, the comfort fans are classified into two groups: – pedestal fans, table fans, wall fans, louvre fans, tower fans, bladeless fans; – ceiling fans. Wherever applicable, the term "fan" used in this document includes its associated regulator, if any. This document does not apply to: – safety of electric fans for household and similar purposes (IEC 60335-2-80); – performance of ventilating fans (IEC 60665); – electromagnetic compatibility of fans (CISPR 14-1 and CISPR 14-2, IEC 61000-3-2, IEC 61000-3-3). This second edition cancels and replaces the first edition published in 1986. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the definitions of fans have been revised; b) the test methods for the different types of fans have been revised to allow modern test instrumentation to be used; c) acoustic noise measurement and standby power measurement methods have been introduced.

IEC 60704-2-16:2019 applies to single-unit electric washer-dryers for household and similar use intended for placing on the floor against a wall, for building-in or placing under a counter, a kitchen worktop or under a sink, for wall-mounting or on a counter. This standard is concerned with objective methods of engineering accuracy for determining sound power levels of airborne acoustical noise. Requirements for the declaration of noise emission values are not within the scope of this document. This part is intended to be used in conjunction with IEC 60704-1:2010.

IEC 60704-2-18:2022 applies to single-unit electric water heaters for household and similar use intended for placing on the floor against a wall, for building-in or placing under a counter, a kitchen worktop or under a sink, for wall-mounting or on a counter. This document does not apply to: – combustion water heaters; – water kettles; – heat pump water heaters; – conventional electric storage water heaters as defined in IEC 60335-2-21:2012, Clause 1; – instantaneous electric water heaters without any noise-producing components such as motors and pumps. This document is intended to be used in conjunction with IEC 60704‑1:2021.

This document deals with the methods for measuring the performance of electrically powered toothbrushes. This document applies to electrically powered toothbrushes used for cleaning the teeth with electric energy to drive. Rechargeable toothbrushes and primary battery powered toothbrushes, both for adult and child, are within the scope of this standard. This standard is just to specify the measurement method but does not define any limit value. NOTE: The electrically powered toothbrushes are classified as follows: Classification with regard to supply modes: - primary battery powered toothbrush - rechargeable toothbrush -- wireless rechargeable toothbrush -- corded rechargeable toothbrush Classification with regard to moving modes: - rotary electrically powered toothbrush - reciprocated electrically powered toothbrush -- linear reciprocated electrically powered toothbrush -- rotational reciprocated electrically powered toothbrush - vibratory electrically powered toothbrush The different types are clarified for information, since there is no difference in the tests to be done, except for the types of primary battery powered toothbrush and rechargeable toothbrush.

This document specifies the performance and the corresponding methods of test of AC ventilating fans for household and similar purposes intended for air forcing and exhaust, driven by single-phase AC motors having a power consumption of less than 125 W (including any associated regulators) for use on single-phase AC circuits not exceeding 250 V. This document applies to ventilating fans such as partition fans for walls and windows and duct fans. NOTE This document does not apply to: - the safety of electric fans for household and similar purposes (IEC 60335-2- 80); - the performance of comfort fans (IEC 60879); - range hoods and other cooking fume extractors (IEC 61591); - airborne acoustic noise for fans (IEC 60704-2-7); - electromagnetic compatibility of fans (CISPR 14-1 and CISPR 14-2, IEC 61000-3-2, IEC 61000-3-3).

This clause of IEC 63159-1:2021 is applicable except as follows. Addition: This document applies to open outlet, single point-of-use, electric instantaneous water heaters intended for household or similar use, for showering purposes without downstream mixing. This document only specifies tests for the assessment of energy efficiency. This document does not apply to electrical instantaneous water heaters covered by other parts of this series of standards.

This document applies to electric instantaneous water heaters for domestic hot water heating for household and similar applications, which show both of the following characteristics: - fulfilling at least one load pattern from Annex A; - heating up to temperatures below the boiling temperature. This document specifies terms, definitions and measurement methods for the assessment of energy efficiency. This document does not take into account requirements regarding the safety of the appliances.

This clause of IEC 63159-1:2021 is applicable with the following exception: Addition: This document applies to electrical instantaneous water heaters designed to operate as multifunctional appliances with an electric rated power > 2 kW. This document specifies tests for the assessment of the performance.

This standard applies to electric direct -acting room heaters. They may be portable,
stationary, fixed, or built-in.
It does not apply to:
— thermal-storage room heaters (IEC 531);
- heating appliances incorporated in the building structure;
- central heating systems;
— heaters connected to an air duct;
- wall-paper, carpets or drapes incorporating flexible heating elements.
This standard defines the main performance characteristics of direct-acting room
heaters and specifies methods for measuring these characteristics, for the information of
users.
This standard does not specify values for performance characteristics.
NOTE - This standard does not deal with:
- safety requirements (IEC 335-2-30);
acoustical noise of fan heaters (IEC 704-2-2).

IEC 60704-1:2021 is available as IEC 60704-1:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60704-1:2021 applies to electric appliances (including their accessories or components) for household and similar use, supplied from mains or from batteries. By "similar use" is understood the use in conditions similar to those found in households, for example in inns, coffee houses, tea rooms, hotels, barber or hairdresser shops, launderettes, etc., if not otherwise specified in the IEC 60704-2 series. This document does not apply to: – appliances, equipment, or machines designed exclusively for industrial or professional purposes; – appliances that are integrated parts of a building or its installations, such as equipment for air conditioning, heating and ventilating (except household fans, cooker hoods, free-standing heating appliances, dehumidifiers, air cleaners, and stand-alone water heaters), oil burners for central heating, pumps for water supply and for sewage systems; – separate motors or generators and – appliances exclusively for outdoor use. For determining and verifying noise emission values declared in product specifications, see IEC 60704-3:2019. This fourth edition cancels and replaces the third edition published in 2010. This edition constitutes a technical revision. It includes the following significant changes with respect to the previous edition: a) update of references (especially to ISO standards); b) revision of requirements on climatic conditions; c) revision of requirements on background noise level.

IEC 62885-5:2018 lists the characteristic performance parameters for high pressure cleaners and steam cleaners in accordance with IEC 60335-2-79. The intent is to serve the manufacturers in describing parameters that fit in their manuals and in their literature. This can include all or some of the parameters listed in this definition document.

No scope available

Not available

IEC 60675-3:2020 applies to electric direct-acting room heaters. This document defines performance characteristics related to the radiant effect and specifies methods for measuring the radiation efficiency for the information of users. This document is used to measure the radiation efficiency of direct-acting room heaters. This International Standard is to be used in conjunction with IEC 60675:1994, IEC 60675:1994/AMD1:1998 and IEC 60675:1994/AMD2:2018.

This part of IEC 62885 is applicable to dry-cleaning robots for household use or under
conditions similar to those in households.
The purpose of this document is to specify the essential performance characteristics of
dry-cleaning robots that are of interest to users and to describe methods for measuring these
characteristics.
This document is neither concerned with safety requirements nor with performance
requirements.

IEC 60675-2:2020 applies to electric direct-acting room heaters. This document defines performance characteristics related to the radiant effect and specifies methods for measuring the radiant factor for the information of users. This document is used to measure the radiant factor of direct-acting room heaters. This International Standard is to be used in conjunction with IEC 60675:1994, IEC 60675:1994/AMD1:1998 and IEC 60675:1994/AMD2:2018.

IEC 60350-2:2017(E) defines methods for measuring the performance of electric hobs for household use. Appliances covered by this document can be built-in or designed to be placed on a work surface. The hob can also be a part of a cooking range. This document does not apply to portable appliances for cooking, grilling and similar functions (see IEC 61817). This document defines the main performance characteristics of hobs which are of interest to the user and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. This edition includes the following significant technical changes with respect to the previous edition: a) terms and definitions revised and new definitions added (see 3); b) following the new market trend, requirements related to so-called flexible and free induction zones - in this document named as cooking areas - are added; c) specification for standardized and alternative cookware is introduced (see 5.6); d) measurement procedure reflecting a household-like cooking process for measuring the energy consumption is introduced (see Clause 7 and Annex A); e) revision of measurement procedure for determining the accuracy of control (see Clause 8); f) new reproducible measurement procedure for assessing the heat distribution (see Clause 9); g) additional requirements (according to IEC 62301:2011) on how to measure low-power modes.

IEC 60704-2-1:2020 is available as IEC 60704-2-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60704-2-1:2020 is applicable for the determination of airborne acoustical noise of mains operated and cordless dry vacuum cleaners for household use or under conditions similar to those in households. This part of IEC 60704 does not apply to vacuum cleaners for industrial or professional purposes. This edition includes the following significant technical changes with respect to the previous edition: a) product scope is extended to cordless and similar vacuum cleaners; b) definitions of "cleaning head", "active nozzle" and "standard Wilton test carpet" have been added; c) specification of standard Wilton test carpet has been removed; reference is made to IEC/TS 62885-1; d) specific requirements on equipping and pre-conditioning have been added; e) topic ageing of test carpet is addressed. This Part 2-1 supplements or modifies the corresponding clauses in IEC 60704-1:2010.

IEC 60704-2-17:2020 describes the determination of the noise emission of dry-cleaning robots under normal operating conditions on carpet and hard floors. This document applies to electrical dry-cleaning robots (including their accessories and their component parts) for household use or under conditions similar to those in households. This document applies to electrical dry-cleaning robots operating in dry conditions only. Some additions and modifications for dry-cleaning robots operating in wet conditions are under consideration. This document does not apply to dry-cleaning robots for industrial or professional purposes. This document does not apply to – manually operated vacuum cleaners, and – dry-cleaning robots for outdoor use. This Part 2-17 is intended to be used in conjunction with IEC 60704-1:2010. The relevant text of IEC 60704-1:2010 as amended by this publication establishes the test code for dry-cleaning robots.

IEC 62512:2012 provides a globally applicable and agreed method to test the washing and drying function of washer-dryers. Although this standard is based on IEC 61121:2012 on tumble dryers and IEC 60456:2010 on clothes washers, it specifies the conditions needed to test the combined function of washing and drying. The main elements of this standard are: - the definition of the loads to be tested in continuous and interrupted operation cycles; - the method for testing automatic and not automatic operation of the drying cycles; - the way to handle the load for interrupted operation cycles; - the correction to be applied to test results for continuous and interrupted operation cycles.

IEC 62849:2016 applies to mobile household robots and provides performance testing and evaluation methods for common features of various mobile household robots. This standard is neither concerned with safety nor with performance requirements. This standard will cover the generic performance test methods for mobile household robots within one document. However this current version is applicable for indoor floor supported wheeled or wheel-track robots with focus on mobility and power consumption related performance. As the needs for manipulation related performance grows, it will be added into this generic performance standard.

IEC 62863:2017(E) applies to reciprocating electric hair clippers or trimmers for household use. This document deals with the methods of measuring performances of electric hair clippers or trimmers for household use with a rated voltage not greater than 250V. This document does not specify safety or performance requirements. This document does not apply to professional hair clippers or trimmers, animal shearers and animal clippers, or shavers. For shavers, refer to IEC 61254.

IEC 62885-4:2020 is applicable to measurements of the performance of cordless dry vacuum cleaners for household use or under conditions similar to those in households. The results obtained under this document are intended to be comparable to the results obtained under IEC 62885-2 for mains-connected vacuums. The purpose of this document is to specify essential performance characteristics of cordless dry vacuum cleaners which are of interest to users and to describe methods for measuring these characteristics. This standard is to be read in conjunction with IEC 62885-2:2016, to which it refers, and which is applicable unless otherwise specified in this standard.

IEC 63252:2020 defines methods for the measurement of energy consumption of vending machines, whether or not fitted with refrigerating appliances. The standard applies (but is not limited) to the following categories of machines: - Refrigerated closed-fronted can and bottle machines where the products are held in stacks - Refrigerated glass-fronted can and bottle, confectionery and snack machines - Refrigerated glass-fronted machines entirely for perishable foodstuffs - Refrigerated dual-temperature glass-fronted machines - Confectionery and snack machines that are not refrigerated - Combination machines consisting of two different categories of machine in the same housing and powered by one chiller The following types of vending machine are excluded from this document: - drink machines dispensing hot and/or cold drinks into cups; - machines with a food-heating function; - vending machines operating at temperatures below 0 °C; or - any machine including one or more of these compartments. For verification purposes, it is essential to apply all of the tests specified to a single unit. The tests can also be made individually for the study of a particular characteristic. This document does not deal with any characteristics of machine design other than energy consumption.

IEC 63169:2020 deals with a test to simulate the weight loss of leafy produce, given certain conditions of temperature, humidity and air movement in one or more test zones. The test can only be applied to spaces larger than 200 mm × 150 mm ×100 mm (L × W × H). The aim of the test is to measure the weight loss rate by measuring the weight of a test tray prior to the test and after a given duration. Weight loss is one of the considerations for shelf life of produce. Other considerations such as condensation will be addressed in future amendments.

IEC 61591:2019 applies to cooking fume extractors incorporating a fan for the recirculation or extraction mode situated in a household kitchen. It can also be used for cooking fume extractors where the fan is mounted separately from the appliance, but controlled by the appliance when the fan is defined in the technical documentation (e.g. name plate data) and instructions for installation. This document deals also with down-draft systems arranged beside, behind or under the cooking appliance. This document defines the main performance characteristics of these appliances, which are of interest to the user, and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. This document does not deal with safety requirements that are in accordance with IEC 60335-1 and IEC 60335-2-31. This second edition cancels and replaces the first edition published in 1997, Amendment 1:2005 and Amendment 2:2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) new subclause about instruments and measurements (see 6.6); b) new procedure for measuring the fluid dynamic efficiency (FDE), which follows the CENELEC proposal in principle; c) revised procedure for determining the odour reduction for cooking fume extractors in recirculation mode (see Clause 12); d) modification to the measurement of the effectiveness of the lighting system (see Clause 11); e) clearer procedure to measure the grease absorption (see Clause 13);

IEC 63086-1:2020 applies to electrically powered household and similar air cleaners intended for use on rated single-phase AC input voltage circuits not exceeding 250 V and DC input voltage circuits not exceeding 48 V. If the test methods in this document are applied to combination products (air conditioners, humidifiers, dehumidifiers, heaters, etc.) with air cleaning function, they are only aimed at their air cleaning function when tested. Battery-operated appliances are within the scope of this document. Dual-supply appliances, either mains-supplied or battery-operated, are regarded as battery-operated appliances when operated in the battery mode. This document is not applicable to: - appliances intended exclusively for industrial purposes; - appliances intended for use in medical treatment locations, such as surgical suites, laboratories, medical treatments rooms, etc. - household range hoods or cooking fume extractors – see IEC 61591. This first edition cancels and replaces IEC PAS 62587 published in 2008.

IEC 63008:2020 contains accessibility requirements to enable more accessible use of certain elements found on household and similar electrical appliances by older persons and persons with disabilities. It provides guidance to achieve accessible design of only control elements (e.g. knobs, buttons), including control panels, display screens and doors, lids, drawers and handles. It does not enable the full assessment of the overall accessibility of a household appliance. This document covers supporting and auxiliary functions that a user performs regularly. Assembly, installation, configuration or repair of appliances are excluded. This document provides test methods and data that support accessible design. This document gives guidance to apply ISO/TR 22441:2008 and ISO/IEC Guide 71:2014 to the design of various interactive elements of household and similar electrical appliances. It does not deal with remote controls, or control via network or mobile applications. Touch control elements are covered in this document, but new interaction controls, such as gestures and speech control, are not covered. This document does not deal with safety issues.

IEC 60704-2-8:2020 is available as IEC 60704-2-8:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60704-2-8:2020 applies to electric shavers, clippers or trimmers for domestic and similar use, supplied from mains or secondary batteries or primary batteries. The term "similar use" is understood to mean the use in hotels, hospitals, shops, offices, etc. This document does not apply to shavers, clippers or trimmers that are powered by means other than electrical, for example by a spring-device. If possible, this document can also be applied to analogous electrically operated devices, such as depilating devices. This second edition cancels and replaces the first edition published in 1997. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the scope of the products has been enlarged to include hair clippers and trimmers; b) it includes standard deviations of sound power levels in 1.1.3; c) the normative references have been updated (ISO 3744:2010 and ISO 3743-1:2010); d) it is adjusted with respect to IEC 60704-1:2010; e) it has been updated to comply with the ISO/IEC Directives, Part 2. This Part 2-8 is intended to be used in conjunction with third edition (2010) of IEC 60704-1, Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements. This Part 2-8 supplements or modifies the corresponding clauses in IEC 60704-1:2010, so as to establish the test code for shavers, hair clippers or trimmers.