EN IEC 63005-2:2020

SLOVENSKI STANDARD
01-oktober-2020
Video zapis dogodka o nesrečah v cestnem prometu - 2. del: Preskusne metode za
vrednotenje delovanja osnovnih funkcij (IEC 63005-2:2019)
Event video data recorder for road vehicle accidents - Part 2: Test methods for evaluating
the performance of basic functions (IEC 63005-2:2019)
Video-Ereignisdatenschreiber für Straßenverkehrsunfälle - Teil 2: Prüfverfahren zur
Beurteilung des Betriebsverhaltens der grundlegenden Funktionen (IEC 63005-2:2019)
Enregistreurs de données vidéo pour l'identification et l'analyse des causes des
accidents des véhicules routiers - Partie 2: Méthodes d'essai pour l'évaluation des
performances des fonctions de base (IEC 63005-2:2019)
Ta slovenski standard je istoveten z: EN IEC 63005-2:2020
ICS:
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
33.160.40 Video sistemi Video systems
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 63005-2

NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2020
ICS 33.160.40; 43.040.15
English Version
Event video data recorder for road vehicle accidents - Part 2:
Test methods for evaluating the performance of basic functions
(IEC 63005-2:2019)
Enregistreurs de données vidéo pour l'identification et Video-Ereignisdatenschreiber für Straßenverkehrsunfälle -
l'analyse des causes des accidents des véhicules routiers - Teil 2: Prüfverfahren zur Beurteilung des Betriebsverhaltens
Partie 2: Méthodes d'essai pour l'évaluation des der grundlegenden Funktionen
performances des fonctions de base (IEC 63005-2:2019)
(IEC 63005-2:2019)
This European Standard was approved by CENELEC on 2020-01-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63005-2:2020 E

European foreword
The text of document 100/3314/FDIS, future edition 1 of IEC 63005-2, prepared by IEC/TC 100
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 63005-2:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-10-15
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-01-15
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 63005-2:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60068-2-27 NOTE Harmonized as EN 60068-2-27

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-1 2007 Environmental testing - Part 2-1: Tests - Test A: EN 60068-2 2007
Cold
IEC 60068-2-2 2007 Environmental testing - Part 2-2: Tests - Test B: EN 60068-2 2007
Dry heat
IEC 60068-2-6 - Environmental testing - Part 2-6: Tests - Test Fc: EN 60068-2 -
Vibration (sinusoidal)
IEC 63005-1 2017 Event video data recorder for road vehicle EN 63005 2017
accidents - Part 1: Basic requirements
ISO 12233 - Photography - Electronic still picture imaging - - -
Resolution and spatial frequency responses

IEC 63005-2 ®
Edition 1.0 2019-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Event video data recorder for road vehicle accidents –

Part 2: Test methods for evaluating performance of basic functions

Enregistreurs de données vidéo pour l'identification et l'analyse des causes

des accidents des véhicules routiers –

Partie 2: Méthodes d'essai pour l'évaluation des performances des fonctions

de base
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.160.40; 43.040.15 ISBN 978-2-8322-7648-8

– 2 – IEC 63005-2:2019 © IEC 2019
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviated terms . 6
5 General requirements for tests . 6
5.1 Test environment . 6
5.2 Simulation of accident events . 6
5.2.1 General . 6
5.2.2 Simulation device . 6
5.2.3 Applying a simulated accident event . 7
5.2.4 Simulating multiple collision events. 7
5.3 Evaluating performance of storing acceleration . 7
5.4 Test conditions . 7
5.5 Test order . 8
6 Evaluation of performance of the EVDR . 8
6.1 Evaluating the performance of power component . 8
6.1.1 Overvoltage test . 8
6.1.2 Protection from power failure and of event data recording time . 8
6.1.3 Prevention of vehicle battery from complete discharge (applicable to
continuously recording EVDR only) . 9
6.1.4 Tests on conducted emission, radiated emission, and radiated immunity . 9
6.2 Vehicle dynamics data and other performance . 9
6.3 Video camera performance . 10
6.3.1 Basic camera performance . 10
6.3.2 Camera field of view (FOV) . 10
6.3.3 Performance of registration plate identification . 10
6.4 Data storage and cyber security . 11
6.4.1 Preservation of data . 11
6.4.2 Integrity verification function . 11
6.5 Environmental reliability test . 14
6.5.1 Low-temperature operation test . 14
6.5.2 High-temperature operation test . 14
6.5.3 High-temperature storage test . 14
6.5.4 Vibration test . 14
6.5.5 Mechanical shock test . 15
7 Labelling . 15
7.1 Details to be displayed on the EVDR . 15
7.2 Instruction manual . 15
Bilbiography . 16

Figure 1 – An example of the triangular waveform caused by the acceleration-
generating equipment . 6

Table 1 – DC voltage for operation of the subject . 7
Table 2 – Order of test items and number of specimens . 8

IEC 63005-2:2019 © IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
EVENT VIDEO DATA RECORDER FOR ROAD VEHICLE ACCIDENTS –

Part 2: Test methods for evaluating performance of basic functions

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Inde
...