Graphical symbols for thermal cutting equipment (ISO 7287:2002)

Bildzeichen für Einrichtungen zum thermischen Schneiden (ISO 7287:2002)

Diese Internationale Norm enthält Bildzei-chen zur Anwen-dung an Ein-richtungen zum thermischen Schn-ei-den (z. B. Stelltei-len und An-zei-gee-lementen), um Per-sonen an die-sen Einrichtun-gen über Ge-brau-ch und Bedie-nung zu unter-richten.Normative Verweisungen
Die folgenden normativen Do-kumente enthalten Festlegungen, die durch Verweisung in diesem Text Bestandteil dieser Internatio-nalen Norm sind. Bei datierten Verweisungen gelten spätere Änderungen oder Über-arbeitungen dieser Publikationen nicht. Anwender dieser Inter-nationalen Norm werden jedoch gebeten, die Möglichkeit zu prüfen, die jeweils neuesten Aus-gaben der nachfolgend ange-gebenen normativen Dokumen-te anzuwenden. Bei undatierten Ver-weisungen gilt die letzte Ausgabe des in Bezug genommenenen no-rmativen Dokuments. Mitglieder von ISO und IEC führen Verzeich-nisse der gültigen Internationalen Normen.
ISO 3461-1:1988, Allgemeine Grundlagen für das Gestalten von graphischen Symbolen - Teil 1: Graphische Symbole zur Anwen-dung an Ein-richtungen (Bildzei-chen).
ISO 7000, Graphische Symbole zur Anwendung an Einrichtungen - lnhaltsverzeichnis und Übersicht.
ISO 81714-1:1999, Gestal-tung von graphischen Sym-bolen für die Anwendung in der technischen Produkt-dokumentation - Teil 1: Grundregeln.
IEC 60417-2:1998, Graphische Symbole für Betriebsmittel -  Teil 2: Originale der Symbole.

Symboles graphiques pour équipements de coupage thermique (ISO 7287:2002)

La présente Norme internationale présente des symboles graphiques destinés à être placés sur des équipements de coupage thermique (par exemple aux postes de commande et de contrôle) afin de renseigner les utilisateurs de ces équipements quant à leur mise en oeuvre et leur fonctionnement.

Grafični simboli za opremo za toplotno rezanje (ISO 7287:2002)

General Information

Status
Published
Publication Date
30-Apr-2003
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2003
Due Date
01-May-2003
Completion Date
01-May-2003

Relations

Buy Standard

Standard
EN ISO 7287:2003
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2003
1DGRPHãþD
SIST EN ISO 7287:1999
*UDILþQLVLPEROL]DRSUHPR]DWRSORWQRUH]DQMH ,62
Graphical symbols for thermal cutting equipment (ISO 7287:2002)
Bildzeichen für Einrichtungen zum thermischen Schneiden (ISO 7287:2002)
Symboles graphiques pour équipements de coupage thermique (ISO 7287:2002)
Ta slovenski standard je istoveten z: EN ISO 7287:2002
ICS:
01.080.30 *UDILþQLVLPEROL]DXSRUDERY Graphical symbols for use on
ULVEDKGLDJUDPLKQDþUWLK mechanical engineering and
]HPOMHYLGLKYVWURMQLãWYXLQ construction drawings,
JUDGEHQLãWYXWHUYXVWUH]QL diagrams, plans, maps and in
WHKQLþQLSURL]YRGQL relevant technical product
GRNXPHQWDFLML documentation
25.160.30 Varilna oprema Welding equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 7287
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2002
ICS 01.080.20; 25.160.30 Supersedes EN ISO 7287:1995
English version
Graphical symbols for thermal cutting equipment (ISO
7287:2002)
Symboles graphiques pour équipements de coupage Bildzeichen für Einrichtungen zum thermischen Schneiden
thermique (ISO 7287:2002) (ISO 7287:2002)
This European Standard was approved by CEN on 15 February 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7287:2002 E
worldwide for CEN national Members.

CORRECTED  2002-05-15
Foreword
This document (ISO 7287:2002) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by August 2002, and conflicting national
standards shall be withdrawn at the latest by August 2002.
This document supersedes EN ISO 7287:1995.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the
United Kingdom.
Endorsement notice
The text of the International Standard ISO 7287:2002 has been approved by CEN as a
European Standard without any modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 81714-1 1999 Design of graphical symbols for EN ISO/IEC 11714-1 1999
use in the technical
documentation of products -
Part 1: Basic rules
INTERNATIONAL ISO
STANDARD 7287
NORME
Second edition
Deuxième édition
INTERNATIONALE
2002-02-15
Graphical symbols for thermal cutting
equipment
Symboles graphiques pour équipements de
coupage thermique
Bildzeichen für Einrichtungen zum
thermischen Schneiden
Reference number
Numéro de référence
ISO 7287:2002(E/F)
©
ISO 2002
ISO 7287:2002(E/F)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.

PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier peut
être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence autorisant
l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées acceptent de fait la
responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute responsabilité en la
matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation de
ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer le
Secrétariat central à l'adresse donnée ci-dessous.

©  ISO 2002
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction booklets,
technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are: that no
modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications offered for
sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in
the country of the requester.
La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels d'enseignement,
les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en application. Les conditions
d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la reproduction n'est pas autorisée
dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale est citée comme document source.
À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit
et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à l'adresse ci-après ou
du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland/Imprimé en Suisse

ii © ISO 2002 – All rights reserved/Tous droits réservés

ISO 7287:2002(E/F)
Contents Page
Foreword.vi
Introduction.ix
1 Scope.1
2 Normative references.1
3 Synopsis.2
Annex A (informative) Examples of the use of symbols on an operating board for a control system for
oxygen cutting machines.12
Alphabetical index .13

ISO 7287:2002(E/F)
Sommaire Page
Avant-propos.vii
Introduction .x
1 Domaine d'application.1
2 Références normatives.1
3 Tableau synoptique.2
Annexe A (informative) Exemples d'utilisation des symboles sur un tableau de commande de
machines d'oxycoupage .12
Index alphabétique .14

iv © ISO 2002 – All rights reserved/Tous droits réservés

ISO 7287:2002(E/F)
Inhalt Seite
Vorwort .viii
Einleitung.xi
1 Anwendungsbereich.1
2 Normative Verweisungen.1
3 Übersicht.2
Anhang A (informativ) Beispiele für die Anwendung der Bildzeichen auf einer Bedienungstafel eines
Schaltpultes an einer Brennschneidmaschine.12
Alphabetisches Stichwortverzeichnis.15

ISO 7287:2002(E/F)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International Stan-
dard requir
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.