EN ISO 4254-9:2018
(Main)Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018)
Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018)
This document, intended to be used together with ISO 4254-1, specifies the safety requirements, and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, and seed drills with integrated and inseparable powered soil-working tools used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
This document is also applicable to seeding systems where components for seed deposition in the soil, for seed metering and for seed storage are distributed between two or more linked vehicles.
This document deals with all significant hazards (as listed in Annex A), hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions of misuse foreseeable by the manufacturer, excepting the hazards arising from
— electrostatic phenomena,
— external influences on electrical equipment,
— failure of energy supply,
— failure and/or malfunction of the control system,
— inadequate visibility from drivers'/operators' position,
— travelling functions (drive, braking, etc.),
— break down of parts rotating at high speed,
— equipment for loading seeds (and fertilizer), and
— moving parts for power transmission except for strength requirements for guards.
This document is not applicable to
— fertilizer distributors designed only for solid fertilizer application (covered in ISO 4254-8),
— maintenance or repairs carried out by professional service personnel, or
— to environmental hazards (except noise), and
— to seed drills which are manufactured before the date of its publication.
When requirements of this document are different from those which are stated in ISO 4254-1, the requirements of this document take precedence over the requirements of ISO 4254-1 for machines that have been designed and built according to the provisions of this document.
Landmaschinen - Sicherheit - Teil 9: Sägeräte (ISO 4254-9:2018)
Dieses Dokument ist in Verbindung mit ISO 4254-1 anzuwenden und enthält sicherheitstechnische Anforderungen und deren Überprüfung für Gestaltung und Konstruktion von angebauten, aufgesattelten, gezogenen oder selbstfahrenden Sägeräten, einschließlich der Säfunktion von kombinierten Sägeräten und Düngerstreuern, und von Sägeräten mit integrierten und untrennbaren kraftbetriebenen Bodenbearbeitungswerkzeugen, zur Verwendung in der Landwirtschaft. Außerdem enthält es Informationen über sicheres Arbeiten (einschließlich Restgefährdungen), die vom Hersteller zur Verfügung zu stellen sind.
Dieses Dokument gilt auch für Sägeräte, bei denen die Baugruppen für die Saatablage im Boden, Saatgutdosierung und Saatgutbevorratung auf zwei oder mehr miteinander verbundene Fahrzeuge verteilt sind.
Dieses Dokument behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse von Sägeräten, wenn sie wie beabsichtigt und entsprechend den vom Hersteller vorhersehbaren Bedingungen verwendet werden (siehe Anhang A), mit Ausnahme der Gefährdungen durch:
elektrostatische Vorgänge;
äußere Einflüsse auf elektrische Betriebsmittel;
Ausfall der Energieversorgung;
Ausfall, Fehlfunktion des Steuer- bzw. Regelsystems;
unangemessene Sicht von der Fahrer-/Bedienerposition;
Verfahren der Maschine (Fahren, Bremsen, usw.);
Bruch von mit hoher Geschwindigkeit rotierenden Teilen;
Geräte zum Laden von Saatgut (und Dünger), und
bewegte Teile der Kraftübertragung mit Ausnahme der Festigkeitsanforderungen für Schutzeinrichtungen.
Dieses Dokument gilt nicht für:
Düngerstreuer nur zur Ausbringung von Mineraldünger (erfasst von ISO 4254-8),
Reparatur und Wartung durch professionelle Servicefachkräfte, oder
Gefährdungen für die Umwelt (mit Ausnahme von Geräuschen), und
Sägeräte, die vor dem Datum der Veröffentlichung hergestellt wurden.
Wenn Anforderungen dieses Dokumentes von den Anforderungen in ISO 4254-1 abweichen, haben die Anforderungen dieses Dokumentes Vorrang gegenüber den Anforderungen von ISO 4254-1 für Maschinen, die nach den Bestimmungen dieses Dokumentes konzipiert und gebaut worden sind.
Matériel agricole - Sécurité - Partie 9: Semoirs (ISO 4254-9:2018)
Le présent document, destiné à être utilisé conjointement avec l'ISO 4254‑1, spécifie les exigences de sécurité et leur vérification pour la conception et la construction des semoirs portés, semi-portés, traînés ou automoteurs, y compris la fonction semis des semoirs combinant la distribution de semence et d'engrais et des semoirs avec outils de travail du sol animés, intégrés et indissociables, utilisés en agriculture. En outre, elle spécifie le type d'informations sur les pratiques d'utilisation sûre (y compris les risques résiduels) que le fabricant doit donner.
Le présent document s'applique également aux systèmes de semis dans lesquels les éléments permettant de déposer dans le sol, de doser et de stocker les semences sont répartis entre deux véhicules reliés ou plus.
Le présent document traite de tous les phénomènes dangereux, situations et événements dangereux significatifs (tels que listés dans l'Annexe A) applicables aux semoirs, lorsqu'ils sont utilisés normalement et des mauvais usages prévisibles par le fabricant, à l'exception des phénomènes dangereux engendrés par:
— des phénomènes électrostatiques;
— des influences extérieures sur l'équipement électrique;
— une défaillance de l'alimentation en énergie;
— des défaillances et/ou dysfonctionnements du système de commande;
— une visibilité inadéquate depuis le poste de conduite/la position de l'opérateur;
— les fonctions de déplacement (transmission, freinage, etc.);
— la rupture de pièces en rotation à grande vitesse;
— les dispositifs de chargement des semences (et engrais), et
— éléments mobiles de transmission de puissance, à l'exception des exigences de résistance des protecteurs.
Le présent document ne s'applique pas:
— aux distributeurs d'engrais conçus uniquement pour l'épandage d'engrais solides (couverts par l'ISO 4254‑8),
— à la maintenance ou aux réparations effectuées par du personnel professionnel, ou
— aux phénomènes dangereux liés à l'environnement (excepté le bruit) et
— aux semoirs fabriqués avant sa date de publication.
Lorsque des exigences du présent document diffèrent de celles de l'ISO 4254‑1, les exigences du présent document prévalent sur celles de l'ISO 4254‑1, pour les machines conçues et fabriquées conformément aux dispositions du présent document.
Kmetijski stroji - Varnost - 9. del: Sejalnice (ISO 4254-9:2018)
Ta del standarda ISO 4254, uporabljen skupaj s standardom ISO 4254-1, določa varnostne zahteve in njihovo preverjanje za načrtovanje ter konstrukcijo priklopnih, polpriklopnih, vlečenih ali samognanih sejalnic, vključno s sejalno funkcijo kombiniranih sejalnic in trosilnic, ki se uporabljajo v poljedelstvu in vrtnarstvu. Določa tudi vrsto informacij o varnih delovnih praksah (vključno z ostalimi tveganji), ki jih mora zagotoviti proizvajalec.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2019
1DGRPHãþD
SIST EN 14018:2006+A1:2010
Kmetijski stroji - Varnost - 9. del: Sejalnice (ISO 4254-9:2018)
Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018)
Landmaschinen - Sicherheit - Teil 9: Sägeräte (ISO 4254-9:2018)
Matériel agricole - Sécurité - Partie 9 : Semoirs (ISO 4254-9:2018)
Ta slovenski standard je istoveten z: EN ISO 4254-9:2018
ICS:
65.060.30 Sejalna in sadilna oprema Sowing and planting
equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 4254-9
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2018
EUROPÄISCHE NORM
ICS 65.060.30 Supersedes EN 14018:2005+A1:2009
English Version
Agricultural machinery - Safety - Part 9: Seed drills (ISO
4254-9:2018)
Matériel agricole - Sécurité - Partie 9: Semoirs (ISO Landmaschinen - Sicherheit - Teil 9: Sägeräte (ISO
4254-9:2018) 4254-9:2018)
This European Standard was approved by CEN on 17 August 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4254-9:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4
European foreword
This document (EN ISO 4254-9:2018) has been prepared by Technical Committee ISO/TC 23 "Tractors
and machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14018:2005+A1:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4254-9:2018 has been approved by CEN as EN ISO 4254-9:2018 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under a Commissions' standardization request “M/396
Mandate to CEN and CENELEC for Standardization in the field of machinery” to provide one voluntary
means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament
and of the Council of 17 May 2006 on machinery, amending Directive 95/16/EC (recast).
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I of Directive
2006/42/EC
Essential Requirements of Clause(s)/sub-clause(s) of this Remarks/Notes
Directive EN
Within the limits of the scope All normative clauses For relation of normative
all relevant essential clauses of this standard to
requirements are covered significant hazards/relevant
essential requirements of
2006/42/EC see informative
Annex A, List of significant
hazards, of this standard in
combination with Annex D
“Examples of significant
hazards, hazardous situations,
hazardous events and their
relation to the Essential
Requirements of the
Machinery Directive
2006/42/EC” of CEN Guide
(https://boss.cen.eu/ref/CEN_
414.pdf).
Compliance with EN ISO 4254-
9:2018 and the relevant
requirements of EN ISO 4254-
1:2013 is required to achieve
presumption of a conformity
with the relevant Essential
Requirements of Directive
2006/42/EC.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 4254-9
Third edition
2018-09
Agricultural machinery — Safety —
Part 9:
Seed drills
Matériel agricole — Sécurité —
Partie 9: Semoirs
Reference number
ISO 4254-9:2018(E)
©
ISO 2018
ISO 4254-9:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
ISO 4254-9:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Safety requirements, risk reduction and protective measures . 3
4.1 General . 3
4.2 Controls . 3
4.3 Swivelling and folding components . 5
4.4 Hoppers . 5
4.4.1 Cover. 5
4.4.2 Moving components . 5
4.5 Loading . 6
4.5.1 Operator access to loading locations without load . 6
4.5.2 Operator access to loading location with load . 6
4.5.3 Other boarding means .10
4.6 Single seed drills .10
4.7 Blower .10
4.8 Flow rate calibration system .10
4.9 Hitching and clearance zone .10
4.10 Noise reduction as a safety requirement .12
5 Verification of the safety requirements and protective/risk reduction measures .12
6 Information for use .12
6.1 Instruction handbook .12
6.2 Safety and instructional signs .13
Annex A (informative) List of significant hazards.14
Annex B (informative) Examples of seed drills .17
Bibliography .20
ISO 4254-9:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.