Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 2: Standardized process implementation requirements, Registration Authority (ISO 18542-2:2014)

ISO 18542-2:2014 specifies:
- the technical requirements that must be met by the Terminology Management system (TMS) that will be used to manage and store the 'Agreed RMI Terminology';
- the requirements for the Registration Authority (RA) (i.e. the agency responsible for maintaining and publishing the 'Agreed RMI Terminology').

Straßenfahrzeuge - Standardisierte Terminologie für Reparatur- und Wartungsinformationen (RMI) - Teil 2: Anforderungen an die Implementierung des standardisierten Prozesses, Registrierungsstelle (ISO 18542-2:2014)

ISO 18542 ist in zwei Teile untergliedert:
   Teil 1 „General information and use case definition“ — in diesem Teil sind ein Rahmen und ein Prozess für die Festlegung von Benennungen festgelegt;
   Teil 2 „Standardized process implementation requirements, Registration authority“ — in diesem Teil werden die Anforderungen an die Prozessimplementierung für ein Terminologiemanagementsystem und für eine Registrierungsstelle mit einem digitalen Anhang festgelegt.
Der Hauptzweck der Teile 1 und 2 vonder Normenreihe ISO 18542 ist es, unabhängige Marktteilnehmer bei der Suche auf RMI -Websites von Fahrzeugherstellern zu unterstützen.
Dieser Teil der ISO 18542 legt fest:
   die technischen Anforderungen fest, die von dem Terminologiemanagementsystem [TMS] erfüllt werden müssen, das für die Verwaltung und Speicherung der festgelegten RMI-Terminologie eingesetzt wird;
   die Anforderungen an die Registrierungsstelle [RA] (d. h. die Stelle, die für die Pflege und Veröffentlichung der festgelegten RMI-Terminologie verantwortlich ist) fest;
Der Rahmen und der Prozess für die Erarbeitung festgelegter Terminologie ist Gegenstand von ISO 18542 -1.
Die Zielgruppe von Teil 2dieses Teils von ISO 18542 sind technische Fachkräfte, insbesondere jene, die für die Implementierung des Mandats M/421 verantwortlich sind.

Véhicules routiers - Terminologie normalisée pour l'information sur la réparation et la maintenance (RMI) - Partie 2: Exigences relatives à l’implémentation d’un processus normalisé, Autorité d’enregistrement (ISO 18542-2:2014)

L'ISO 18542-2:2014 spécifie:
?   les exigences techniques qui doivent être satisfaites par le Système de Gestion Terminologique (SGT) qui sera utilisé pour gérer et enregistrer la «terminologie RMI convenue»;
?   les exigences relatives à l'Autorité d'Enregistrement (AE) (c'est-à-dire l'organisme responsable de la maintenance et de la publication de la «terminologie RMI convenue»).

Cestna vozila - Standardizirana terminologija za informacije o popravilu in vzdrževanju avtomobilov (RMI) - 2. del: Standardizirane zahteve za izvajanje procesa, registracijski organ (ISO 18542-2:2014)

EN ISO 18542-2 je sestavljen iz dveh delov: - 1. del: Splošna informacija in definicija primera uporabe: določa okvir in proces za dogovarjanje o pogojih - 2.del: Standardizirane zahteve za izvajanje procesa, registracijski organ: določa zahteve za izvajanje procesa za sistem vodenja terminologije in za registracijski organ z digitalnim dodatkom. Namen serije ISO 18542 je neodvisnim izvajalcem olajšati iskanje spletnih mest o informacijah o popravilu in vzdrževanju avtomobilov (RMI) proizvajalca vozila. Ta del standarda ISO 18542 določa: - tehnične zahteve, ki jih mora izpolnjevati sistem vodenja terminologije, ki bo uporabljen za upravljanje in shranjevanje dogovorjene terminologije RMI; - zahteve za registracijski organ (npr. agencijo, ki je odgovorna za ohranjanje in objavo dogovorjene terminologije RMI). Okvir in procesi za oblikovanje dogovorjene terminologije so določeni v standardu ISO 18542-1. Ciljna publika tega dela ISO 18542-2 so tehnični upravljavci, zato se osredotoča na odgovorne za izvajanje mandata M/421.

General Information

Status
Published
Publication Date
06-May-2014
Withdrawal Date
29-Nov-2014
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
07-May-2014
Due Date
19-Jan-2014
Completion Date
07-May-2014

Buy Standard

Standard
EN ISO 18542-2:2014
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2014
Cestna vozila - Standardizirana terminologija za informacije o popravilu in
vzdrževanju avtomobilov (RMI) - 2. del: Standardizirane zahteve za izvajanje
procesa, registracijski organ (ISO 18542-2:2014)
Road vehicles - Standardized repair and maintenance information (RMI) terminology -
Part 2: Standardized process implementation requirements, Registration Authority (ISO
18542-2:2014)
Straßenfahrzeuge - Standardisierte RMI-Terminologie - Teil 2: Anforderungen an die
Implementierung des standardisierten Prozesses, Registrierungsstelle (ISO 18542-
2:2014)
Véhicules routiers - Terminologie normalisée pour l'information sur la réparation et la
maintenance (RMI) - Partie 2: Exigences de mise en oeuvre des procédés normalisés,
autorité d'enregistrement (ISO 18542-2:2014)
Ta slovenski standard je istoveten z: EN ISO 18542-2:2014
ICS:
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
43.180 'LDJQRVWLþQDYGUåHYDOQDLQ Diagnostic, maintenance and
SUHVNXVQDRSUHPD test equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 18542-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 01.040.43; 43.040.15; 43.180
English Version
Road vehicles - Standardized repair and maintenance
information (RMI) terminology - Part 2: Standardized process
implementation requirements, Registration Authority (ISO 18542-
2:2014)
Véhicules routiers - Terminologie normalisée pour Straßenfahrzeuge - Standardisierte RMI-Terminologie - Teil
l'information sur la réparation et la maintenance (RMI) - 2: Anforderungen an die Implementierung des
Partie 2: Exigences de mise en oeuvre des procédés standardisierten Prozesses, Registrierungsstelle (ISO
normalisés, autorité d'enregistrement (ISO 18542-2:2014) 18542-2:2014)
This European Standard was approved by CEN on 17 April 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18542-2:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (EN ISO 18542-2:2014) has been prepared by Technical Committee CEN/TC 301 “Road
vehicles”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 22
“Road vehicles”.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawn
at the latest by November 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18542-2:2014 has been approved by CEN as EN ISO 18542-2:2014 without any modification.

INTERNATIONAL ISO
STANDARD 18542-2
First edition
2014-05-01
Road vehicles — Standardized repair
and maintenance information (RMI)
terminology —
Part 2:
Standardized process implementation
requirements, Registration Authority
Véhicules routiers — Terminologie normalisée pour l’information sur
la réparation et la maintenance (RMI) —
Partie 2: Exigences de mise en oeuvre des procédés normalisés,
autorité d’enregistrement
Reference number
ISO 18542-2:2014(E)
©
ISO 2014
ISO 18542-2:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

ISO 18542-2:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions, symbols and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 4
4 Standard and implementation . 4
4.1 Overview of Standard ISO 18542 . 4
4.2 Overview of the usage of the Digital Annex within the context of ISO 18541 . 5
5 Structure of the COTS TMS Requirements . 6
5.1 Main technical requirements clusters. 6
6 [1]: Overall system architecture . 9
6.1 [1.1] Conceptual architecture . 9
6.2 [1.2] Conceptual data and role models . 9
7 [2]: System infrastructure .12
7.1 [2.1] General IT infrastructure .12
7.2 [2.2] Infrastructure components .12
7.3 [2.3] Database management system and data storage .13
7.4 [2.4]: Security .14
8 [3]: User Interface .16
8.1 [3.1] Graphical User Interface / Interactive web pages .16
8.2 [3.2] Other interfaces .18
9 [4]: Data Management .19
9.1 [4.1] Meta objects model .19
9.2 [4.2] Data exchange .19
9.3 [4.3] Data management services .20
9.4 [4.4] Reporting .21
10 [5]: Application and workflow management .22
10.1 [5.1] General workflow .22
10.2 [5.2] Proposal .22
10.3 [5.3] Evaluation .23
10.4 [5.4] Review .23
10.5 [5.5] Translation .24
10.6 [5.6] Release .24
10.7 Download for VM .25
10.8 [5.7] Publication .25
11 [6]: Operation .25
11.1 [6.1] Availability .25
11.2 [6.2] Support .26
11.3 [6.3] Change and release .26
11.4 [6.4] System administration .26
Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.