EN 10028-3:1992
(Main)Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
1.1 This Part 3 of EN 10028 specifies requirements for flat products for pressure purposes made of weldable fine grain steels as listed in table 1. NOTE: Fine grain steels' are understood to mean steels which accordance with EURONORM 103 1.2 The requirements of EN 10028-1 also apply.
Flacherzeugnisse aus Druckbehälterstählen - Teil 3: Schweißgeeignete Feinkornbaustähle, normalgeglüht
Dieser Teil 3 der EN 10028 enthält die Anforderungen an Flacherzeugnisse für Druckbehälter aus den schweissgeeigneten Feinkornbaustählen nach Tabelle 1. Anmerkung: Unter "Feinkornbaustählen" versteht man hier Stähle, die eine Ferritkorngrösse von 6 und feiner bei Prüfung nach EURONORM 103 aufweisen. Zusätzlich gelten die Angaben in EN 10028-1.
Produits plats en aciers pour appareils à pression - Partie 3: Aciers soudables à grains fins, normalisés
La présente partie 3 de l'EN 10028 traite des spécifications relatives aux produits plats pour appareils à pression en aciers à grains fins aptes au soudage conformes aux indications du tableau 1. Remarque: Par "aciers à grains fins" on entend ici les aciers ayant une grosseur de grain ferritique égale ou inférieur à 6 selon les essais définis dans l'EURONORM 103. Ces spécifications s'ajoutent à celles de la première partie de la norme EN 10028.
Ploščati jekleni izdelki za tlačne posode - 3. del: Variva drobnozrnata jekla, normalizirana
General Information
- Status
- Withdrawn
- Publication Date
- 22-Dec-1992
- Withdrawal Date
- 17-Jun-2003
- Technical Committee
- ECISS/TC 107 - Steels for pressure purposes
- Drafting Committee
- ECISS/TC 22 - Steels for pressure purposes - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 18-Jun-2003
- Completion Date
- 18-Jun-2003
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 10028-3:1992 is a standard published by the European Committee for Standardization (CEN). Its full title is "Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized". This standard covers: 1.1 This Part 3 of EN 10028 specifies requirements for flat products for pressure purposes made of weldable fine grain steels as listed in table 1. NOTE: Fine grain steels' are understood to mean steels which accordance with EURONORM 103 1.2 The requirements of EN 10028-1 also apply.
1.1 This Part 3 of EN 10028 specifies requirements for flat products for pressure purposes made of weldable fine grain steels as listed in table 1. NOTE: Fine grain steels' are understood to mean steels which accordance with EURONORM 103 1.2 The requirements of EN 10028-1 also apply.
EN 10028-3:1992 is classified under the following ICS (International Classification for Standards) categories: 77.140.30 - Steels for pressure purposes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10028-3:1992 has the following relationships with other standards: It is inter standard links to EN 10028-3:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10028-3:1992 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071, M/BC/CEN/89/10. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10028-3:1992 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QRUPDOL]LUDQDFlacherzeugnisse aus Druckbehälterstählen - Teil 3: Schweißgeeignete Feinkornbaustähle, normalgeglühtProduits plats en aciers pour appareils a pression - Partie 3: Aciers soudables a grains fins, normalisésFlat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized77.140.50SROL]GHON
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...