65/2014 - Commission Delegated Regulation (EU) No 65/2014 of 1 October 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of domestic ovens and range hoods

IEC 61591:2023 applies to cooking fume extractors incorporating a fan for the recirculation or extraction mode situated in a household kitchen. It can also be used for cooking fume extractors where the fan is mounted separately from the appliance, but controlled by the appliance when the fan is defined in the technical documentation (e.g. name plate data) and instructions for installation. This document deals also with down-draft systems arranged beside, behind or under the cooking appliance. This document defines the main performance characteristics of these appliances, which are of interest to the user, and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. This document does not deal with safety requirements that are in accordance with IEC 60335-1 and IEC 60335-2-31. Cooking fume extractors without fans operated by a central ventilation system are covered in EN 13141-3. This third edition cancels and replaces the second edition published in 2019. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) new definition of working point, see 3.19;
b) new definition for lowest setting and automatic setting, see 3.17 and 3.18;
c) revised requirements for installation and positioning, see 6.2;
d) added a normative reference ISO 5801 for the specification of the pressure compensation chamber, see Clause 10;
e) separate clauses for determining the volumetric airflow and fluid dynamic efficiency, see Clauses 10 and 11;
f) new approach for determining the fluid dynamic efficiency ("9-point calculation");
g) new definitions, new clause and new Annex B regarding the measurement of low-power modes;
h) new Annex A: assumption for the parameter b.

IEC 61591:2023 applies to cooking fume extractors incorporating a fan for the recirculation or extraction mode situated in a household kitchen. It can also be used for cooking fume extractors where the fan is mounted separately from the appliance, but controlled by the appliance when the fan is defined in the technical documentation (e.g. name plate data) and instructions for installation. This document deals also with down-draft systems arranged beside, behind or under the cooking appliance. This document defines the main performance characteristics of these appliances, which are of interest to the user, and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. This document does not deal with safety requirements that are in accordance with IEC 60335-1 and IEC 60335-2-31. Cooking fume extractors without fans operated by a central ventilation system are covered in EN 13141-3. This third edition cancels and replaces the second edition published in 2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) new definition of working point, see 3.19; b) new definition for lowest setting and automatic setting, see 3.17 and 3.18; c) revised requirements for installation and positioning, see 6.2; d) added a normative reference ISO 5801 for the specification of the pressure compensation chamber, see Clause 10; e) separate clauses for determining the volumetric airflow and fluid dynamic efficiency, see Clauses 10 and 11; f) new approach for determining the fluid dynamic efficiency ("9-point calculation"); g) new definitions, new clause and new Annex B regarding the measurement of low-power modes; h) new Annex A: assumption for the parameter b.

IEC 60350-1:2023 is available as IEC 60350-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60350-1:2023 specifies methods for measuring the performance of electric cooking ranges, ovens, steam ovens, and grills for household use. This document is also applicable to portable appliances with similar functionalities that were previously covered by the withdrawn IEC 61817. The ovens covered by this document can be with or without microwave function. Manufacturers are expected to define the primary cooking function of the appliance – microwave function or thermal heat. The primary cooking function is measured with an existing method according to energy consumption. If the primary cooking function is declared in the instruction manual as a microwave function, IEC 60705 is applied for energy consumption measurement. If the primary cooking function is declared as a thermal heat, then IEC 60350-1 is applied for energy consumption measurement. If the primary function is not declared by the manufacturer, the performance of the microwave function and thermal heat is measured as far as it is possible. For measurement of energy consumption and time for heating a load (see Clause 8), this document is furthermore not applicable to:
- microwave combination function;
- ovens with reciprocating trays or turntable;
- small cavity ovens (see 3.16);
- ovens without adjustable temperature control;
- heating functions and eco functions other than defined in this document;
- appliances with only solo steam function.
This document does not apply to microwave ovens (IEC 60705). This document defines the main performance characteristics of these appliances that are of interest to the user and specifies methods for measuring these characteristics.
This document does not specify a classification or ranking for performance. This document does not deal with safety requirements (IEC 60335-2-6 and IEC 60335-2-9). Appliances covered by this document can be built-in or for placing on a working surface or the floor. There is no measurement method for the energy consumption for grilling and steam functions available. This third edition cancels and replaces the second edition published in 2016 and Interpretation Sheet 1:2021. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) new definitions for heating function, eco function and definitions relevant for low power mode considerations are amended in Clause 3;
b) order of clauses is changed;
c) revision of 5.3;
d) update of 6.2 in order to improve the reliability of volume measurement;
e) removal of 6.7, Level of shelf;
f) revision of Clause 7 concerning the accuracy of eco functions with residual heat use;
g) revision of Clause 8 in order to improve the reliability of the method for measuring the energy consumption, especially regarding anti-circumvention;
h) unique energy consumption measurement for all heating functions and eco functions with an indication of the energy consumption for a temperature increase of 165 K (compared to 155 K currently for forced air circulation function, for example), which results in higher energy consumption values compared to the previous edition;
i) Ry replaced by L* in Clause 9 and reference to IEC TS 63350;
j) cook

IEC 60350-1:2023 is available as IEC 60350-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60350-1:2023 specifies methods for measuring the performance of electric cooking ranges, ovens, steam ovens, and grills for household use. This document is also applicable to portable appliances with similar functionalities that were previously covered by the withdrawn IEC 61817. The ovens covered by this document can be with or without microwave function. Manufacturers are expected to define the primary cooking function of the appliance – microwave function or thermal heat. The primary cooking function is measured with an existing method according to energy consumption. If the primary cooking function is declared in the instruction manual as a microwave function, IEC 60705 is applied for energy consumption measurement. If the primary cooking function is declared as a thermal heat, then IEC 60350-1 is applied for energy consumption measurement. If the primary function is not declared by the manufacturer, the performance of the microwave function and thermal heat is measured as far as it is possible. For measurement of energy consumption and time for heating a load (see Clause 8), this document is furthermore not applicable to: - microwave combination function; - ovens with reciprocating trays or turntable; - small cavity ovens (see 3.16); - ovens without adjustable temperature control; - heating functions and eco functions other than defined in this document; - appliances with only solo steam function. This document does not apply to microwave ovens (IEC 60705). This document defines the main performance characteristics of these appliances that are of interest to the user and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. This document does not deal with safety requirements (IEC 60335-2-6 and IEC 60335-2-9). Appliances covered by this document can be built-in or for placing on a working surface or the floor. There is no measurement method for the energy consumption for grilling and steam functions available. This third edition cancels and replaces the second edition published in 2016 and Interpretation Sheet 1:2021. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) new definitions for heating function, eco function and definitions relevant for low power mode considerations are amended in Clause 3; b) order of clauses is changed; c) revision of 5.3; d) update of 6.2 in order to improve the reliability of volume measurement; e) removal of 6.7, Level of shelf; f) revision of Clause 7 concerning the accuracy of eco functions with residual heat use; g) revision of Clause 8 in order to improve the reliability of the method for measuring the energy consumption, especially regarding anti-circumvention; h) unique energy consumption measurement for all heating functions and eco functions with an indication of the energy consumption for a temperature increase of 165 K (compared to 155 K currently for forced air circulation function, for example), which results in higher energy consumption values compared to the previous edition; i) Ry replaced by L* in Clause 9 and reference to IEC TS 63350; j) cook

Not available

Not available

EN 15181:2007+A1specifies the method of test for determining the gas energy consumption in gas-fired domestic ovens when they are being used in one or more of the oven cooking modes defined in 3. 1. It applies to the gas-fired domestic ovens which are capable of utilizing gases of group H or group E !or third family gases", possibly after conversion according to instructions for use.This European Standard applies to these gas-fired domestic ovens, whether they are separate appliances or component parts of domestic cooking appliances.This European Standard also applies to domestic appliances that can utilize gas and/or electrical energy to provide heat for cooking when the ovens are utilizing gas energy to provide heat for cooking, but not when electric energy is used to provide any or all of the heat for cooking in the oven.It is not applicable to:- microwave combination ovens;- small cavities ovens (3.2);- oven cavities not provided with devices to detect and control the temperature for the preparation of food;- cooking modes others than defined in 3.1.1 and 3.1.2;- ovens connected to a chimney in which the gas energy for cooking provides, by design, also space and/or water heating;!Deleted text"This European Standard is concerned neither with safety nor with overall performance requirements.

IEC 61591:2019 applies to cooking fume extractors incorporating a fan for the recirculation or extraction mode situated in a household kitchen.
It can also be used for cooking fume extractors where the fan is mounted separately from the appliance, but controlled by the appliance when the fan is defined in the technical documentation (e.g. name plate data) and instructions for installation.
This document deals also with down-draft systems arranged beside, behind or under the cooking appliance.
This document defines the main performance characteristics of these appliances, which are of interest to the user, and specifies methods for measuring these characteristics.
This document does not specify a classification or ranking for performance.
This document does not deal with safety requirements that are in accordance with IEC 60335-1 and IEC 60335-2-31.
This second edition cancels and replaces the first edition published in 1997, Amendment 1:2005 and Amendment 2:2010. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) new subclause about instruments and measurements (see 6.6);
b) new procedure for measuring the fluid dynamic efficiency (FDE), which follows the CENELEC proposal in principle;
c) revised procedure for determining the odour reduction for cooking fume extractors in recirculation mode (see Clause 12);
d) modification to the measurement of the effectiveness of the lighting system (see Clause 11);
e) clearer procedure to measure the grease absorption (see Clause 13);

N/A

N/A

IEC 61591:2019 applies to cooking fume extractors incorporating a fan for the recirculation or extraction mode situated in a household kitchen. It can also be used for cooking fume extractors where the fan is mounted separately from the appliance, but controlled by the appliance when the fan is defined in the technical documentation (e.g. name plate data) and instructions for installation. This document deals also with down-draft systems arranged beside, behind or under the cooking appliance. This document defines the main performance characteristics of these appliances, which are of interest to the user, and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. This document does not deal with safety requirements that are in accordance with IEC 60335-1 and IEC 60335-2-31. This second edition cancels and replaces the first edition published in 1997, Amendment 1:2005 and Amendment 2:2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) new subclause about instruments and measurements (see 6.6); b) new procedure for measuring the fluid dynamic efficiency (FDE), which follows the CENELEC proposal in principle; c) revised procedure for determining the odour reduction for cooking fume extractors in recirculation mode (see Clause 12); d) modification to the measurement of the effectiveness of the lighting system (see Clause 11); e) clearer procedure to measure the grease absorption (see Clause 13);

EN 15181:2007+A1specifies the method of test for determining the gas energy consumption in gas-fired domestic ovens when they are being used in one or more of the oven cooking modes defined in 3. 1. It applies to the gas-fired domestic ovens which are capable of utilizing gases of group H or group E !or third family gases", possibly after conversion according to instructions for use.This European Standard applies to these gas-fired domestic ovens, whether they are separate appliances or component parts of domestic cooking appliances.This European Standard also applies to domestic appliances that can utilize gas and/or electrical energy to provide heat for cooking when the ovens are utilizing gas energy to provide heat for cooking, but not when electric energy is used to provide any or all of the heat for cooking in the oven.It is not applicable to:- microwave combination ovens;- small cavities ovens (3.2);- oven cavities not provided with devices to detect and control the temperature for the preparation of food;- cooking modes others than defined in 3.1.1 and 3.1.2;- ovens connected to a chimney in which the gas energy for cooking provides, by design, also space and/or water heating;!Deleted text"This European Standard is concerned neither with safety nor with overall performance requirements.

IEC 60350-1:2016 is available as IEC 60350-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60350-1:2016 specifies methods for measuring the performance of electric cooking ranges, ovens, steam ovens, and grills for household use. The ovens covered by this standard may be with or without microwave function. Manufacturers should define the primary cooking function of the appliance microwave function or thermal heat. The primary cooking function should be measured with an existing method according to energy consumption. If the primary cooking function is declared in the instruction manual as a microwave function, IEC 60705 is applied for energy consumption measurement. If the primary cooking function is declared as a thermal heat, then IEC 60350-1 is applied for energy consumption measurement. If the primary function is not declared by the manufacturer, the performance of the microwave function and thermal heat should be measured as far as it is possible. This standard defines the main performance characteristics of these appliances which are of interest to the user and specifies methods for measuring these characteristics. This standard does not specify a classification or ranking for performance. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - new definitions for "set to off mode" and "set to standby mode" are included in Clause 3; - reference to ISO 80000 regarding rounding; - more exact determination of the mass of the appliances (6.2); - update of the existing 7.3 in order to improve the clarity of procedure; - additional temperature requirement in 7.4.3 to ensure an adequate temperature setting during the energy measurement process; - editorial changes in 7.6.1.3, 7.6.2.1, 7.6.2.2 and 7.6.2.3; - revision of Clause 8 in order to increase the repeatability for the measurements for steam ovens; - Clause 12 "Standby power" is renamed to "Consumption measurement of low power modes" and the content is adapted for IEC 62301:2011; - replacing the supplier for the colouring measurement device in Clause C.6, because the previous device is no longer available; - adaptation of Annex A to the new supplier of colouring measurement devices; - adaptation of Annex E; - measurement method for measuring the consumption of the cooling down period is added in the informative, new Annex G; - measurement method to check applied microwave energy during the measurement according to 7.4 is added in the informative Annex H; - new Annex I for marking the temperature setting for checking the oven temperature.

IEC 60350-1:2016 is available as <>
href="https://webstore.iec.ch/publication/24694">IEC 60350-1:2016
RLV which contains the International Standard and its Redline
version, showing all changes of the technical content compared to
the previous edition.
IEC 60350-1:2016 specifies methods for measuring the performance of electric cooking ranges, ovens, steam ovens, and grills for household use. The ovens covered by this standard may be with or without microwave function. Manufacturers should define the primary cooking function of the appliance microwave function or thermal heat. The primary cooking function should be measured with an existing method according to energy consumption. If the primary cooking function is declared in the instruction manual as a microwave function, IEC 60705 is applied for energy consumption measurement. If the primary cooking function is declared as a thermal heat, then IEC 60350-1 is applied for energy consumption measurement. If the primary function is not declared by the manufacturer, the performance of the microwave function and thermal heat should be measured as far as it is possible. This standard defines the main performance characteristics of these appliances which are of interest to the user and specifies methods for measuring these characteristics. This standard does not specify a classification or ranking for performance. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- new definitions for "set to off mode" and "set to standby mode" are included in Clause 3;
- reference to ISO 80000 regarding rounding;
- more exact determination of the mass of the appliances (6.2);
- update of the existing 7.3 in order to improve the clarity of procedure;
- additional temperature requirement in 7.4.3 to ensure an adequate temperature setting during the energy measurement process;
- editorial changes in 7.6.1.3, 7.6.2.1, 7.6.2.2 and 7.6.2.3;
- revision of Clause 8 in order to increase the repeatability for the measurements for steam ovens;
- Clause 12 "Standby power" is renamed to "Consumption measurement of low power modes" and the content is adapted for IEC 62301:2011;
- replacing the supplier for the colouring measurement device in Clause C.6, because the previous device is no longer available;
- adaptation of Annex A to the new supplier of colouring measurement devices;
- adaptation of Annex E;
- measurement method for measuring the consumption of the cooling down period is added in the informative, new Annex G;
- measurement method to check applied microwave energy during the measurement according to 7.4 is added in the informative Annex H;
- new Annex I for marking the temperature setting for checking the oven temperature.

IEC 61649:2008 provides methods for analysing data from a Weibull distribution using continuous parameters such as time to failure, cycles to failure, mechanical stress, etc. This standard is applicable whenever data on strength parameters, e.g. times to failure, cycles, stress, etc. are available for a random sample of items operating under test conditions or in-service, for the purpose of estimating measures of reliability performance of the population from which these items were drawn. The main changes with respect to the previous edition are as follows: the title has been shortened and simplified to read 'Weibull analysis'; and provision of methods for both analytical and graphical solutions have been added.

Applies to range hoods incorporating a fan for the recirculation or forced removal of air from above a hob situated in a household kitchen. This standard defines the main performance characteristics of range hoods and specifies methods for measuring these characteristics, for the information of users.

This document specifies the method of test for determining the gas energy consumption in gas-fired domestic ovens when they are being used in one or more of the oven cooking modes defined in 3.1. It applies to the gas-fired domestic ovens which are capable of using combustible gases described in Clause 1 of EN 30-1-1:2021+A1:2023, possibly after conversion according to instructions for installation and adjustment.
This document applies to these gas-fired domestic ovens, whether they are individual appliances or component parts of domestic cooking appliances.
This document also applies to domestic gas cooking appliances incorporating electrical elements, provided that these elements are not used for supplying heat for cooking during the measurement.
It is not applicable to:
-   microwave combination ovens;
-   small cavity ovens (as defined in 3.2);
-   oven cavities not provided with devices to detect and control the temperature for the preparation of food;
-   cooking modes others than those defined in 3.1.1 and 3.1.2;
-   ovens connected to a chimney in which the gas energy for cooking provides, by design, also space and/or water heating.
This document does not cover neither safety requirements nor other overall performance requirements.

This document specifies the method of test for determining the gas energy consumption in gas-fired domestic ovens when they are being used in one or more of the oven cooking modes defined in 3.1. It applies to the gas-fired domestic ovens which are capable of using combustible gases described in Clause 1 of EN 30-1-1:2021+A1:2023, possibly after conversion according to instructions for installation and adjustment.
This document applies to these gas-fired domestic ovens, whether they are individual appliances or component parts of domestic cooking appliances.
This document also applies to domestic gas cooking appliances incorporating electrical elements, provided that these elements are not used for supplying heat for cooking during the measurement.
It is not applicable to:
-   microwave combination ovens;
-   small cavity ovens (as defined in 3.2);
-   oven cavities not provided with devices to detect and control the temperature for the preparation of food;
-   cooking modes others than those defined in 3.1.1 and 3.1.2;
-   ovens connected to a chimney in which the gas energy for cooking provides, by design, also space and/or water heating.
This document does not cover neither safety requirements nor other overall performance requirements.

This European Standard specifies the method of test for determining the gas energy consumption in gas-fired domestic ovens when they are being used in one or more of the oven cooking modes defined in 3.1. It applies to the gas-fired domestic ovens which are capable of utilizing gases of group H or group E, possibly after conversion according to instructions for use.
This European Standard applies to these gas-fired domestic ovens, whether they are separate appliances or component parts of domestic cooking appliances.
This European Standard also applies to domestic appliances that can utilize gas and/or electrical energy to provide heat for cooking when the ovens are utilizing gas energy to provide heat for cooking, but not when electric energy is used to provide any or all of the heat for cooking in the oven.
It is not applicable to:
-   microwave combination ovens;
-   small cavities ovens (3.2);
-   oven cavities not provided with devices to detect and control the temperature for the preparation of food;
-   cooking modes others than defined in 3.1.1 and 3.1.2;
-   ovens connected to a chimney in which the gas energy for cooking provides, by design, also space and/or water heating;
-   appliances designed for use with gases of the third family only.
This European Standard is concerned neither with safety nor with overall performance requirements.

This European Standard sets out the requirements and the test method for the rational use of energy of gas burning domestic cooking appliances, in accordance with EN 30 1-1:2008+A3:2013, Clause 1.
This European Standard covers type testing only.
NOTE   The calorific values specified in this European Standard are based on the gross calorific value (Hs) as defined in EN 30–1-1:2008+A3:2013.

D148/C004: NWI approved

Applies to range hoods incorporating a fan for the recirculation or forced removal of air from above a hob situated in a household kitchen. This standard defines the main performance characteristics of range hoods and specifies methods for measuring these characteristics, for the information of users.

Applies to range hoods incorporating a fan for the recirculation or forced removal of air from above a hob situated in a household kitchen. This standard defines the main performance characteristics of range hoods and specifies methods for measuring these characteristics, for the information of users.

Applies to range hoods incorporating a fan for the recirculation or forced removal of air from above a hob situated in a household kitchen. This standard defines the main performance characteristics of range hoods and specifies methods for measuring these characteristics, for the information of users.

Applies to range hoods incorporating a fan for the recirculation or forced removal of air from above a hob situated in a household kitchen. The standard defines the mainperformance characteristics of range hoods, and methods of measurement.

D146/C058: NWI approved  for UAP*2014-04-22: UAP allocated to cpalagi@cencenelec.eu

IEC 60350-1:2011 specifies methods for measuring the performance of electric cooking ranges, ovens, steam ovens, and grills for household use. The ovens covered by this standard may be with or without microwave function. This standard defines the main performance characteristics of these appliances which are of interest to the user and specifies methods for measuring these characteristics. This standard does not specify requirements for performance. This first edition of IEC 60350-1 is related to IEC 60350:1999 which shall be separated in two parts: one part for cooking ranges, ovens and steam ovens and the other part for hobs. This part 1 of IEC 60350 covers cooking ranges, ovens, steam ovens and grills, and IEC 60350-2 covers hobs. The contents of the corrigendum of February 2012 have been included in this copy.

D146/C058: NWI approved for UAP*2014-04-03: UAP allocated to cpalagi@cencenelec.eu

IEC 60350-2:2011 defines methods for measuring the performance of electric hobs for household use. Appliances covered by this standard may be built-in or for placing on a working surface or the floor. The hob can also be a part of a cooking range. This standard defines the main performance characteristics of these appliances which are of interest to the user and specifies methods for measuring these characteristics. This standard does not specify requirements for performance. This first edition of IEC 60350-2 is related to IEC 60350:1999 which shall be separated in two parts: one part for cooking ranges, ovens and steam ovens and the other part for hobs. This part 2 of IEC 60350 covers hobs, and IEC 60350-1 covers ovens.

This European Standard specifies the method of test for determining the gas energy consumption in gas-fired domestic ovens when they are being used in one or more of the oven cooking modes defined in 3.1. It applies to the gas-fired domestic ovens which are capable of utilizing gases of group H or group E, possibly after conversion according to instructions for use.
This European Standard applies to these gas-fired domestic ovens, whether they are separate appliances or component parts of domestic cooking appliances.
This European Standard also applies to domestic appliances that can utilize gas and/or electrical energy to provide heat for cooking when the ovens are utilizing gas energy to provide heat for cooking, but not when electric energy is used to provide any or all of the heat for cooking in the oven.
It is not applicable to:
-   microwave combination ovens;
-   small cavities ovens (3.2);
-   oven cavities not provided with devices to detect and control the temperature for the preparation of food;
-   cooking modes others than defined in 3.1.1 and 3.1.2;
-   ovens connected to a chimney in which the gas energy for cooking provides, by design, also space and/or water heating;
-   appliances designed for use with gases of the third family only.
This European Standard is concerned neither with safety nor with overall performance requirements.

D148/C004: NWI approved

D146/C058: NWI approved  for UAP*2014-04-22: UAP allocated to cpalagi@cencenelec.eu

Applies to range hoods incorporating a fan for the recirculation or forced removal of air from above a hob situated in a household kitchen. This standard defines the main performance characteristics of range hoods and specifies methods for measuring these characteristics, for the information of users.

IEC 60350-1:2011 specifies methods for measuring the performance of electric cooking ranges, ovens, steam ovens, and grills for household use. The ovens covered by this standard may be with or without microwave function. This standard defines the main performance characteristics of these appliances which are of interest to the user and specifies methods for measuring these characteristics. This standard does not specify requirements for performance. This first edition of IEC 60350-1 is related to IEC 60350:1999 which shall be separated in two parts: one part for cooking ranges, ovens and steam ovens and the other part for hobs. This part 1 of IEC 60350 covers cooking ranges, ovens, steam ovens and grills, and IEC 60350-2 covers hobs. The contents of the corrigendum of February 2012 have been included in this copy.

Applies to range hoods incorporating a fan for the recirculation or forced removal of air from above a hob situated in a household kitchen. This standard defines the main performance characteristics of range hoods and specifies methods for measuring these characteristics, for the information of users.

Applies to range hoods incorporating a fan for the recirculation or forced removal of air from above a hob situated in a household kitchen. The standard defines the mainperformance characteristics of range hoods, and methods of measurement.