65.060.25 - Equipment for storage, preparation and distribution of fertilizers
ICS 65.060.25 Details
Equipment for storage, preparation and distribution of fertilizers
Lagerung, Aufbereitung und Verteilung von Dungemitteln
Matériel pour le stockage, la préparation et la distribution des engrais
Oprema za skladiščenje, pripravo in razdeljevanje gnojiv
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 65.060.25 - Equipment for storage, preparation and distribution of fertilizers
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document, to be used together with EN ISO 4254-1, specifies the safety requirements and their verification for the design and construction of semi-mounted, trailed and self-propelled slurry tankers, including their spreading or injecting devices, intended for spreading or injecting slurry which are operated by either pneumatic or mechanical power. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN ISO 4254-1, the requirements of this document take precedence over the requirements of EN ISO 4254-1 for machines that have been designed and built according the provisions of this document.
This document, taken together with EN ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to slurry tankers, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Table A.1), excepting the hazards related to road safety (e.g. steering, braking).
Environmental aspects have not been considered in this document.
This document is not applicable to slurry tankers which are manufactured before the date of its publication as EN.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies specific safety requirements and their verification for the design and construction of all semi-mounted, trailed and self-propelled slurry tankers, including their spreading or injecting devices, intended for spreading or injecting slurry which are operated by either pneumatic or mechanical power.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 4254-8:2018, intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application in agriculture and to be used by one operator only, e.g. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors, as well as solid fertilizer distributors driven by an auxiliary engine. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
ISO 4254-8:2018 deals with all the significant hazards (as listed in Annex A), hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4), excepting the hazards arising from:
- inadequate lighting of working area;
- inadequate visibility from drivers/operators position;
- inadequate seating;
- travelling functions (drive, braking etc.);
- rolling over;
- equipment for loading fertilizer into the machine;
- an auxiliary engine;
- moving parts for power transmission except for strength requirements for guards.
ISO 4254-8:2018 is neither applicable to maintenance or repairs carried out by professional service personnel nor to environmental hazards (except noise).
ISO 4254-8:2018 is not applicable to the following:
- combined seed and fertilizer drills which create a soil trench and deposit fertilizer in said trench;
- machines for distributing granulated pesticides;
- pedestrian controlled distributors;
- knapsack distributors.
ISO 4254-8:2018 is not applicable to solid fertilizer distributors which are manufactured before the date of its publication.
When requirements of this document are different from those which are stated in ISO 4254‑1, the requirements of this document take precedence over the requirements of ISO 4254‑1 for machines that have been designed and built according to the provisions of this document.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO 4254, applied together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer
application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used in agriculture, horticulture and in forestry. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 4254-8:2018, intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application in agriculture and to be used by one operator only, e.g. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors, as well as solid fertilizer distributors driven by an auxiliary engine. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. ISO 4254-8:2018 deals with all the significant hazards (as listed in Annex A), hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4), excepting the hazards arising from: - inadequate lighting of working area; - inadequate visibility from drivers/operators position; - inadequate seating; - travelling functions (drive, braking etc.); - rolling over; - equipment for loading fertilizer into the machine; - an auxiliary engine; - moving parts for power transmission except for strength requirements for guards. ISO 4254-8:2018 is neither applicable to maintenance or repairs carried out by professional service personnel nor to environmental hazards (except noise). ISO 4254-8:2018 is not applicable to the following: - combined seed and fertilizer drills which create a soil trench and deposit fertilizer in said trench; - machines for distributing granulated pesticides; - pedestrian controlled distributors; - knapsack distributors. ISO 4254-8:2018 is not applicable to solid fertilizer distributors which are manufactured before the date of its publication. When requirements of this document are different from those which are stated in ISO 4254‑1, the requirements of this document take precedence over the requirements of ISO 4254‑1 for machines that have been designed and built according to the provisions of this document.
- Standard16 pagesEnglish languagesale 15% off
- Standard17 pagesFrench languagesale 15% off
ISO 1401:2016 specifies requirements for three types of flexible rubber hose for pressure spraying of agricultural chemicals and/or fertilizer products within a temperature range of ?10 °C to +60 °C.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 1401:2016 specifies requirements for three types of flexible rubber hose for pressure spraying of agricultural chemicals and/or fertilizer products within a temperature range of ?10 °C to +60 °C.
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
This European Standard, to be used together with EN ISO 4254-1, specifies the safety requirements and their verification for the design and construction of self-propelled, mounted, semi-mounted and trailed manure spreaders, provided with vertical or horizontal axes rotors rear spreader device or with vertical axes disc rear spreader device. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN ISO 4254-1, the requirements of this document take precedence over the requirements of EN ISO 4254-1 for machines that have been designed and built according the provisions of this document.
This European Standard, taken together with EN ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to manure spreaders, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Table 1), excepting the hazards arising from:
- vibrations of self-propelled machinery;
- travelling function of self-propelled machinery;
- overturning in regard to the protection of the operator at the driving station of a self-propelled machine;
- hazards related to conveying devices other than those defined in 3.3.1 and 3.3.2, for example load push/push-off device.
NOTE 1 Regarding roll-over protection for self-propelled agricultural machinery, see EN ISO 16231-1.
NOTE 2 This European Standard is neither applicable to environmental hazards nor to road safety. Environmental aspects are dealt with in EN 13080.
This European Standard does not apply to manure spreaders with laterally mounted spreading device as defined in 3.6.
This European Standard is not applicable to manure spreaders which are manufactured before the date of publication of this document by CEN.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard, to be used together with EN ISO 4254-1, specifies the safety requirements and their verification for the design and construction of self-propelled, mounted, semi-mounted and trailed manure spreaders, provided with vertical or horizontal axes rotors rear spreader device or with vertical axes disc rear spreader device. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. When requirements of this document are different from those which are stated in EN ISO 4254-1, the requirements of this document take precedence over the requirements of EN ISO 4254-1 for machines that have been designed and built according the provisions of this document. This European Standard, taken together with EN ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to manure spreaders, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Table 1), excepting the hazards arising from: - vibrations of self-propelled machinery; - travelling function of self-propelled machinery; - overturning in regard to the protection of the operator at the driving station of a self-propelled machine; - hazards related to conveying devices other than those defined in 3.3.1 and 3.3.2, for example load push/push-off device.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies methods to test mounted, trailed and self-propelled broadcasters and full width solid fertilizer distributors used in agriculture and horticulture.
This European Standard does not apply to machines which are:
combined grain and fertilizer drills; or
equipment for distributing granulated pesticides; or
solid fertilizer line-distributors (which are dealt with in prEN 13740-1 and in prEN 13740-2).
If the term 'machine' is used it shall cover both full width distributors and broadcasters, except in the definitions.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 16119-2:2013 specifies requirements and the means for their verification for the design and performance of horizontal boom sprayers, as defined in 3.1, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer.
It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. It does not cover safety aspects (see ISO 4254-6).
ISO 16119-2:2013 is not applicable to sprayers manufactured before the date of its publication.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 16119-3:2013 specifies requirements and the means for their verification for the design and performance of sprayers for bush, tree and similar crops, as defined in 3.1, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer.It is not applicable to human-mounted sprayers for bushes or trees.
It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. It does not cover safety aspects (see ISO 4254-6).
ISO 16119-3:2013 is not applicable to sprayers manufactured before the date of its publication.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 16119-1:2013 specifies general requirements for the design and performance of sprayers, as defined in ISO 5681, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It also specifies the requirements for identification of the sprayer and certain of its components, and the minimum content of the instruction handbook.
It is intended to be used with each of the other parts of ISO 16119, which give requirements specific to particular types of sprayers (see Annex A). ISO 16119-1:2013 is applicable to all types of sprayers used in agriculture, horticulture, forestry and other areas, except knapsack sprayers. It does not cover safety aspects (see ISO 4254-6).
NOTE Knapsack sprayers are covered by ISO 19932, which deals with safety as well as environmental aspects.
ISO 16119-1:2013 is not applicable to sprayers manufactured before the date of its publication.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO 16119 specifies general requirements for the design and performance of sprayers, as defined in ISO 5681, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It also specifies the requirements for identification of the sprayer and certain of its components, and the minimum content of the instruction handbook. It is intended to be used with each of the other parts of ISO 16119, which give requirements specific to particular types of sprayers (see Annex A). This part of ISO 16119 is applicable to all types of sprayers used in agriculture, horticulture, forestry and other areas, except knapsack sprayers. It does not cover safety aspects (see ISO 4254-6). NOTE Knapsack sprayers are covered by ISO 19932, which deals with safety as well as environmental aspects. This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO 16119 specifies requirements and the means for their verification for the design and performance of sprayers for bush and tree crops, as defined in 3.1, and similar crops, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It is not applicable to human-mounted sprayers for bushes or trees. It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119-1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119-1 for machines within the scope of this part of ISO 16119. This part of ISO 16119 does not cover safety aspects (see ISO 4254-6). This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO 16119 specifies requirements and the means for their verification for the design and performance of horizontal boom sprayers, as defined in 3.1, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119-1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119-1 for machines within the scope of this part of ISO 16119. It does not cover safety aspects (see ISO 4254-6). This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies methods to test mounted, trailed and self-propelled broadcasters and full width solid fertilizer distributors used in agriculture and horticulture.
This European Standard does not apply to machines which are:
- combined grain and fertilizer drills; or
- equipment for distributing granulated pesticides; or
- solid fertilizer line-distributors (which are dealt with in EN 13740-1:2003 and in EN 13740-2:2003).
If the term ‘machine’ is used it covers both full width distributors and broadcasters, except in the case of definitions in Part 1.
Two different methods are described in this European Standard to carry out the evaluation test: a transverse test and a rotating test. The rotating test is mainly adapted to centrifugal spreaders.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the environmental protection for design and construction of mounted, trailed and self-propelled full width solid fertilizer distributors and solid fertilizer broadcasters used in agriculture and horticulture. It also gives the requirements for the minimum content of the instruction handbook.
The standard does not apply to machines which are:
a) combined grain and fertilizer drills; or
b) equipment for distributing granulated pesticides; or
c) solid fertilizer line-distributors (which are dealt with in EN 13740-1:2003 and in EN 13740-2:2003).
Personal safety aspects have not been considered in this standard; they are dealt with in EN 14017:2005+A2:2009.
If the term ‘machine’ is used it covers both full width distributors and broadcasters, except in the definitions.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the environmental protection for design and construction of
mounted, trailed and self-propelled full width solid fertilizer distributors and solid fertilizer broadcasters used in
agriculture and horticulture. It also gives the requirements for the minimum content of the instruction handbook.
The standard does not apply to machines which are:
a) combined grain and fertilizer drills; or
b) equipment for distributing granulated pesticides; or
c) solid fertilizer line-distributors (which are dealt with in EN 13740-1:2003 and in EN 13740-2:2003).
Personal safety aspects have not been considered in this standard; they are dealt with in EN 14017+A1:2008.
If the term ‘machine’ is used it covers both full width distributors and broadcasters, except in the definitions.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies methods to test mounted, trailed and self-propelled broadcasters and full width solid fertilizer distributors used in agriculture and horticulture.
This European Standard does not apply to machines which are:
combined grain and fertilizer drills; or
equipment for distributing granulated pesticides; or
solid fertilizer line-distributors (which are dealt with in prEN 13740-1 and in prEN 13740-2).
If the term 'machine' is used it shall cover both full width distributors and broadcasters, except in the definitions.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard specifies requirements for the environmental preservation and their verification for design and construction of manure spreaders for spreading manure in agriculture and horticulture. It specifies requirements for the transverse and longitudinal spreading characteristics such as acceptable working widths, steady flow, the stretch within the tolerance zone and the coefficient of variation for the longitudinal spreading. These requirements are limited to the evaluation of spreaders tested with manure as specified in table A.1. This standard is not applicable to manure band-spreaders or to sludge spreaders.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This Standard specifies methods to test mounted, trailed and self-propelled solid fertilizer in lines distributors including such machines attached to a basic machine, used in agriculture and horticulture. The standard does not apply to machines which are: - combined grain and fertilizer drills or; - equipment for distributing liquid or granulated pesticides. NOTE: The standard is also applicable to drilling machines if it is stated by the machine manufacturer that the machine is suitable for fertilizer application. If both drilling and spreading in lines distributors are meant, the term machine will cover them both.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This Standard specifies requirements for the environmental safety for design and construction of mounted, trailed and self-propelled solid fertilizer distributors in lines, including such machines attached to a basic machine, used in agriculture and horticulture. It also gives the requirements for the minimum content of the instruction handbook. NOTE The standard is also applicable to drilling machines if it is stated by the machine manufacturer that the machine is suitable for fertilizer application.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the environmental preservation and their verification for design and construction of slurry tankers for broadcasting and band spreading of slurry in agriculture and horticulture. It specifies requirements for the transverse and longitudinal spreading characteristics such as acceptable working widths, steady flow and the stretch within the tolerance zone. These requirements are limited to tests with slurry as described in Annex A, table A.1.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This Standard specifies requirements for the environmental safety for design and construction of mounted, trailed and self-propelled solid fertilizer distributors in lines, including such machines attached to a basic machine, used in agriculture and horticulture. It also gives the requirements for the minimum content of the instruction handbook. NOTE The standard is also applicable to drilling machines if it is stated by the machine manufacturer that the machine is suitable for fertilizer application.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This Standard specifies methods to test mounted, trailed and self-propelled solid fertilizer in lines distributors including such machines attached to a basic machine, used in agriculture and horticulture. The standard does not apply to machines which are: - combined grain and fertilizer drills or; - equipment for distributing liquid or granulated pesticides. NOTE: The standard is also applicable to drilling machines if it is stated by the machine manufacturer that the machine is suitable for fertilizer application. If both drilling and spreading in lines distributors are meant, the term machine will cover them both.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the environmental preservation and their verification for design and construction of slurry tankers for broadcasting and band spreading of slurry in agriculture and horticulture. It specifies requirements for the transverse and longitudinal spreading characteristics such as acceptable working widths, steady flow and the stretch within the tolerance zone. These requirements are limited to tests with slurry as described in Annex A, table A.1.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard specifies requirements for the environmental preservation and their verification for design and construction of manure spreaders for spreading manure in agriculture and horticulture. It specifies requirements for the transverse and longitudinal spreading characteristics such as acceptable working widths, steady flow, the stretch within the tolerance zone and the coefficient of variation for the longitudinal spreading. These requirements are limited to the evaluation of spreaders tested with manure as specified in table A.1. This standard is not applicable to manure band-spreaders or to sludge spreaders.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
Specifies a test method for fertilizer distributors in lines, including distributors attached to a basic machine. Equipment designed for distributing microgranular pesticides or herbicides is excluded. Annex A tabulates a program of primary (mandatory) tests; annex B gives the determination of physical properties of fertiliziers; annex C describes optional tests; annex D contains an example of a test report.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard13 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This seciond cancels and replaces the first edition (1982). Specifies a test method for distribution of solid fertilizers. Equiment designed for distributing microgranular pesticides or herbicides ist excluded. Tabulates a program of mobile tests. Annex A gives the determination of physical properties of fertilizers; annex B describes optional tests; annex C contains an example of a test report.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard14 pagesEnglish languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
This second edition cancels and replaces the first edition (1981). Specifies the working widths for equipment as a guideline for the manufacturers and users of these machines. Establishes a comllementary between the machines for sowing and planting (first operation) and the machines for subsequent operation. Tabulates the recommended working widths.
- Standard4 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
This second edition cancels and replaces the first edition (1981). Specifies the working widths for equipment as a guideline for the manufacturers and users of these machines. Establishes a comllementary between the machines for sowing and planting (first operation) and the machines for subsequent operation. Tabulates the recommended working widths.
- Standard4 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
This seciond cancels and replaces the first edition (1982). Specifies a test method for distribution of solid fertilizers. Equiment designed for distributing microgranular pesticides or herbicides ist excluded. Tabulates a program of mobile tests. Annex A gives the determination of physical properties of fertilizers; annex B describes optional tests; annex C contains an example of a test report.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard14 pagesEnglish languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
Specifies a test method for fertilizer distributors in lines, including distributors attached to a basic machine. Equipment designed for distributing microgranular pesticides or herbicides is excluded. Annex A tabulates a program of primary (mandatory) tests; annex B gives the determination of physical properties of fertiliziers; annex C describes optional tests; annex D contains an example of a test report.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard13 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This European Standard specifies the road safety requirements for self-propelled agricultural machines.
It applies to self-propelled machines exceeding a maximum design speed of 6 km/h running on tyres or endless tracks and falling within the scope of Directive 2006/42/EC and which may be required to travel occasionally on the public road network.
This document is not applicable to self-propelled agricultural machines consisting of machines mounted on a vehicle chassis covered by Directive 2007/46/EC.
This document is not applicable to self-propelled agricultural machines which are manufactured before the date of publication of this document by CEN.
NOTE 1 For the purpose of this European Standard a public road shall be defined as a road to which vehicles have access and on which either the machines and/or operator must be licensed. Industrial sites, work sites and agricultural and forestry land shall not be considered as a public road for this purpose.
NOTE 2 Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles
- Draft6 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies safety requirements and their verification for design and construction of mounted and trailed manure spreaders, provided with vertical or horizontal axes rotors rear spreader device or with horizontal or vertical axes disc lateral spreader device. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer (the residual risks are enclosed).
- Draft21 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies safety requirements and their verification for design and construction of mounted and trailed manure spreaders, provided with vertical or horizontal axes rotors rear spreader device or with horizontal or vertical axes disc lateral spreader device. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer (the residual risks are enclosed).
- Draft21 pagesEnglish languagesale 10% offe-Library read for1 day
This amendment will only deal with § 5.3.2.1 "Protection against unintentional contact with distributing components" of EN 14017:2005 in order to answer to the possible safe guard from Italy (TC 144 N 1015 refers)
- Draft4 pagesEnglish languagesale 10% offe-Library read for1 day
This amendment will only deal with § 5.3.2.1 "Protection against unintentional contact with distributing components" of EN 14017:2005 in order to answer to the possible safe guard from Italy (TC 144 N 1015 refers)
- Draft4 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies specific safety requirements and their verification for the design and construction of all semi-mounted, trailed and self-propelled slurry tankers, including their spreading or injecting devices, intended for spreading or injecting slurry which are operated by either pneumatic or mechanical power. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with. Environmental aspects have not been considered in this standard. This standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies specific safety requirements and their verification for the design and construction of all semi-mounted, trailed and self-propelled slurry tankers, including their spreading or injecting devices, intended for spreading or injecting slurry which are operated by either pneumatic or mechanical power.
NOTE Braking requirements are not included in this standard. These will be studied during its revision depending on the development of European regulations.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with.
Environmental aspects have not been considered in this standard.
This standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used in agriculture, horticulture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard.
It does not apply to:
- combined seed and fertilizer drills;
- machines for distributing granulated pesticides;
- pedestrian controlled distributors;
- knapsack distributors.
This European Standard deals with all the significant hazards, hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from:
- inadequate lighting of moving/working area;
- inadequate visibility from drivers/operators position;
- inadequate seating;
- travelling functions (drive, braking etc.);
- rolling over;
- equipment for loading fertilizer into the machine;
- an auxiliary engine.
It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13739-1:2003, EN 13739-2:2003, EN 13740-1:2003 and EN 13740-2:2003.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used in agriculture, horticulture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard.
It does not apply to:
- combined seed and fertilizer drills;
- machines for distributing granulated pesticides;
- pedestrian controlled distributors;
- knapsack distributors.
This European Standard deals with all the significant hazards, hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from:
- inadequate lighting of moving/working area;
- inadequate visibility from drivers/operators position;
- inadequate seating;
- travelling functions (drive, braking etc.);
- rolling over;
- equipment for loading fertilizer into the machine;
- an auxiliary engine.
It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13739-1:2003, EN 13739-2:2003, EN 13740-1:2003 and EN 13740-2:2003.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies safety requirements and their verification for the design and construction of all types of manure spreaders, including self-propelled machines, whether the spreading is made to the rear or laterally.
It describes methods for elimination or reduction of hazards which need specific requirements for manure spreaders. It does not deal with general hazards particularly general hazards related to mobility, including those specific to self-propelled machines. These aspects will be dealt with in another standard produced by CEN/TC 14 (see introduction).
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
The list of significant hazards dealt with in this standard is given in annex A. Annex A also indicates the hazards which have not been dealt with.
Environmental aspects have not been considered in this standard.
This standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies methods to test mounted, trailed and self-propelled broadcasters and full width solid fertilizer distributors used in agriculture and horticulture.
This European Standard does not apply to machines which are:
combined grain and fertilizer drills; or
equipment for distributing granulated pesticides; or
solid fertilizer line-distributors (which are dealt with in prEN 13740-1 and in prEN 13740-2).
If the term 'machine' is used it shall cover both full width distributors and broadcasters, except in the definitions.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies safety requirements and their verification for the design and construction of all types of manure spreaders, including self-propelled machines, whether the spreading is made to the rear or laterally.
It describes methods for elimination or reduction of hazards which need specific requirements for manure spreaders. It does not deal with general hazards particularly general hazards related to mobility, including those specific to self-propelled machines. These aspects will be dealt with in another standard produced by CEN/TC 14 (see introduction).
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
The list of significant hazards dealt with in this standard is given in annex A. Annex A also indicates the hazards which have not been dealt with.
Environmental aspects have not been considered in this standard.
This standard applies primarily to machines which are manufactured after the date of issue of the standard.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This part provides special guidelines to be followed when designing applicators for liquid ammonia for use with tractors and machinery. It should be read in conjunction with ISO 4254-1. Contains definitions and special technical requirements.
- Standard6 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
Specifies technical means of improving the degree of personal safety of operators and others. Applies additionally to ISO 4254-1.
- Standard6 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
This part of EN 12761 specifies requirements and methods for their verification for design and performances of low crop sprayers with respect to minimizing the risk of environmental contamination. This part applies in connection with EN 12761-1 which contains general guidelines for agricultural sprayers.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 12761 specifies requirements and methods for their verification for design and performances of air-assisted sprayers which respect to minimizing the risk of environmental contamination. This part applies in connection wit EN 12761-1 and 12761-2 which contain general guidelines for agricultural sprayers and requirements for low crop sprayers.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day