Abstract

This part of IEC 60794 defines the test procedures used to establish uniform requirements for mechanical performance – Indoor simulated installation test. It applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors.
Throughout this document the wording “optical cable” can also include optical fibre units, microduct fibre units, etc.

Status
Published
Public Enquiry End Date
30-Apr-2025
Publication Date
18-Nov-2026
Technical Committee
MOC - Mobile Communications
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-Nov-2026
Due Date
22-Jan-2027
Completion Date
19-Nov-2026

Buy Documents

Standard

SIST EN IEC 60794-1-127:2027

English language (13 pages)
Preview
Preview
e-Library read for
×1 day

SIST EN IEC 60794-1-127:2027 is the Slovenian standard for the Method E27 indoor simulated installation test for optical fibre cables. It specifies how to simulate an indoor installation with tight corners, attachment points and cable storage so that mechanical performance can be checked for cables used with telecommunication equipment and similar devices.

This document is aimed at manufacturers, test laboratories, quality teams and specifiers that need a repeatable way to assess how an optical cable behaves during indoor routing and fixing.

What does SIST EN IEC 60794-1-127:2027 specify?

SIST EN IEC 60794-1-127:2027 defines the test procedure for indoor simulated installation, Method E27, as a mechanical test for optical fibre cables. It applies to optical fibre cables, including cables that combine optical fibres and electrical conductors, and the word “optical cable” also covers optical fibre units and microduct fibre units.

The document is organized into:

  • Clause 1 - Scope
  • Clause 2 - Normative references
  • Clause 3 - Terms and definitions
  • Clause 4 - Method E27, with Object, Sample, Apparatus, Procedure, Requirements, Details to be specified, and Details to be reported

Figures 1 and 2 show the test apparatus and the stapling and bending fixture used in the method.

What are the key requirements of SIST EN IEC 60794-1-127:2027?

SIST EN IEC 60794-1-127:2027 sets out one complete test method, from sample preparation to reporting. The practical point is that the cable, fixture and report must all match the relevant product specification.

Test purpose and applicability

Clause 4.1 says Method E27 simulates an indoor installation where tight corners, attachment points and cable storage can occur. It is intended to show a level of robustness more severe than traditional installation practices. In practice, this means the test is used to challenge cables that may be routed around obstacles or fixed to indoor structures.

Sample and apparatus

Clause 4.2 requires a cable length sufficient for the procedure and for the optical tests, with 100 m recommended as a minimum. Clause 4.3 describes the apparatus as a wall stud or other substrate long enough for the required wraps and attachment points. In practice, the lab needs a fixture that represents the intended building material and installation route.

Optical measurement

If optical performance requirements are specified, Clause 4.3 requires optical monitoring equipment according to IEC 60793-1-46, and Clause 4.4 requires initial attenuation to be measured before the test and again after the test. The change in attenuation is calculated against the initial value, so the result shows how much the installation sequence affected the fibre.

Procedure steps

Clause 4.4 prescribes a continuous sequence of conditions:

  • 14 corner bends at 90° with 1 mm radius under minimal manual tension
  • 1 corner bend at 90° with 2 kg load
  • 1 corner bend at 90° with rated residual load
  • 2 mandrel wraps on a 10 mm diameter mandrel
  • 30 attachment points as specified for the product

This sequence matters because it combines bending, loading and fixing in one test, which is closer to real indoor routing than a single mechanical action.

Fastening and attachment

Clause 4.4 allows fastening methods such as staples, adhesives and cable ties, provided they suit the substrate and local practice. If stapling is used, only crowned staples compatible with the cable size are allowed. This is important because the attachment method can itself damage the cable or change the attenuation result.

Acceptance and reporting

Clause 4.5 says the acceptance criteria must be stated in the relevant specification. Typical failure modes include physical damage, excessive attenuation change and loss of continuity. Clause 4.7 requires the test report to capture the test conditions, results and any deviations, so the outcome can be compared across laboratories and product files.

What terms does SIST EN IEC 60794-1-127:2027 define?

This document uses the terms and definitions from IEC 60794-1-1. Key terms in the method include:

  • Optical cable - the cable under test; here it can also mean optical fibre units and microduct fibre units.
  • Method E27 - the indoor simulated installation test described in Clause 4.
  • Substrate - the support material used for the apparatus, such as a wall stud.
  • Attachment point - a location where the cable is fixed during the installation simulation.
  • Rated residual load - the load condition used in the third bend step of the procedure.
  • Attenuation - the optical loss measured before and after the test to judge performance.
  • Optical monitoring equipment - equipment used to track optical performance during the test, according to IEC 60793-1-46.

Who uses SIST EN IEC 60794-1-127:2027?

SIST EN IEC 60794-1-127:2027 is used by optical fibre cable manufacturers, type-test laboratories, product qualification teams and quality managers. It is also relevant to buyers and specifiers who need to define an indoor cable test in product specifications. In practice, it helps these users agree on the test setup, the acceptance criteria and the information that must appear in the test report.

What changed in SIST EN IEC 60794-1-127:2027 from the previous edition?

SIST EN IEC 60794-1-127:2027 replaces Method E27 of IEC 60794-1-21:2015. The document states that this is a technical revision and that it follows the new structure and numbering system for optical fibre cable test methods. It also adds Clause 4.7, “Details to be reported”.

Which standards are used with SIST EN IEC 60794-1-127:2027?

The document normatively references:

  • IEC 60794-1-1 - provides the general generic specification terms and definitions used here
  • IEC 60794-1-2 - gives general guidance and the cross-reference framework for optical fibre cable test methods
  • IEC 60793-1-46 - provides the attenuation monitoring method used when optical performance is measured during the test

What does the SIST EN IEC 60794-1-127:2027 document contain?

The document contains the full Method E27 test method, including the object of the test, sample requirements, apparatus description, step-by-step procedure, acceptance requirements, and reporting items. It also includes Figure 1 for the indoor installation simulation apparatus and Figure 2 for the stapling and bending test fixture. The result is a ready-to-use method for qualification, verification and test reporting of indoor optical cable performance.

Relations

Effective Date
01-Jan-2027
Effective Date
01-Jan-2027
Effective Date
27-Oct-2026
Effective Date
27-Oct-2026
Effective Date
27-Oct-2026
Effective Date
17-Nov-2026
Effective Date
17-Nov-2026
Effective Date
17-Nov-2026

Buy Documents

Standard

SIST EN IEC 60794-1-127:2027

English language (13 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Intertek Slovenia

Intertek testing, inspection, and certification services in Slovenia.

UKAS Slovenia Verified

LNE (Laboratoire National de Métrologie et d'Essais)

French national laboratory for metrology and testing.

COFRAC France Verified

Sponsored listings

Frequently Asked Questions

SIST EN IEC 60794-1-127:2027 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Optical fibre cables - Part 1-127: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Indoor simulated installation test, method E27 (IEC 60794-1-127:2026)". This standard covers: This part of IEC 60794 defines the test procedures used to establish uniform requirements for mechanical performance – Indoor simulated installation test. It applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout this document the wording “optical cable” can also include optical fibre units, microduct fibre units, etc.

This part of IEC 60794 defines the test procedures used to establish uniform requirements for mechanical performance – Indoor simulated installation test. It applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout this document the wording “optical cable” can also include optical fibre units, microduct fibre units, etc.

SIST EN IEC 60794-1-127:2027 is classified under the following ICS (International Classification for Standards) categories: 33.180.10 - Fibres and cables. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN IEC 60794-1-127:2027 has the following relationships with other standards: It is inter standard links to SIST EN 60794-1-21:2015/A1:2020, SIST EN 60794-1-21:2015, SIST EN IEC 60793-1-46:2024, SIST EN IEC 60794-1-1:2023, SIST EN IEC 60794-1-2:2021, SIST EN IEC 62148-1:2018, SIST EN 3745-505:2018, SIST-TS CLC/TS 50621:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN IEC 60794-1-127:2027 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2027
Nadomešča:
SIST EN 60794-1-21:2015
SIST EN 60794-1-21:2015/A1:2020
Optični kabli - 1-127. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanske preskusne metode - Preskus simulirane namestitve v
notranjih prostorih, metoda E27 (IEC 60794-1-127:2026)
Optical fibre cables - Part 1-127: Generic specification - Basic optical cable test
procedures - Mechanical tests methods - Indoor simulated installation test, method E27
(IEC 60794-1-127:2026)
Lichtwellenleiterkabel – Teil 1-127: Fachgrundspezifikation – Grundlegende
Prüfverfahren für Lichtwellenleiterkabel – Mechanische Prüfverfahren – Simulierter
Installationstest für Innenräume, Verfahren E27 (IEC 60794-1-127:2026)
Câbles à fibres optiques - Partie1-127: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Essai
d'installation simulée en intérieur, méthode E27 (IEC 60794-1-127:2026)
Ta slovenski standard je istoveten z: EN IEC 60794-1-127:2026
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60794-1-127

NORME EUROPÉENNE
EUROPÄISCHE NORM November 2026
ICS 33.180.10 Supersedes EN 60794-1-21:2015 (partially); EN 60794-1-
21:2015/A1:2020 (partially)
English Version
Optical fibre cables - Part 1-127: Generic specification - Basic
optical cable test procedures - Mechanical tests methods -
Indoor simulated installation test, method E27
(IEC 60794-1-127:2026)
Câbles à fibres optiques - Partie 1-127: Spécification Lichtwellenleiterkabel - Teil 1-127: Fachgrundspezifikation -
générique - Procédures fondamentales d'essais des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
optiques - Méthodes d'essais mécaniques - Essai Mechanische Prüfverfahren - Simulierter Installationstest
d'installation simulée en intérieur, méthode E27 für Innenräume, Verfahren E27
(IEC 60794-1-127:2026) (IEC 60794-1-127:2026)
This European Standard was approved by CENELEC on 2026-11-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60794-1-127:2026 E

European foreword
The text of document 86A/2697A/FDIS, future edition 1 of IEC 60794-1-127, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-127:2026.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2027-11-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2029-11-30
document have to be withdrawn
This document partially supersedes EN 60794-1-21:2015 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-127:2026 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60794-1-21 NOTE Approved as EN 60794-1-21
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60794-1-1 - Optical fibre cables - Part 1-1: Generic EN IEC 60794-1-1 -
specification - General
IEC 60794-1-2 - Optical fibre cables - Part 1-2: Generic EN IEC 60794-1-2 -
specification - Basic optical cable test
procedures - General guidance
IEC 60793-1-46 - Optical fibres - Part 1-46: Measurement EN IEC 60793-1-46 -
methods and test procedures - Monitoring
of changes in attenuation
IEC 60794-1-127 ®
Edition 1.0 2026-09
INTERNATIONAL
STANDARD
Optical fibre cables -
Part 1-127: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Indoor simulated installation test, method E27
ICS 33.180.10  ISBN 978-2-8327-1484-3

IEC 60794-1-127:2026-09(en)
IEC 60794-1-127:2026 © IEC 2026
CONTENTS
FOREWORD . 2
INTRODUCTION . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 5
5 Object . 5
6 Sample . 5
7 Apparatus . 6
8 Procedure . 7
9 Requirements . 8
10 Details to be specified . 8
11 Details to be reported . 8
Bibliography . 9

Figure 1 – Indoor installation simulation apparatus . 6
Figure 2 – Stapling and bending test fixture . 7

IEC 60794-1-127:2026 © IEC 2026
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Optical fibre cables -
Part 1-127: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Indoor simulated installation test, method E27

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users shou
...