iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 15095:2007+A1:2008

(Main + Amendment)

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements

This European Standard provides terms and definitions on concepts and parameters used for EN 1005-21), prEN 1005-3, EN 1005-41) and EN 1005-51).
Basic concepts and general ergonomic principles for the design of machinery are dealt with in EN 292-1, EN 292-2 and EN 614-1.
This document is not applicable to specify the machinery which is manufactured before the date of publication of this document by CEN.

Kraftbetriebene verschiebbare Paletten- und Fachbodenregale, Umlaufregale und Lagerlifte - Sicherheitsanforderungen

1.1   Diese Europäische Norm behandelt die Sicherheitsanforderungen an die folgenden Arten von kraftbetriebenen Lagereinrichtungen:
   Umlaufregale;
   Lagerlifte;
   verfahrbare Fachboden-, Paletten- und Kragarmregale
mit dem Ziel, die in Abschnitt 4 aufgeführten Gefährdungen zu eliminieren oder zu minimieren. Diese Gefährdungen können während der Montage, der Inbetriebnahme, des Betriebes, der Instandhaltung, der Prüfung und der Demontage der Einrichtung entstehen.
1.2   Wesentlich ist, dass die Sicherheitsanforderungen und/oder Maßnahmen dieser Norm auf Lagereinrich-tungen angewendet werden, die in geschlossenen Räumen betrieben werden. Beim Einsatz unter erschwerten Bedingungen kommt es darauf an, dass zusätzliche Gefährdungsanalysen und Sicherheits¬maßnahmen berücksichtigt werden, z. B. Bedingungen bei Betrieb im Freien, Kühlhausanwendungen, hohe Temperaturen, korrosive Umgebungen, starke magnetische Felder, Gefahr einer explosionsfähigen Atmosphäre, radioaktive Bedingungen, Lagergüter, die auf Grund ihrer Beschaffenheit gefährliche Situationen hervorrufen könnten (z. B. feuerflüssiges Metall, Säuren/Laugen, zerbrechliche Güter oder Sprengstoffe), Auswirkungen von Erdbeben und auch Kontakt mit Lebensmitteln.
1.3   Beispiele von kraftbetriebenen Lagereinrichtungen, für die diese Norm gilt, sind im Anhang A dargestellt.
1.4   Für Gebäude und Gebäudeteile gilt diese Norm nur insoweit, als eine Bewertung hinsichtlich Gefährdungen und Risiken im Zusammenhang mit Schnittstellen zu den Lagereinrichtungen erfolgt.
1.5   Vom Anwendungsbereich dieser Norm sind Lagereinrichtungen ausgenommen, deren einzige Kraft-quelle die unmittelbar angewandte menschliche Arbeitskraft oder die Schwerkraft ist.
1.6   Kraftbetriebene Lagereinrichtungen oder Teile davon fallen nicht unter die Vorschriften für Aufzüge. [....]

Élévateurs de stockage, carrousels et rayonnages à palette et à tablette, mobiles et motorisés - Prescriptions de sécurité

1.1 La présente Norme européenne traite des prescriptions techniques pour les types suivants d’équipements de
stockage à commande mécanique :
— carrousels de stockage ;
— élévateurs de stockage ;
— rayonnage mobile, rayonnage à palettes et rayonnage en porte-à-faux ;
dans le but de réduire à un minimum les phénomènes dangereux décrits dans l’Article 4. Ces phénomènes
dangereux peuvent survenir pendant l’installation, la mise en route, le fonctionnement, la maintenance, les essais et
le démontage de l’équipement.
1.2 Il est essentiel que les prescriptions et/ou mesures de sécurité prises dans la présente norme s’appliquent aux
équipements de stockage qui fonctionnent en intérieur. Dans des conditions difficiles, il est essentiel qu’une analyse
des risques supplémentaire et des mesures additionnelles de sécurité soit prises en compte, par exemple : conditions
extérieures, applications à basse température, hautes températures, environnement corrosif, champs magnétiques
forts, risque d’atmosphère explosive, conditions radioactives, marchandises de stockage qui par nature sont
susceptibles de créer des situations dangereuses (par exemple : métal fondu, acides/alcalis, marchandises fragiles
ou explosifs), effets sismiques et également contact avec la nourriture.
1.3 Des exemples d’équipements de stockage motorisés auxquels la présente norme s’applique sont illustrés
dans l’Annexe A.

Pomični regali, pomični paletni regali, vrtljive naprave in skladiščna dvigala z lastnim pogonom - Varnostne zahteve

General Information

Status
Published
Publication Date
16-Dec-2008
ICS
53.080 - Storage equipment
Technical Committee
CEN/TC 149 - Rail-dependent storage and retrieval equipment - Safety
Drafting Committee
CEN/TC 149/WG 4 - Power-operated warehouse equipment
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
05-Mar-2023
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 15095:2008+A1:2009 - Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements

Relations

Merged From
EN 15095:2007 - Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements
Effective Date
19-Jan-2023

Buy Standard

EN 15095:2008+A1:2009EN 15095:2008+A1:2009
PreviousNext
Standard
EN 15095:2008+A1:2009
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kraftbetriebene verschiebbare Paletten- und Fachbodenregale, Umlaufregale und Lagerlifte - SicherheitsanforderungenÉlévateurs de stockage, carrousels et rayonnages à palette et à tablette, mobiles et motorisés - Prescriptions de sécuritéPower-operated mobile racking and shelving, carousels and storage lifts - Safety requirements53.080Storage equipmentICS:Ta slovenski standard je istoveten z:EN 15095:2007+A1:2008SIST EN 15095:2008+A1:2009en,fr01-marec-2009SIST EN 15095:2008+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15095:2007+A1
December 2008 ICS 53.080 Supersedes EN 15095:2007 English Version
Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements
Élévateurs de stockage, carrousels et rayonnages à palette et à tablette, mobiles et motorisés - Prescriptions de sécurité
Kraftbetriebene verschiebbare Paletten- und Fachbodenregale, Umlaufregale und Lagerlifte - Sicherheitsanforderungen This European Standard was approved by CEN on 23 September 2007 and includes Amendment 1 approved by CEN on 9 November 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15095:2007+A1:2008: ESIST EN 15095:2008+A1:2009

Types of power-operated storage equipment . 31 Annex B (informative)
Power-operated mobile storage systems . 34 Annex C (informative)
Rail tolerances for mobile racking . 36 Annex D (normative)
Rack and pinion . 39 D.1 Pinion . 39 D.2 Rack(s) . 39 D.3 Rack/pinion(s) engagement . 39 Annex E (informative)
Chains in vertical carousels . 41 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 42 Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 43 Bibliography . 44
Tables Table 1 — List of significant hazards . 12 Table 2 . 25
When this standard was prepared it was assumed that:  only trained staff would operate, repair or maintain the machine;  components without special requirements are 1) sized in accordance with good engineering practice and methods of calculation including all types of failure; 2) correctly constructed mechanically and electrically; 3) made of materials of adequate loading capacity and of suitable quality; 4) made of materials that are fit for that purpose.  components are kept in a good repair and operating condition so that the required characteristics can be maintained in spite of wear and tear;  sizing of load bearing parts ensures safe operation of the machine in a loading range from 0 % to 100 % of the nominal capacity and during testing conditions if applicable;  details of particular conditions of use and the installation site are agreed between user and manufacturer;  working area is adequately illuminated;  installation site permits safe operation of the machine. SIST EN 15095:2008+A1:2009
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 528:2021+A1:2022(Main + Amendment)
Rail dependent storage and retrieval equipment - Safety requirements for S/R machines
SIST EN 528:2021+A1:2022

This document applies to all types of Storage and Retrieval (S/R) machines, restricted to the rails on which they travel within and outside the aisles for the storage and retrieval of unit loads and/or long goods such as bar materials and/or for order picking or similar duties. These machines shall embody lifting means along a mast and may include lateral handling facilities. Also included is the transfer equipment used to change between aisles. Control of machines may range from manual to fully automatic.
S/R-machine-related satellite vehicles according to definition 3.20 are included as a load-handling-device (LHD).
References in this standard to racking, buildings and systems only apply where it is necessary to assess the hazards and risks at their interfaces with S/R machines.
This document deals with all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used under the conditions intended by the manufacturer including reasonably foreseeable misuse (see Annex F "List of significant hazards")).
This document applies to machines and equipment that are manufactured after the date of issue of this document.
Illustrations of examples of machines and transfer equipment to which this standard applies are shown in Annex A.
Safety requirements and/or measures in this standard apply to equipment used under indoor conditions. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e.g. extremely high temperatures, loads, the nature of which could lead to a dangerous situation (e.g. especially brittle loads, explosives), earthquake effects and also contact with foodstuff.
This document also deals with the technical requirements for electromagnetic compatibility (EMC).

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    113 pages
    French language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 528:2021+A1:2022(Main + Amendment)
Rail dependent storage and retrieval equipment - Safety requirements for S/R machines
SIST EN 528:2021+A1:2022

This document applies to all types of Storage and Retrieval (S/R) machines, restricted to the rails on which they travel within and outside the aisles for the storage and retrieval of unit loads and/or long goods such as bar materials and/or for order picking or similar duties. These machines shall embody lifting means along a mast and may include lateral handling facilities. Also included is the transfer equipment used to change between aisles. Control of machines may range from manual to fully automatic.
S/R-machine-related satellite vehicles according to definition 3.20 are included as a load-handling-device (LHD).
References in this standard to racking, buildings and systems only apply where it is necessary to assess the hazards and risks at their interfaces with S/R machines.
This document deals with all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used under the conditions intended by the manufacturer including reasonably foreseeable misuse (see Annex F "List of significant hazards")).
This document applies to machines and equipment that are manufactured after the date of issue of this document.
Illustrations of examples of machines and transfer equipment to which this standard applies are shown in Annex A.
Safety requirements and/or measures in this standard apply to equipment used under indoor conditions. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e.g. extremely high temperatures, loads, the nature of which could lead to a dangerous situation (e.g. especially brittle loads, explosives), earthquake effects and also contact with foodstuff.
This document also deals with the technical requirements for electromagnetic compatibility (EMC).

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    113 pages
    French language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15512:2020+A1:2022(Main + Amendment)
Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
SIST EN 15512:2021+A1:2022

This document specifies the structural design requirements applicable to all types of adjustable beam pallet rack systems fabricated from steel members intended for the storage of unit loads and subject to predominantly static loads. Both un-braced and braced systems are included.
This document gives guidelines for the design of clad rack buildings where requirements are not covered in the EN 1993 series. The requirements of this document also apply to ancillary structures, where rack components are employed as the main structural members.
This document does not cover other generic types of storage structures. Specifically, this document does not apply to mobile storage systems, drive-in, drive-through, pallet live storage, push back, shuttle systems, systems where two or more cranes operates one above another in the same aisle and cantilever racks or static steel shelving systems.
For the specific design of adjustable pallet racking for use in seismic areas, this document is to be used in combination with EN 16681.

  • Standard
    182 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15620:2021(Main)
Steel static storage systems - Tolerances, deformations and clearances
SIST EN 15620:2021

This document specifies tolerances, deformations and clearances that pertain to the production, assembly and erection and performance under load of pallet racking and cantilever racking. These tolerances, deformations and clearances are important in relation to the functional requirements and ensuring the proper interaction of the handling equipment used by personnel, trained and qualified as competent, in association with the specific type of racking system. The interaction conditions are also important in determining the reliability of the storage system to ensure that the chance of mechanical handling equipment impact, pallet impact or a system breakdown is acceptably low.
This document is limited to:
— single deep adjustable beam pallet racking operated with industrial trucks;
— single and double deep adjustable beam pallet racking operated with stacker cranes;
— drive-in and drive through racking systems operated with industrial trucks;
— cantilever racking systems operated with industrial trucks.
This document does not apply to specialized types of equipment such as automated trucks, miniload, satellite systems, systems involving the use of articulated trucks, trucks using intrusive stacking methods or industrial truck serviced rack-clad buildings.
This document specifically excludes the tolerances and deformation of the industrial trucks, stacker cranes and floors.
It is the responsibility of the specifier in cooperation with the client or user to ensure that the tolerances, deformations and clearances, as quoted in this document are acceptable for safe operation of the overall system considering all factors of influence and the user informed by means such as operation instructions. The specifier can carry out appropriate design/calculations to vary some of the parameters provided that an equivalent safe operation is achieved.
This document gives guidance to be used in conjunction with mechanical handling equipment and floor information.
This document gives guidance to be used in conjunction with mechanical handling equipment and floor information.

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16681:2016(Main)
Steel static storage systems - Adjustable pallet racking systems - Principles for seismic design
SIST EN 16681:2016

This European Standard specifies the structural design requirements applicable to all types of adjustable pallet racking systems fabricated from steel members, intended for storage of unit loads and subject to seismic actions.
This European Standard gives also guidelines for the design of clad rack buildings in seismic zones, where requirements are not covered in the EN 1998 series.
This European Standard does not cover other generic types of storage structures. Specifically, this European Standard does not apply to mobile storage systems, drive-in, drive-through and cantilever racks or static steel shelving systems.
This European Standard does not apply to the design of seismic isolated racking structures.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12195-1:2010(Main)
Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces
SIST EN 12195-1:2011

This European Standard is applicable to the design of securing methods (blocking, lashing, and combinations) for securing of loads for surface transport by road vehicles or parts of them (lorries, trailers, containers and swap bodies), including their transport on vessels or by rail and/or combinations thereof. Hump shunting with acceleration over 1 g during railway transport is excluded, as it is not foreseen in combined transport. (Web lashings see EN 12195-2, lashing chains see EN 12195-3, lashing steel wire ropes see EN 12195-4).
This European Standard does not apply for vehicles with a total weight equal to or lower than 3 500 kg.
NOTE   Lighter vehicles can have driving characteristics, which give higher values of acceleration on the road.
For dimensioning of load securing a distinction is made between stable loads and loads liable to tilting.
Furthermore, the acceleration coefficients for surface transport are specified.
For over top lashing the force loss in the tension force of the lashing at the outer edges between load and lashing is taken into account. The securing forces to be chosen for calculation in this EN 12195-1 are static forces produced by blocking or tensioning of lashings and dynamic forces, which act on the lashing as a reaction of the load movements.
Examples for the application of calculations are given in Annex A.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15878:2010(Main)
Steel static storage systems - Terms and definitions
SIST EN 15878:2010

This European Standard specifies terms and definitions for steel storage systems, as listed in Table 1, and their basic components and accessories.
NOTE   Terms and definitions for mechanical handling equipment and load make-up accessories are included in informative annexes.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14010:2003+A1:2009(Main + Amendment)
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
SIST EN 14010:2004+A1:2010

1.1   This European Standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during installation , operation and maintenance of permanently installed equipment and systems for the power driven parking of motor vehicles, as defined in 3.1 to 3.4 below. Requirements are also given on the provision of information for use, which includes requirements for the drafting of the instructions. Electromagnetic compatibility requirements are also covered.
1.2   This European Standard applies to equipment and systems for the power driven parking of motor vehicles which have four wheels, are within a maximum size envelope of 5,30 m long, by 2,30 m wide, by 2,20 m high and have a mass less than 2500 kg. The equipment can be manually or automatically controlled.
1.3   This standard does not cover:
a)   vehicle lifts (see EN 1493);
b)   peripheral devices, which do not handle motor vehicles, e.g. parking meters, ticket machines;
c)   requirements related to the building even if they support directly stored vehicles;
d)   goods only lifts in accordance with EN 81-31;
e)   power driven parking equipment intended for lifting and/or transporting any person;
f)   transmission and interface of remote controls;
g)   automatic parking equipment with transfer areas which move;
h)   the use of power driven parking equipment by wheelchair users and deaf persons;
i)   the workplace of any attendant.
1.4   This standard does not deal with the following:
a)   hazards arising if loads, or other items fall from vehicles;
b)   hazards arising if fuel or oil leaks from vehicles;
c)   hazards caused by operating the equipment/system in electromagnetic fields outside the range of
EN 61000-6-2;
d)   hazards caused by operating the equipment/system in areas subject to special regulations (e.g. explosive atmospheres, fire risks);
e)   hazards caused by the use of dangerous/toxic materials, e.g. special hydraulic oil;
f)   hazards caused by noise;
g)   (....)

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1398:2009(Main)
Dock levellers - Safety requirements
SIST EN 1398:2010

1.1   This European Standard specifies the safety requirements for design, construction, installation, maintenance and testing of dock levellers and for safety components on dock levellers.
With the exception of:
a)   dock levellers for marine and aircraft applications;
b)   lifting tables;
c)   vehicle mounted tail lifts.
NOTE 1   Requirements for lifting tables are laid down in EN 1570.
NOTE 2   Requirements for vehicle mounted tail lifts are laid down in EN 1756-1.
1.2   This European Standard is applicable to dock levellers which are used by persons and/or manual or power driven transport equipment (e. g. forklift trucks) as traffic paths between goods vehicles, both road vehicles and rail wagons, and parts of buildings such as loading docks. This standard does not deal with other bridging devices not shown in Figure 1.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15629:2008(Main)
Steel static storage systems - Specification of storage equipment
SIST EN 15629:2009

This European Standard supplies guidelines for the technical specification to allow the design of racking and shelving in its various forms such as adjustable pallet racking (APR), crane serviced racking, drive-in racking (DIR), cantilever racking and shelving systems, including their various forms of construction, using manually operated and controlled mechanical handling systems. Some other forms of storage equipments are only partially covered and further consideration, beyond the scope of this document, may be required.
This European Standard gives guidance for the specifier of storage systems to coordinate suppliers of all equipment including individual responsibilities.
This European Standard does not cover storage equipments manufactured from materials other than steel (except for certain accessories) and equipment intended to be used for domestic storage purposes.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day