EN 10028-3:2003
(Main)Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
This EN 10028-3 specifies requirements for flat products for pressure equipment made of weldable fine grain steels as specified in Table 1. NOTE Fine grain steels are understood as steels with a ferritic grain size of 6 or finer when tested in accordance with EURONORM 103. The requirements and definitions of EN 10028-1 also apply.
Flacherzeugnisse aus Druckbehälterstählen - Teil 3: Schweißgeeignete Feinkornbaustähle, normalgeglüht
Die Europäische Norm EN 10028-3 enthält die Anforderungen an Flacherzeugnisse für Druckbehälter aus den schweißgeeigneten Feinkornbaustählen, die in Tabelle 1 festgelegt sind.
ANMERKUNG Unter Feinkornbaustählen werden Stähle verstanden, die bei Prüfung nach EURONORM 103 eine Ferritkorngröße von 6 oder feiner aufweisen.
Zusätzlich gelten die Anforderungen und Begriffe in EN 10028-1.
Produits plats en aciers pour appareils à pression - Partie 3: Aciers soudables à grains fins, normalisés
La présente partie 3 de l'EN 10028 spécifie les prescriptions relatives aux produits plats pour appareils à pression en aciers à grains fins aptes au soudage telles qu'indiquées dans le Tableau 1. NOTE Par "aciers à grains fins", on entend les aciers ayant une grosseur de grain ferritique <= 6, déterminée conformément à l'EURONORM 103. Les prescriptions et définitions de l'EN 10028-1 s'appliquent également.
Ploščati jekleni izdelki za tlačne posode – 3. del: Variva drobnozrnata jekla, normalizirana
General Information
- Status
- Withdrawn
- Publication Date
- 17-Jun-2003
- Withdrawal Date
- 16-Jun-2009
- Technical Committee
- ECISS/TC 107 - Steels for pressure purposes
- Drafting Committee
- ECISS/TC 22 - Steels for pressure purposes - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 17-Jun-2009
- Completion Date
- 17-Jun-2009
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 20-Jun-2009
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 10028-3:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized". This standard covers: This EN 10028-3 specifies requirements for flat products for pressure equipment made of weldable fine grain steels as specified in Table 1. NOTE Fine grain steels are understood as steels with a ferritic grain size of 6 or finer when tested in accordance with EURONORM 103. The requirements and definitions of EN 10028-1 also apply.
This EN 10028-3 specifies requirements for flat products for pressure equipment made of weldable fine grain steels as specified in Table 1. NOTE Fine grain steels are understood as steels with a ferritic grain size of 6 or finer when tested in accordance with EURONORM 103. The requirements and definitions of EN 10028-1 also apply.
EN 10028-3:2003 is classified under the following ICS (International Classification for Standards) categories: 77.140.30 - Steels for pressure purposes; 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10028-3:2003 has the following relationships with other standards: It is inter standard links to EN 10028-3:1992, EN 10028-3:2009, EN 13445-2:2009, EN 13611:2007+A2:2011, EN 1092-1:2007, EN 10028-1:2007+A1:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10028-3:2003 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071, M/BC/CEN/89/10. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10028-3:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalizedQRUPDOL]LUDQDProduits plats en aciers pour appareils a pression - Partie 3: Aciers soudables a grains fins, normalisésFlacherzeugnisse aus Druckbehälterstählen - Teil 3: Schweißgeeignete Feinkornbaustähle, normalgeglühtTa slovenski standard je istoveten z:EN 10028-3:2003SIST EN 10028-3:2003en77.140.5077.140.30ICS:SIST EN 10028-3:19971DGRPHãþDSLOVENSKI
STANDARDSIST EN 10028-3:200301-november-2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10028-3June 2003ICS 77.140.30; 77.140.50Supersedes EN 10028-3:1992English versionFlat products made of steels for pressure purposes - Part 3:Weldable fine grain steels, normalizedProduits plats en aciers pour appareils à pression - Partie3: Aciers soudables à grains fins, normalisésFlacherzeugnisse aus Druckbehälterstählen - Teil 3:Schweißgeeignete Feinkornbaustähle, normalgeglühtThis European Standard was approved by CEN on 20 January 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10028-3:2003 E
Evaluation of resistance to hydrogen induced cracking.13Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.14Bibliography.15
EN 10028-1).a) tests in the simulated normalized condition (see 8.2.2);b) delivery of products in the untreated condition (see 8.2.3);c) maximum carbon equivalent value (see 8.3.3);d) application of the Rp0,2 values of Table 5 for the corresponding P.NL1 and P…NL2 grade (see 8.4.2);e) HIC test in accordance with EN 10229 (see 8.7);f) mid thickness test pieces for the impact test (see clause 10);g) verification of impact energy for longitudinal test pieces (see clause 11);h) tensile properties for increased product thicknesses (see Table 4, footnote c);i) Rp0,2 values at elevated temperatures for increased product thicknesses (see Table 5, footnote b);j) use of test solution B for the HIC test with agreed acceptance criteria (see anne
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...