Abstract

This part of IEC 60794 defines the test procedures used to establish uniform requirements for mechanical performance – Indoor simulated installation test. It applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors.
Throughout this document the wording “optical cable” can also include optical fibre units, microduct fibre units, etc.

Status
Published
Publication Date
12-Nov-2026
Current Stage
6060 - Document made available - Publishing
Start Date
13-Nov-2026
Due Date
24-Jul-2026
Completion Date
13-Nov-2026

Buy Documents

Standard

EN IEC 60794-1-127:2027

English language (13 pages)
Preview
Preview
e-Library read for
×1 day

EN IEC 60794-1-127:2026 is a CLC standard for optical fibre cables that defines the E27 indoor simulated installation test. It applies to cables used with telecommunication equipment and similar devices, including cables that combine optical fibres and electrical conductors. The standard tells manufacturers and test laboratories how to simulate indoor routing around corners and attachment points, and how to judge the cable’s optical and mechanical response after the test.

What does EN IEC 60794-1-127:2026 specify?

EN IEC 60794-1-127:2026 specifies a mechanical test method for indoor simulated installation of optical fibre cables. The purpose is to create uniform requirements for evaluating cable performance when the cable is routed in ways that can occur inside buildings, such as around tight corners and at fixing points.

EN IEC 60794-1-127:2026 is organized into Scope, Normative references, Terms and definitions, and Method E27. Method E27 is then divided into object, sample, apparatus, procedure, requirements, details to be specified, and details to be reported. Figures 1 and 2 show the simulation apparatus and the stapling and bending fixture.

What are the key requirements of EN IEC 60794-1-127:2026?

Test purpose and sample handling

  • EN IEC 60794-1-127:2026 uses Method E27 to simulate indoor installation where tight corners, attachment points and cable storage can occur. In practice, that means the method is aimed at cables that may see more severe handling than routine installation.
  • EN IEC 60794-1-127:2026 says the sample must be long enough for the procedure and the optical measurements, and it recommends a minimum sample length. This matters because the test must include the full routing path without forcing a shortened or unrealistic setup.
  • EN IEC 60794-1-127:2026 notes that the test is primarily intended for cables with bending loss insensitive fibres. For readers, that means the method is especially relevant when the design is expected to tolerate indoor bending and fixing.

Apparatus and test sequence

  • EN IEC 60794-1-127:2026 uses a substrate such as a wall stud or similar support, with fixtures that represent routing around a door, window or obstacle. The exact material and attachment approach are tied to local building practice, so the relevant specification has to match the intended installation environment.
  • EN IEC 60794-1-127:2026 runs the cable through a set of corner-bend, loaded-bend, mandrel-wrap and attachment-point conditions. In practice, the cable is exposed to a realistic sequence of indoor installation stresses rather than a single bend only.
  • EN IEC 60794-1-127:2026 allows optical monitoring during the test, and when that is used the fibres should stay connected throughout the procedure. This lets the tester watch attenuation changes while the cable is being stressed.

Evaluation and reporting

  • EN IEC 60794-1-127:2026 requires attenuation to be measured before the test when optical performance requirements apply, and measured again after the test. The important result is the change in attenuation relative to the initial value.
  • EN IEC 60794-1-127:2026 leaves acceptance criteria to the relevant specification, but it identifies typical failure modes such as cable damage, excessive attenuation change, or loss of continuity. That means the user must state the pass-fail rule before testing starts.
  • EN IEC 60794-1-127:2026 also asks the relevant specification and the test report to state the cable type, substrate, attachment method, residual load, temperature, acceptance criteria, results, and any deviations. This makes the test repeatable and lets another lab understand exactly how the result was obtained.

What terms does EN IEC 60794-1-127:2026 define?

EN IEC 60794-1-127:2026 uses the terms and definitions from IEC 60794-1-1, and it relies on a few key test-specific terms.

  • Method E27 - the indoor simulated installation test defined in this part.
  • Optical cable - a broad term that may also include optical fibre units and microduct fibre units.
  • Initial attenuation - the attenuation measured before the test and used as the baseline.
  • Change in attenuation - the difference between the post-test and pre-test attenuation values.
  • Rated residual load - the residual load specified for the cable and used in the loaded bend step.
  • F.D. - the cable fixing device shown in the apparatus figure, used to wind and weight the cable.
  • F2 - the load used in the loaded corner-bend condition.

Who uses EN IEC 60794-1-127:2026?

EN IEC 60794-1-127:2026 is used by cable manufacturers, test laboratories, product engineers, and quality teams working with indoor optical fibre cables. It helps them qualify a design, compare cable constructions, set product test conditions, and document attenuation or physical damage after simulated installation. It is also useful to buyers and specifiers who need a named method for indoor cable performance testing.

What changed in EN IEC 60794-1-127:2026 from the previous edition?

EN IEC 60794-1-127:2026 replaces Method E27 of the first edition of IEC 60794-1-21:2015. The document describes this as a technical revision and says the significant technical change is the addition of a new clause for reporting details. It also follows the new structure in which each test method is issued as an individual document in the IEC 60794-1-1xx series.

Which standards are used with EN IEC 60794-1-127:2026?

  • IEC 60794-1-1 - provides the general specification and the shared terms and definitions used in this part.
  • IEC 60794-1-2 - provides general guidance, general requirements, and the broader reference guide to optical fibre cable test methods.
  • IEC 60793-1-46 - provides the monitoring method for changes in attenuation when optical performance is tracked during the test.

What does the EN IEC 60794-1-127:2026 document contain?

EN IEC 60794-1-127:2026 contains the full E27 test method, including the stated object, sample requirements, apparatus description, procedure, and acceptance framework. It also includes what the relevant specification must define and what the test report must record. Figures 1 and 2 give the indoor installation simulation apparatus and the stapling and bending fixture used in the method.

Relations

Effective Date
09-Sep-2025
Effective Date
09-Sep-2025
Effective Date
27-Oct-2026
Effective Date
27-Oct-2026
Effective Date
27-Oct-2026
Effective Date
17-Nov-2026
Effective Date
17-Nov-2026
Effective Date
17-Nov-2026

Buy Documents

Standard

EN IEC 60794-1-127:2027

English language (13 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Intertek Slovenia

Intertek testing, inspection, and certification services in Slovenia.

UKAS Slovenia Verified

LNE (Laboratoire National de Métrologie et d'Essais)

French national laboratory for metrology and testing.

COFRAC France Verified

Sponsored listings

Frequently Asked Questions

EN IEC 60794-1-127:2026 is a standard published by CLC. Its full title is "Optical fibre cables - Part 1-127: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Indoor simulated installation test, method E27". This standard covers: This part of IEC 60794 defines the test procedures used to establish uniform requirements for mechanical performance – Indoor simulated installation test. It applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout this document the wording “optical cable” can also include optical fibre units, microduct fibre units, etc.

This part of IEC 60794 defines the test procedures used to establish uniform requirements for mechanical performance – Indoor simulated installation test. It applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout this document the wording “optical cable” can also include optical fibre units, microduct fibre units, etc.

EN IEC 60794-1-127:2026 is classified under the following ICS (International Classification for Standards) categories: 33.180.10 - Fibres and cables. The ICS classification helps identify the subject area and facilitates finding related standards.

EN IEC 60794-1-127:2026 has the following relationships with other standards: It is inter standard links to EN 60794-1-21:2015/A1:2020, EN 60794-1-21:2015, EN IEC 60794-1-2:2021, EN IEC 60793-1-46:2024, EN IEC 60794-1-1:2023, EN IEC 62148-1:2018, CLC/TS 50621:2016, EN 3745-505:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN IEC 60794-1-127:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2027
Nadomešča:
SIST EN 60794-1-21:2015
SIST EN 60794-1-21:2015/A1:2020
Optični kabli - 1-127. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanske preskusne metode - Preskus simulirane namestitve v
notranjih prostorih, metoda E27 (IEC 60794-1-127:2026)
Optical fibre cables - Part 1-127: Generic specification - Basic optical cable test
procedures - Mechanical tests methods - Indoor simulated installation test, method E27
(IEC 60794-1-127:2026)
Lichtwellenleiterkabel – Teil 1-127: Fachgrundspezifikation – Grundlegende
Prüfverfahren für Lichtwellenleiterkabel – Mechanische Prüfverfahren – Simulierter
Installationstest für Innenräume, Verfahren E27 (IEC 60794-1-127:2026)
Câbles à fibres optiques - Partie1-127: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Essai
d'installation simulée en intérieur, méthode E27 (IEC 60794-1-127:2026)
Ta slovenski standard je istoveten z: EN IEC 60794-1-127:2026
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60794-1-127

NORME EUROPÉENNE
EUROPÄISCHE NORM November 2026
ICS 33.180.10 Supersedes EN 60794-1-21:2015 (partially); EN 60794-1-
21:2015/A1:2020 (partially)
English Version
Optical fibre cables - Part 1-127: Generic specification - Basic
optical cable test procedures - Mechanical tests methods -
Indoor simulated installation test, method E27
(IEC 60794-1-127:2026)
Câbles à fibres optiques - Partie 1-127: Spécification Lichtwellenleiterkabel - Teil 1-127: Fachgrundspezifikation -
générique - Procédures fondamentales d'essais des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
optiques - Méthodes d'essais mécaniques - Essai Mechanische Prüfverfahren - Simulierter Installationstest
d'installation simulée en intérieur, méthode E27 für Innenräume, Verfahren E27
(IEC 60794-1-127:2026) (IEC 60794-1-127:2026)
This European Standard was approved by CENELEC on 2026-11-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60794-1-127:2026 E

European foreword
The text of document 86A/2697A/FDIS, future edition 1 of IEC 60794-1-127, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-127:2026.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2027-11-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2029-11-30
document have to be withdrawn
This document partially supersedes EN 60794-1-21:2015 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-127:2026 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60794-1-21 NOTE Approved as EN 60794-1-21
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60794-1-1 - Optical fibre cables - Part 1-1: Generic EN IEC 60794-1-1 -
specification - General
IEC 60794-1-2 - Optical fibre cables - Part 1-2: Generic EN IEC 60794-1-2 -
specification - Basic optical cable test
procedures - General guidance
IEC 60793-1-46 - Optical fibres - Part 1-46: Measurement EN IEC 60793-1-46 -
methods and test procedures - Monitoring
of changes in attenuation
IEC 60794-1-127 ®
Edition 1.0 2026-09
INTERNATIONAL
STANDARD
Optical fibre cables -
Part 1-127: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Indoor simulated installation test, method E27
ICS 33.180.10  ISBN 978-2-8327-1484-3

IEC 60794-1-127:2026-09(en)
IEC 60794-1-127:2026 © IEC 2026
CONTENTS
FOREWORD . 2
INTRODUCTION . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 5
5 Object . 5
6 Sample . 5
7 Apparatus . 6
8 Procedure . 7
9 Requirements . 8
10 Details to be specified . 8
11 Details to be reported . 8
Bibliography . 9

Figure 1 – Indoor installation simulation apparatus . 6
Figure 2 – Stapling and bending test fixture . 7

IEC 60794-1-127:2026 © IEC 2026
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Optical fibre cables -
Part 1-127: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Indoor simulated installation test, method E27

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users shou
...