• Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

This document, intended to be used together with ISO 4254-1, specifies the safety requirements, and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, and seed drills with integrated and inseparable powered soil-working tools used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
This document is also applicable to seeding systems where components for seed deposition in the soil, for seed metering and for seed storage are distributed between two or more linked vehicles.
This document deals with all significant hazards (as listed in Annex A), hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions of misuse foreseeable by the manufacturer, excepting the hazards arising from
—          electrostatic phenomena,
—          external influences on electrical equipment,
—          failure of energy supply,
—          failure and/or malfunction of the control system,
—          inadequate visibility from drivers'/operators' position,
—          travelling functions (drive, braking, etc.),
—          break down of parts rotating at high speed,
—          equipment for loading seeds (and fertilizer), and
—          moving parts for power transmission except for strength requirements for guards.
This document is not applicable to
—          fertilizer distributors designed only for solid fertilizer application (covered in ISO 4254-8),
—          maintenance or repairs carried out by professional service personnel, or
—          to environmental hazards (except noise), and
—          to seed drills which are manufactured before the date of its publication.
When requirements of this document are different from those which are stated in ISO 4254-1, the requirements of this document take precedence over the requirements of ISO 4254-1 for machines that have been designed and built according to the provisions of this document.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 4254, applied together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function od combined seed and fertilizer drills, used in agriculture and horticulture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document, intended to be used together with ISO 4254-1, specifies the safety requirements, and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, and seed drills with integrated and inseparable powered soil-working tools used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. This document is also applicable to seeding systems where components for seed deposition in the soil, for seed metering and for seed storage are distributed between two or more linked vehicles. This document deals with all significant hazards (as listed in Annex A), hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions of misuse foreseeable by the manufacturer, excepting the hazards arising from — electrostatic phenomena, — external influences on electrical equipment, — failure of energy supply, — failure and/or malfunction of the control system, — inadequate visibility from drivers'/operators' position, — travelling functions (drive, braking, etc.), — break down of parts rotating at high speed, — equipment for loading seeds (and fertilizer), and — moving parts for power transmission except for strength requirements for guards. This document is not applicable to — fertilizer distributors designed only for solid fertilizer application (covered in ISO 4254-8), — maintenance or repairs carried out by professional service personnel, or — to environmental hazards (except noise), and — to seed drills which are manufactured before the date of its publication. When requirements of this document are different from those which are stated in ISO 4254-1, the requirements of this document take precedence over the requirements of ISO 4254-1 for machines that have been designed and built according to the provisions of this document.

  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off

ISO 17962:2015 specifies various means of minimizing the environmental effects of fan exhaust from pneumatic systems for vacuum-style sowing agricultural field equipment used for sowing coated seeds.
It is applicable to vacuum-style sowing systems where "dust off" (fugitive) material from seed coatings can mix with fan (blower) intake air and be exhausted into the atmosphere.
ISO 17962:2015 is not applicable to
-      conveyance systems between a central tank and remote meters where the air is exhausted at the remote meters, and
-      conveyance systems where the meter is at a central tank and the air is exhaust at a ground engaging opening device.
The design principles in this International Standard are not applicable to pneumatic equipment for sowing which was manufactured before the date of its publication.
NOTE          National or local requirements can apply which could be more stringent.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard (Technical Specification) specifies various means of minimizing the effects of fan exhaust from pneumatic systems for vacuum-style seeding (planting) agricultural field equipment used for sowing coated seeds. Application of design principles, use of calculations and testing methods are all acceptable means to minimize this fan exhaust.
It is applicable to vacuum-style planting (seeding) systems where "dust off" (fugitive) material from seed coatings can mix with fan (blower) intake air and be exhausted into the atmosphere.
This International Standard (Technical Specification) is not applicable to: ⎯ conveyance systems between a central tank and remote meters where the air is exhausted at the remote meters;
⎯ conveyance systems where the meter is at a central tank and the air is exhaust at a ground engaging opening device.
This International Standard (Technical Specification) is not applicable to pneumatic planting equipment which
was manufactured before the date of its publication.
NOTE National or local requirements can apply which could be more stringent.
NOTE Examples of systems are shown in Annex D.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 17962:2015 specifies various means of minimizing the environmental effects of fan exhaust from pneumatic systems for vacuum-style sowing agricultural field equipment used for sowing coated seeds. It is applicable to vacuum-style sowing systems where "dust off" (fugitive) material from seed coatings can mix with fan (blower) intake air and be exhausted into the atmosphere. ISO 17962:2015 is not applicable to - conveyance systems between a central tank and remote meters where the air is exhausted at the remote meters, and - conveyance systems where the meter is at a central tank and the air is exhaust at a ground engaging opening device. The design principles in this International Standard are not applicable to pneumatic equipment for sowing which was manufactured before the date of its publication. NOTE National or local requirements can apply which could be more stringent.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

This second edition cancels and replaces the first edition (1981). Specifies the working widths for equipment as a guideline for the manufacturers and users of these machines. Establishes a comllementary between the machines for sowing and planting (first operation) and the machines for subsequent operation. Tabulates the recommended working widths.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

This second edition cancels and replaces the first edition (1981). Specifies the working widths for equipment as a guideline for the manufacturers and users of these machines. Establishes a comllementary between the machines for sowing and planting (first operation) and the machines for subsequent operation. Tabulates the recommended working widths.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Specifies a standardized test method permitting reproducibility of tests when they are carried out in geographically remote areas and/or in different climatic conditions; the main objective being comparability for any one model of equipment. Annex A gives a programm of mandatory tests. Annex B includes optional tests. An example of test report is shown in annex C.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off

Specifies a standardized test method permitting reproducibility of test when they are carried out in geographically remote areas and/or different climatic conditions; the main objective being comparability for any one model equipment. Annex A gives performance of bench tests including six mandatory tests and an optional test. Annex B shows the device for measuring the depth of sowing. Annex C and D include the frequency of tests and a frequency histogram. Optional tests are given in annex E. An example of test report is show in annex F.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off

Specifies a method of testing potato planters to obtain comparable and reproducible measurements with regard to uniform placement of tubers and other aspects of performance of the machine. Applies to all types of potato planters. An annex contains an example of a test report.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

Establishes the dimensions of disks, with or without central hole. The table given the dimensions and fixing holes for sizes I to IV; the figure illustrates the various dimensions given and shows a section of the disk.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Establishes the dimensions of disks, having either plain or ball/roller bearings. The table given the dimensions and fixing holes for outside diameters from 300 to 350 mm; the figure illustrates the various dimensions given and shows a section of the disk.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, used in agriculture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard. It does not apply to: - fertilizer distributors designed only for solid fertilizer application (dealt with in EN 14017); - seed drills with integrated and inseparable powered soil working tools (see 3.2). This European Standard deals with all the significant hazards, hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from: - electrostatic phenomena; - external influences on electrical equipment; - failure of energy supply; - failure, malfunction of control system; - inadequate visibility from drivers/operators position; - travelling functions (drive, braking etc.); - break-up of parts rotating at high speed; - equipment for loading seeds (and fertilizer). It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13740-1:2003 and EN 13740-2:2003 for combined seed and solid fertilizer drills. This European Standard is not applicable to seed drills which are manufactured before the date of its publication as EN.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, used in agriculture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard.
It does not apply to:
-   fertilizer distributors designed only for solid fertilizer application (dealt with in EN 14017);
-   seed drills with integrated and inseparable powered soil working tools (see 3.2).
NOTE   Powered soil working tools are dealt with in EN 708:1996 and EN 708:1996/A1:2000.
This European Standard deals with all the significant hazards, hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from:
-   electrostatic phenomena;
-   external influences on electrical equipment;
-   failure of energy supply;
-   failure, malfunction of control system;
-   inadequate visibility from drivers/operators position;
-   travelling functions (drive, braking etc.);
-   break-up of parts rotating at high speed;
-   equipment for loading seeds (and fertilizer).
It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13740-1:2003 and EN 13740-2:2003 for combined seed and solid fertilizer drills.
This European Standard is not applicable to seed drills which are manufactured before the date of its

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies technical means of improving the degree of personal safety of operators and others. Applies additionally to ISO 4254-1.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

This European Standard, applied together with EN 1553, specifies the safety requirements and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, used in agriculture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this European Standard are different from those which are stated in EN 1553 the requirements of this European Standard take precedence over the requirements of EN 1553 for machines that have been designed and built according to the provisions of this European Standard.
It does not apply to:
   fertilizer distributors designed only for solid fertilizer application (dealt with in prEN 14017);
   seed drills with integrated and inseparable powered soil working tools (see 3.2).
NOTE   Powered soil working tools are dealt with in EN 708:1996 and EN 708:1996/A1:2000.
This European Standard deals with all the significant hazards, hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from:
   electrostatic phenomena;
   external influences on electrical equipment;
   failure of energy supply;
   failure, malfunction of control system;
   inadequate visibility from drivers/operators position;
   travelling functions (drive, braking etc.);
   break-up of parts rotating at high speed;
   equipment for loading seeds (and fertilizer).
It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13740-1:2003 and EN 13740-2:2003 for combined seed and solid fertilizer drills.
This European Standard is not applicable to seed drills which are manufactured before the date of its publication.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard, applied together with EN 1553, specifies the safety requirements and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, used in agriculture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this European Standard are different from those which are stated in EN 1553 the requirements of this European Standard take precedence over the requirements of EN 1553 for machines that have been designed and built according to the provisions of this European Standard.
It does not apply to:
   fertilizer distributors designed only for solid fertilizer application (dealt with in prEN 14017);
   seed drills with integrated and inseparable powered soil working tools (see 3.2).
NOTE   Powered soil working tools are dealt with in EN 708:1996 and EN 708:1996/A1:2000.
This European Standard deals with all the significant hazards, hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from:
   electrostatic phenomena;
   external influences on electrical equipment;
   failure of energy supply;
   failure, malfunction of control system;
   inadequate visibility from drivers/operators position;
   travelling functions (drive, braking etc.);
   break-up of parts rotating at high speed;
   equipment for loading seeds (and fertilizer).
It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13740-1:2003 and EN 13740-2:2003 for combined seed and solid fertilizer drills.
This European Standard is not applicable to seed drills which are manufactured before the date of its publication.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4254-9:2008, used together with ISO 4254-1, specifies the safety requirements, and their verification for design and construction, of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, used in agriculture and horticulture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of ISO 4254-9:2008 are different from those which are stated in ISO 4254-1 the requirements of ISO 4254-9:2008 take precedence over the requirements of ISO 4254-1. ISO 4254-9:2008 deals with all the significant hazards (as listed in Annex A), hazardous situations and events relevant to seed drills, used as intended and under the conditions foreseen by the manufacturer, excepting the hazards arising from external influences on electrical equipment, failure of energy supply, failure or malfunction of the control system, break-up of parts rotating at high speed, equipment for loading seeds (and fertilizer). ISO 4254-9:2008 is not applicable to seed drills with integrated and inseparable powered soil-working tools. It is not applicable to environmental hazards or electromagnetic compatibility; neither is it applicable to hazards related to maintenance or repairs carried out by professional service personnel. It is not applicable to machines which are manufactured before the date of its publication.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    19 pages
    French language
    sale 15% off

Specifies technical means of improving the degree of personal safety of operators and others. Applies additionally to ISO 4254-1.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off