EN ISO 23553-1:2014
(Main)Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
ISO 23553-1:2014 specifies safety, constructional and performance requirements and testing of automatic and semi-automatic valves for oil.
It applies to automatic and semi-automatic valves which are:
-normally closed;
-used in combustion plants to interrupt the oil flow with or without delay on closing;
-for use with oil types (e.g. middle distillate fuel oil, crude oil, heavy fuel oil or kerosene) without gasoline;
-for use on burners or in appliances using oil;
-directly or indirectly operated, electrically or by mechanical or hydraulic means;
-fitted with or without closed-position indicator switches.
ISO 23553-1:2014 covers type testing only.
Sicherheits-, Regel- und Steuereinrichtungen für Ölbrenner und Öl verbrennende Geräte - Spezielle Anforderungen - Teil 1: Automatische und halbautomatische Ventile (ISO 23553-1:2014)
Dieser Teil der ISO 23553 legt die Anforderungen an Sicherheit, Konstruktion und Leistung sowie die Prüfung von automatischen und halbautomatischen Ventilen für Öl fest.
Er gilt für automatische und halbautomatische Ventile, die:
als Schnellschlusseinrichtungen ausgelegt sind;
in Verbrennungsanlagen eingesetzt werden, um den Öldurchfluss mit oder ohne Verzögerung des Schließvorgangs sowie mit oder ohne Verzögerung des Öffnungsvorgangs zu unterbrechen;
für den Einsatz mit Ölsorten ohne Benzin (z. B. Diesel, Rohöl, Schweröl oder Kerosin) vorgesehen sind;
ANMERKUNG 1 Für weitere Ölsorten (z. B. Ölemulsionen) können zwischen Hersteller und Prüfstelle zusätzliche Prüfverfahren vereinbart werden.
ANMERKUNG 2 Ölsorten aus Raffinerieprozessen sind klassifiziert als ISO-F-D nach ISO 8216-99 und bilden einen Teil einer Einrichtung mit (einer) anderen Funktion(en) z. B. Ölpumpen. In diesem Fall gelten die Prüfverfahren für diejenigen Bauteile oder Komponenten der Einrichtung, die die automatischen und halbautomatischen Ventile bilden, d. h. die Bauteile, die für die Schließfunktion erforderlich sind;
für die Anwendung an Brennern oder in Geräten vorgesehen sind, die Öl nutzen;
direkt oder indirekt elektrisch oder durch mechanische oder hydraulische Hilfsmittel betrieben werden;
mit Anzeigen für die Geschlossenstellung ausgestattet sind oder nicht.
Dieser Teil der ISO 23553 behandelt nur die Typprüfung.
Dispositifs de commande et de sécurité pour brûleurs à combustible liquide et pour appareils à combustible liquide - Exigences particulières - Partie 1: Robinets automatiques et semi-automatiques (ISO 23553-1:2014)
L'ISO 23553-1:2014 spécifie les exigences relatives à la sécurité, à la conception et aux performances ainsi que les essais applicables aux robinets automatiques et semi-automatiques destinés à des appareils à combustible liquide.
Elle s'applique aux robinets automatiques et semi-automatiques qui sont:
-normalement fermés;
-utilisés dans des installations de combustion dans le but d'interrompre l'écoulement du combustible liquide avec ou sans retard sur la fermeture;
-conçus pour être utilisés avec des types de combustible liquide (par exemple, fioul de distillat moyen, pétrole brut, fioul lourd ou kérosène) sans essence;
-conçus pour être utilisés sur des brûleurs ou des appareils à combustible liquide;
-actionnés directement ou indirectement par un moyen électrique, mécanique ou hydraulique;
-équipés ou non de commutateurs à indicateurs de position fermée.
L'ISO 23553-1:2014 couvre uniquement les essais de type.
Varnostne in nadzorne naprave za oljne gorilnike in aparate na olje - Posebne zahteve - 1. del: Varnostno zaporne naprave za oljne gorilnike (ISO 23553-1:2014)
Standard EN ISO 23553-1 opredeljuje varnostne zahteve, konstrukcijske zahteve in zahteve glede zmogljivosti ter metode za preskušanje avtomatskih in polavtomatskih ventilov za nafto. Velja za avtomatske in polavtomatske ventile za nafto, ki: - so običajno zaprti, - se uporabljajo v kurilnih napravah za prekinitev dotoka nafte z ali brez zakasnjenega zapiranja; - se uporabljajo z vrstami olja brez bencina (npr. srednje destilatno kurilno olje, surova nafta, težko olje ali kerozin).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2014
1DGRPHãþD
SIST EN ISO 23553-1:2009
Varnostne in nadzorne naprave za oljne gorilnike in aparate na olje - Posebne
zahteve - 1. del: Varnostno zaporne naprave za oljne gorilnike (ISO 23553-1:2014)
Safety and control devices for oil burners and oil-burning appliances - Particular
requirements - Part 1: Shut-off devices for oil burners (ISO 23553-1:2014)
Sicherheits-, Regel- und Steuereinrichtungen für Ölbrenner und Öl verbrennende Geräte
- Spezielle Anforderungen - Teil 1: Absperreinrichtungen für Ölbrenner (ISO 23553-
1:2014)
Dispositifs de commande et de sécurité pour brûleurs à fioul et pour appareils à fioul -
Exigences particulières - Partie 1: Dispositifs de coupure pour brûleurs à fioul (ISO
23553-1:2014)
Ta slovenski standard je istoveten z: EN ISO 23553-1:2014
ICS:
27.060.10 *RULOQLNLQDWHNRþHLQWUGR Liquid and solid fuel burners
JRULYR
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 23553-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 27.060.10 Supersedes EN ISO 23553-1:2009
English Version
Safety and control devices for oil burners and oil-burning
appliances - Particular requirements - Part 1: Automatic and
semi-automatic valves (ISO 23553-1:2014)
Dispositifs de commande et de sécurité pour brûleurs à Sicherheits-, Regel- und Steuereinrichtungen für Ölbrenner
combustible liquide et pour appareils à combustible liquide - und Öl verbrennende Geräte - Spezielle Anforderungen -
Exigences particulières - Partie 1: Robinets automatiques et Teil 1: Automatische und halbautomatische Ventile (ISO
semi-automatiques (ISO 23553-1:2014) 23553-1:2014)
This European Standard was approved by CEN on 9 April 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23553-1:2014 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 23553-1:2014) has been prepared by Technical Committee ISO/TC 161 “Control and
protective devices for gas and/or oil burners and appliances” in collaboration with Technical Committee
CEN/TC 47 “Atomizing oil burners and their components - Function - Safety - Testing” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawn
at the latest by November 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 23553-1:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 23553-1:2014 has been approved by CEN as EN ISO 23553-1:2014 without any modification.
INTERNATIONAL ISO
STANDARD 23553-1
Second edition
2014-05-15
Safety and control devices for oil
burners and oil-burning appliances —
Particular requirements —
Part 1:
Automatic and semi-automatic valves
Dispositifs de commande et de sécurité pour brûleurs à combustible
liquide et pour appareils à combustible liquide — Exigences
particulières —
Partie 1: Robinets automatiques et semi-automatiques
Reference number
ISO 23553-1:2014(E)
©
ISO 2014
ISO 23553-1:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
ISO 23553-1:2014(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 4
4 Classification . 6
4.1 Classes of control . 6
4.2 Groups of control . 6
5 Test conditions . 6
6 Construction . 7
6.1 General . 7
6.2 Construction requirements . 7
6.3 Materials . 9
6.4 Oil connections.10
6.101 Welded connections .12
6.102 Indicator .12
7 Performance .12
7.1 General .12
7.2 Leak-tightness.12
7.3 Torsion and bending .14
7.4 Rated flow rate .15
7.5 Durability .15
7.6 Functional requirements .16
7.7 Endurance .17
8 EMC/Electrical requirements .18
8.1 Protection against environmental influences .18
8.2 Variations in supply voltage .19
8.3 Short-term voltage interruptions and drops .19
8.4 Variations in supply frequency .19
8.5 Surge immunity test .19
8.6 Electrical fast transient/burst .19
8.7 Immunity to conducted disturbances .19
8.8 Immunity to radiated fields .19
8.9 Electrostatic discharge immunity test .19
8.10 Test for immunity to power-frequency magnetic field .19
8.11 Electrical equipment .19
8.101 Electrical components .22
8.102 Ring wave .23
9 Marking, installation and operating instructions .24
9.1 Marking .24
9.2 Installation and operating instructions .24
9.3 Warn
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.