EN ISO 18541-6:2018

SLOVENSKI STANDARD
01-maj-2018
Cestna vozila - Standardizirani dostop do informacij o popravilih in vzdrževanju
avtomobilov (RMI) - 6. del: Posebni primeri uporabe RMI in zahteve za vozila
kategorije L (ISO 18541-6:2018)
Road vehicles - Standardized access to automotive repair and maintenance information
(RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-
6:2018)
Straßenfahrzeuge - Standardisierter Zugang zur Reparatur und Wartung (RMI) - Teil 6:
Spezifische RMI Anwendungsfälle und Anfoderungen fü L-Kategorie Fahrzeuge (ISO
18541-6:2018)
Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et
à la maintenance pour l'automobile (RMI) - Partie 6: Exigences et cas d'usage RMI
spécifiques aux véhicules de catégorie L (ISO 18541-6:2018)
Ta slovenski standard je istoveten z: EN ISO 18541-6:2018
ICS:
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
43.180 'LDJQRVWLþQDYGUåHYDOQDLQ Diagnostic, maintenance and
SUHVNXVQDRSUHPD test equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 18541-6
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2018
EUROPÄISCHE NORM
ICS 43.040.15; 43.180
English Version
Road vehicles - Standardized access to automotive repair
and maintenance information (RMI) - Part 6: L-Category
vehicle specific RMI use cases and requirements (ISO
18541-6:2018)
Véhicules routiers - Normalisation de l'accès aux Straßenfahrzeuge - Standardisierter Zugang zur
informations relatives à la réparation et à la Reparatur und Wartungsinformationen (RMI) - Teil 6:
maintenance pour l'automobile (RMI) - Partie 6: Spezifische RMI Anwendungsfälle und Anforderungen
Exigences et cas d'usage RMI spécifiques aux véhicules für L-Kategorie Fahrzeuge (ISO 18541-6:2018)
de catégorie L (ISO 18541-6:2018)
This European Standard was approved by CEN on 14 December 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18541-6:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 18541-6:2018) has been prepared by Technical Committee ISO/TC 22 "Road
vehicles" in collaboration with Technical Committee CEN/TC 301 “Road vehicles”, the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2018, and conflicting national standards shall
be withdrawn at the latest by August 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18541-6:2018 has been approved by CEN as EN ISO 18541-6:2018 without any
modification.
INTERNATIONAL ISO
STANDARD 18541-6
First edition
2018-02
Road vehicles — Standardized access
to automotive repair and maintenance
information (RMI) —
Part 6:
L-Category vehicle specific RMI use
cases and requirements
Véhicules routiers — Normalisation de l'accès aux informations
relatives à la réparation et à la maintenance pour l'automobile
(RMI) —
Partie 6: Exigences et cas d'usage RMI spécifiques aux véhicules de
catégorie L
Reference number
ISO 18541-6:2018(E)
©
ISO 2018
ISO 18541-6:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 18541-6:2018(E)
Contents Page
Foreword .viii
Introduction .ix
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 8
4 Document overview and structure .10
5 General information .11
5.1 Access to vehicle RMI .11
5.2 Standardized access to RMI benefit examples .12
5.2.1 Independent operators .12
5.2.2 Vehicle manufacturers .13
5.3 L-Category and subcategories .13
5.4 Multi stage and RMI .13
6 Basic principles, use case and requirement overview .14
6.1 Basic principles.14
6.1.1 Basic principles for use case definition .14
6.1.2 Basic principles for requirements definition .15
6.1.3 Basic principles for functional user interface requirements definition .15
6.1.4 Basic principles for conformance test definition .15
6.2 Use case clusters .16
6.3 Requirements clusters .19
6.4 Functional user interface requirements clusters .22
6.5 Conformance test clustering .24
6.5.1 General.24
6.5.2 Main conformance test case clusters.24
7 Use cases .30
7.1 UC 1 User authentication, authorization and administration .30
7.1.1 UC 1.1 Register IO for use of the VM RMI system .30
7.1.2 UC 1.2 Register IO employee for use of the VM RMI system .31
7.1.3 UC 1.3 Maintain IO status .32
7.1.4 UC 1.4 Maintain user status .32
7.1.5 UC 1.5 Request to de-register IO employee .32
7.1.6 UC 1.6 Login to VM RMI system .33
7.1.7 UC 1.7 Grant access to security-related RMI .33
7.2 UC 2 Payment for RMI .34
7.3 UC 3 Vehicle identification .34
7.3.1 UC 3.1 Vehicle identification through product identifier .34
7.3.2 UC 3.2 Vehicle type identification via product features .35
7.4 UC 4 Provide selection methods for RMI .37
7.4.1 UC 4.1 Select information type .37
7.4.2 UC 4.2 Search by standardized terms .38
7.4.3 UC 4.3 Navigate using product structure .38
7.4.4 UC 4.4 Select by document identifier .38
7.5 UC 5 Retrieve information packages .39
7.5.1 UC 5.1 Workshop procedures .39
7.5.2 UC 5.2 Wiring diagrams .40
7.5.3 UC 5.3 Technical service bulletin .40
7.5.4 UC 5.4 Recall information .41
7.5.5 UC 5.5 Maintenance schedule .41
7.5.6 UC 5.6 Spare parts .42
ISO 18541-6:2018(E)
7.5.7 UC 5.7 Accessories .42
7.5.8 UC 5.8 Labour times .43
7.5.9 UC 5.9 Special tools .44
7.5.10 UC 5.10 Type-approval related information .44
7.6 UC 6 Vehicle diagnostics .44
7.6.1 UC 6.1 DTC resolution .44
7.6.2 UC 6.2 VM symptom resolution .45
7.6.3 UC 6.3 Integrated diagnostics .45
7.7 UC 7 Updating and replacing modules (ECUs) .46
7.8 UC 8 Electronic Maintenance history .47
7.9 UC 9 Repair assistance technical support .47
7.10 UC 10 Request contact for specific RMI .47
7.10.1 UC 10.1 Electronic tool information (Diagnostic, Reprogramming, VCI) .47
7.10.2 UC 10.2 Test equipment and diagnostic tool manufacturers.48
7.10.3 UC 10.3 Training material (delegate information) .48
7.10.4 UC 10.4 Redistributors .49
7.10.5 UC 10.5 Republishers .49
7.10.6 UC 10.6 Inspection and testing services .50
7.10.7 UC 10.7 Alternative fuels retrofit systems .50
7.10.8 UC 10.8 Engine and components remanufacturing .50
7.10.9 UC 10.9 Component and parts manufacturers .51
7.10.10 UC 10.10 Validation of independently developed non-proprietary VCIs .51
7.11 UC 11 Courses and training information .52
8 Technical requirements .53
8.1 Requirements cluster 1 — Access-related data administration .53
8.1.1 [TREQ-1] General access-related data administration .53
8.1.2 Administration of IO and IO employee data by the VM .53
8.1.3 [TREQ-4] Administration of payment data by the VM .54
8.1.4 [TREQ-5] Administration of access event data by the VM .55
8.1.5 [TREQ-6] Administration of access event data to security-related RMI by
the VM .55
8.2 Requirements cluster 2 – IT architecture .56
8.2.1 [TREQ-7] Conceptual architecture .56
8.2.2 [TREQ-8] Implementation principles .57
8.3 Requirements cluster 3 – External interfaces .60
8.3.1 [TREQ-9] Vehicle communication interface (VCI) .60
8.3.2 [TREQ-10] Trust centre (certificate management).63
8.3.3 [TREQ-11] Parts ordering for security-related features .64
8.3.4 [TREQ-12] Partnered accessory provider systems.64
8.4 Requirements cluster 4 — Technical infrastructure .64
8.4.1 [TREQ-13] Type of device .64
8.4.2 [TREQ-14] Hardware features .65
8.4.3 [TREQ-15] Operating systems .65
8.4.4 [TREQ-16] Web browsers .65
8.4.5 [TREQ-17] Presentation formats for information packages .66
8.4.6 [TREQ-18] Internet connection .66
8.4.7 [TREQ-19] Performance of the VM RMI system .66
8.5 Requirements cluster 5 – Co-existence of VM software on IO client .67
8.5.1 [TREQ-20] Requirements for installing VM-specific software on the IO client .67
8.5.2 [TREQ-21] Requirements for updating of installed VM data and
applications on the IO client .68
8.5.3 [TREQ-22] Requirements for the operation of VM-specific software on
the IO client .68
8.5.4 [TREQ-23] Requirements for the uninstalling of VM-specific software on
the IO client .69
8.5.5 [TREQ-24] Requirements for restoring in case of an abnormal
termination of the VM-specific software on the IO client .69
8.6 Requirements cluster 6 – Operations .70
iv © ISO 2018 – All rights reserved

ISO 18541-6:2018(E)
8.6.1 [TREQ-25] VM RMI system availability time .70
8.6.2 [TREQ-26] Support for the usage of the VM RMI system .70
8.6.3 [TREQ-27] Operation of the IO PC .71
8.7 [TREQ-28] Requirements cluster 7 – Functional user interface .71
9 Functional user interface requirements .72
9.1 General description .72
9.1.1 Navigational pathway from standardized use cases to VM-specific
navigation position .72
9.1.2 VM RMI system standardised navigation .73
9.2 Requirements cluster 8 — Standardized access mode .75
9.2.1 [FREQ-1] RMI access mode . .75
9.2.2 [FREQ-2] Registration and login support .76
9.3 Requirements cluster 9 — Use cases map .76
9.3.1 [FREQ-3] VM RMI system implemented use cases map .76
9.3.2 [FREQ-4] Download area .78
9.4 Requirements cluster 10 – Navigational pathway .78
9.4.1 [FREQ-5] Navigational pathway .78
10 Conformance test cases .79
10.1 Conformance test case — General structure . .79
10.1.1 Overview .79
10.1.2 Test case reference number and title [RMI-CT_.] [title] .79
10.1.3 Test purpose .79
10.1.4 Configuration .79
10.1.5 Preamble (setup state) .79
10.1.6 Test execution .79
10.1.7 Postamble.80
10.1.8 Result criteria .80
10.2 CT cluster 1 – Access-related data administration .80
10.2.1 [RMI-CT_TREQ-13, 14, 15, 16, 18, Annex B] Test client configuration .80
10.2.2 [RMI-CT_TREQ-17] Test presentation formats for information packages .81
10.3 CT cluster 2 — Test client’s external interfaces .82
10.3.1 [RMI-CT_TREQ-9] Test vehicle communication interface (VCI) .82
10.3.2 [RMI-CT_TREQ-11] Test parts ordering for security-related features .83
10.3.3 [RMI-CT_TREQ-12] Test partnered accessory provider systems .83
10.4 CT cluster 3 — Test user authentication, authorization and administration .84
10.4.1 [RMI-CT_UC1.1] Test to register IO for use of the VM RMI system .84
10.4.2 [RMI-CT_UC1.2_A] Test to register IO employee for use of the VM RMI
system — Scenario A .85
10.4.3 [RMI-CT_UC1.2_B] Test to register IO employee for use of the VM RMI
system — Scenario B .86
10.4.4 [RMI-CT_UC1.3] Test to maintain IO status .87
10.4.5 [RMI-CT_UC1.4] Test to maintain user status .88
10.4.6 [RMI-CT_UC1.5] Test to de-register an IO employee .89
10.4.7 [RMI-CT_UC1.6] Test login to VM RMI system .90
10.4.8 [RMI-CT_UC1.7] Test for granting access to security-related RMI .91
10.5 CT cluster 4 — Test functional user interface implementation .92
10.5.1 [RMI-CT_FREQ-1] Test for RMI access mode .92
10.5.2 [RMI-CT_FREQ-2] Test for registration and login support .92
10.5.3 [RMI-CT_FREQ-3] Test for implemented use cases map .93
10.5.4 [RMI-CT_FREQ-4] Test for download area .94
10.5.5 [RMI-CT_FREQ-5] Test for navigational pathway .95
10.6 CT cluster 5 — Test payment for RMI .96
10.6.1 [RMI-CT_UC2] Test payment for RMI .96
10.7 CT cluster 6 — Test for vehicle identification .97
10.7.1 [RMI-CT_UC3.1] Test vehicle identification through product identifier .97
10.7.2 [RMI-CT_UC3.2] Test vehicle identification via product features .98
10.8 CT cluster 7 — Test selection methods for RMI .99
ISO 18541-6:2018(E)
10.8.1 [RMI-CT_UC4.1] Test selection of information type .99
10.8.2 [RMI-CT_UC4.2] Test search by standardized terms .100
10.8.3 [RMI-CT_UC4.3] Test navigation using product structure .101
10.8.4 [RMI-CT_UC4.4] Test selection by document identifier .102
10.9 CT cluster 8 — Test retrieval of information packages .103
10.9.1 [RMI-CT_UC5.1.1] Test retrieval of general workshop procedures .103
10.9.2 [RMI-CT_UC5.1.2] Test retrieval of body repair procedures .103
10.9.3 [RMI-CT_UC5.1.3] Test retrieval of temporary repair procedures .104
10.9.4 [RMI-CT_UC5.1.4] Test retrieval of preparation for PTI .105
10.9.5 [RMI-CT_UC5.2] Test retrieval of wiring diagrams .106
10.9.6 [RMI-CT_UC5.3] Test retrieval of technical service bulletin .107
10.9.7 [RMI-CT_UC5.4] Test retrieval of recall information .108
10.9.8 [RMI-CT_UC5.5] Test retrieval of maintenance schedule .109
10.9.9 [RMI-CT_UC5.6.1] Test retrieval of spare parts (identification) .110
10.9.10 [RMI-CT_UC5.6.2] Test retrieval of spare parts (access) .111
10.9.11 [RMI-CT_UC5.7.1] Test retrieval of accessory information factory fitted
(included in general RMI) .111
10.9.12 [RMI-CT_UC5.7.2] Test retrieval of accessory information partnered with
a VM part number .112
10.9.13 [RMI-CT_UC5.7.3] Test retrieval of fitting information for accessories with
no VM part number .113
10.9.14 [RMI-CT_UC5.8] Test retrieval of labour times .114
10.9.15 [RMI-CT_UC5.9] Test retrieval of special tool information .115
10.9.16 [RMI-CT_UC5.10] Test retrieval of type approval information .116
10.10 CT cluster 9 — Test vehicle diagnostics .116
10.10.1 [RMI-CT_UC6.1] Test DTC resolution .116
10.10.2 [RMI-CT_UC6.2] Test VM symptom resolution .117
10.10.3 [RMI-CT_UC6.3] Test integrated diagnostics .118
10.11 CT cluster 10 — Test updating and replacing of modules (ECUs) .119
10.11.1 [RMI-CT_UC7] Test updating and replacing modules information .119
10.12 CT cluster 11 — Test electronic maintenance history .120
10.12.1 [RMI-CT_UC8] Test electronic maintenance history .120
10.13 CT cluster 12 — Test repair assistance, technical support .121
10.13.1 [RMI-CT_UC9] Test repair assistance technical support .121
10.14 CT cluster 13 — Test request for contact information .122
10.14.1 [RMI-CT_UC10.1] Test for retrieval of electronic tool information
(Diagnostic, Reprogramming, VCI) .122
10.14.2 [RMI-CT_UC10.2] Test for retrieval of test equipment and diagnostic tool
manufacturers information .123
10.14.3 [RMI-CT_UC10.3] Test for retrieval of training material
(delegate information).124
10.14.4 [RMI-CT_UC10.4] Test for retrieval of redistributor contact information .125
10.14.5 [RMI-CT_UC10.5] Test for retrieval of republisher information .125
10.14.6 [RMI-CT_UC10.6] Test for retrieval of inspection and testing
services information .126
10.14.7 [RMI-CT_UC10.7] Test for retrieval of alternative fuels retrofit
system information .127
10.14.8 [RMI-CT_UC10.8] Test for retrieval of engine and components
remanufacturing information .128
10.14.9 [RMI-CT_UC10.9] Test for retrieval of component and parts
manufacturer information .129
10.14.10 .
[RMI-CT_UC10.10] Test for retrieval of validation of independently
developed non-proprietary VCI information.130
10.15 CT cluster 14 — Test courses and training information .131
10.15.1 [RMI-CT_UC11] Test for courses and training information .131
10.16 CT cluster 15 — Test data administration requirements .132
10.16.1 [RMI-CT_TREQ-1] Test general access-related data administration .132
vi © ISO 2018 – All rights reserved

ISO 18541-6:2018(E)
10.16.2 [RMI-CT_TREQ-2] Test administration of IO data by the VM .132
10.16.3 [RMI-CT_TREQ-3] Test administration of IO employee data by the VM .133
10.16.4 [RMI-CT_TREQ-4] Test administration of payment data by VM .134
10.16.5 [RMI-CT_TREQ-5] Test administration of access event data by VM .134
10.16.6 [RMI-CT_TREQ-6] Test administration of access event data to security-
related RMI by VM .135
10.17 CT cluster 16 — Test VM software installation on the IO client .135
10.17.1 [RMI-CT_TREQ-20] Test for requirements for installing VM-specific
software on the IO client .135
10.17.2 [RMI-CT_TREQ-21] Test for requirements for updating of installed VM
data and applications on the IO client .136
10.17.3 [RMI-CT_TREQ-22] Test for requirements for the operation of VM-specific
software on the IO client .137
10.17.4 [RMI-CT_TREQ-23] Test for requirements for the uninstalling of VM-
specific software on the IO client.138
10.17.5 [RMI-CT_TREQ-24] Test for requirements for restoring in case of an
abnormal termination of the VM specific software on the IO client .139
10.18 CT cluster 17 — Test VM RMI operations .140
10.18.1 [RMI-CT_TREQ-25] Test for VM RMI system availability time .140
10.18.2 [RMI-CT_TREQ-26] Test for support for the usage of the VM RMI system .140
10.19 CT cluster 18 — Test trust centre (certificate management) .141
10.19.1 [RMI-CT_TREQ-10] Test for trust centre (certificate management) .141
Annex A (normative) Adopted elements from ISO 18541-1, ISO 18541-2, ISO 18541-3 and
ISO 18541-4 .143
Annex B (informative) PC specification .154
Bibliography .155
ISO 18541-6:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of pat
...