EN 63005-1:2017

SLOVENSKI STANDARD
01-junij-2018
9LGHR]DSLVGRJRGNDRQHVUHþDKYFHVWQHPSURPHWXGHO2VQRYQH]DKWHYH
,(&
Event video data recorder for road vehicle accidents - Part 1: Basic requirements (IEC
63005-1:2017)
Ereignis Video Daten Recorder für Unfälle von Straßenfahrzeugen - Teil 1: Generelle
Anforderungen (IEC 63005-1:2017)
Enregistreurs de données vidéo pour l'identification et l'analyse des causes des
accidents des véhicules routiers - Partie 1: Exigences de bases (IEC 63005-1:2017)
Ta slovenski standard je istoveten z: EN 63005-1:2017
ICS:
33.160.40 Video sistemi Video systems
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 63005-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2017
ICS 33.160.40; 43.040.15
English Version
Event video data recorder for road vehicle accidents - Part 1:
Basic requirements
(IEC 63005-1:2017)
Enregistreurs de données vidéo pour l'identification et Ereignis Video Daten Recorder für Unfälle von
l'analyse des causes des accidents des véhicules routiers - Straßenfahrzeugen - Teil 1: Generelle Anforderungen
Partie 1: Exigences de bases (IEC 63005-1:2017)
(IEC 63005-1:2017)
This European Standard was approved by CENELEC on 2017-09-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 63005-1:2017 E
European foreword
The text of document 100/2839/CDV, future edition 1 of IEC 63005-1, prepared by Technical Area 17
"Multimedia systems and equipment for cars" of IEC/TC 100 "Audio, video and multimedia systems
and equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:

• latest date by which this document has (dop) 2018-06-13
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-09-13
standards conflicting with this
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 63005-1:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 62133 NOTE Harmonized as EN 62133.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 60068-2-1 2007 Environmental testing - Part 2-1: Tests - EN 60068-2-1 2007
Test A: Cold
IEC 60068-2-6 -  Environmental testing - Part 2-6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-27 2008 Environmental testing - Part 2-27: Tests - EN 60068-2-27 2009
Test Ea and guidance: Shock
ISO 12233 -  Photography - Electronic still picture imaging - -
- Resolution and spatial frequency
responses
IEC 63005-1 ®
Edition 1.0 2017-08
INTERNATIONAL
STANDARD
colour
inside
Event video data recorder for road vehicle accidents –

Part 1: Basic requirements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.160.40; 43.040.15 ISBN 978-2-8322-4626-9

– 2 – IEC 63005-1:2017 © IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Abbreviated terms and symbols . 8
5 Types of EVDR . 9
5.1 Classification by security level . 9
5.2 Classification by interoperability of functions . 9
6 Functional requirements . 10
6.1 Basic functions of the EVDR for road vehicle accidents . 10
6.2 Types of event data . 10
6.2.1 General . 10
6.2.2 Mandatory event data . 11
6.2.3 Optional event data . 12
6.3 Power supply unit and electrical safety . 13
6.3.1 Main power . 13
6.3.2 Fuse . 13
6.3.3 Protection from power failure . 13
7 General requirements . 13
7.1 Performance for storing acceleration . 13
7.2 Physical structure . 13
7.2.1 General . 13
7.2.2 Input interface . 14
7.3 Video camera performance . 14
7.3.1 Basic camera performance . 14
7.3.2 Camera FOV . 14
7.3.3 Vehicle registration plate detection performance . 14
7.4 Data storage and security . 14
7.5 Environmental reliability tests . 14
7.5.1 General . 14
7.5.2 Low-temperature operation test . 14
7.5.3 Operation at high-temperature . 14
7.5.4 High temperature storage test. 15
7.5.5 Vibration test . 15
7.5.6 Mechanical shock test . 15
Annex A (informative) Test setup for horizontal and vertical FOV . 16
Annex B (informative) Assignment of product identification number . 17
Annex C (normative) Registration plate identification of the camera . 18
Bibliography . 19

Figure 1 – Standard coordinate system of a vehicle equipped with the EVDR (body
fixed coordinates) . 9
Figure 2 – Basic functions of the EVDR for road vehicle accidents . 10
Figure A.1 – Test setup for horizontal and vertical FOV (front view) . 16

IEC 63005-1:2017 © IEC 2017 – 3 –
Figure A.2 – Test setup for horizontal and vertical FOV (plan view) . 16
Figure C.1 – License plate identification test using the ISO 12233 resolution chart . 18
Figure C.2 – ISO 12233 resolution chart . 18

Table 1 – Types of event data . 11
Table 2 – Mandatory event data items . 11
Table 3 – Optional event data items . 12
Table 4 – Operating voltage of EVDR under test . 13
Table 5 – Vibration condition . 15
Table 6 – Shock condition . 15
Table B.1 – Assignment of product identification number . 17

– 4 – IEC 63005-1:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
EVENT VIDEO DATA RECORDER FOR ROAD VEHICLE ACCIDENTS –

Part 1: Basic requirements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in w
...