M/XXX - Servers and data storage 2
Ecodesign requirements for servers and data storage products
General Information
This document specifies sampling plans and methods of representative sampling of plant biostimulants to obtain samples for physical, chemical and biological analysis.
It is applicable to the sampling of batches of plant biostimulants supplied or ready for supply to third parties, as such, or in smaller batches.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products: Fertilizers/Liming Materials/Soil Improvers/Growing Media/Inhibitors/Plant Biostimulants, and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
This document is intended to be used by manufacturers, buyers and competent authorities to obtain samples prior to transport and supply it to a laboratory for testing.
- Draft33 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the detection of Salmonella spp. in biostimulants.
This document is applicable to all microbial biostimulants in agriculture.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft24 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of total contents of arsenic (As), cadmium (Cd), copper (Cu), chromium (Cr), lead (Pb), nickel (Ni) and zinc (Zn) in aqua regia plant biostimulant digests using inductively coupled plasma-atomic emission spectrometry (ICP-AES).
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Inhibitors, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
This method is applicable to aqua regia digests prepared according to EN 17701-1:2024. The method can be used for the determination of other elements, provided the user has verified the applicability.
NOTE Alternatively, inductively coupled plasma mass spectrometry (ICP-MS) can be used for the determination of the elements in the aqua regia digests if the user proves that the method gives the same results.
- Draft22 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides a method for verifying that the pathogen Shigella spp. is not present in microbial plant biostimulants.
The detection method for Shigella pathogens is not sensitive and quantification is rarely performed. Detection is usually performed using an enrichment medium followed by subculturing onto a variety of selective media.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft32 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a horizontal method for the enumeration of yeasts and moulds present in plant biostimulants intended for use in agriculture, by means of the colony count technique after aerobic incubation at 25 °C ± 2,5 °C.
This document allows the enumeration of yeasts and moulds, in technical and formulated plant biostimulants, both in liquid and solid states. The method is applicable to microbial plant biostimulants except those composed of fungi or yeasts.
If necessary, yeasts and moulds enumerated can be identified using suitable identification tests.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft23 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the enumeration of enterococci in microbial and non-microbial plant biostimulants. This document specifies a colony-count technique on a selective medium (Slanetz-Bartley agar) with confirmation on Bile Esculin Azide agar.
This document is applicable to all formulations of microbial and non-microbial plant biostimulants in liquid or solid form. This document is not applicable to other fertilizing products.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method to verify that the pathogen Staphylococcus aureus is absent from microbial plant biostimulants. The method is based on the enumeration of coagulase-positive staphylococci in a sample by counting of colonies obtained on a solid medium (Baird-Parker medium) after aerobic incubation at 36 °C ± 2 °C.
This document is applicable to all formulations of microbial plant biostimulants in liquid or solid form. This document is not applicable to other fertilizing products.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a horizontal method for the detection of enteropathogenic Vibrio species (spp.), which causes human illness in or via the intestinal tract. The species detectable by the methods specified include Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus.
It is applicable to the microbial plant biostimulants.
NOTE 1 The World Health Organization (WHO) has identified that V. parahaemolyticus, V. cholerae and V. vulnificus are the major contaminants of Vibrio spp. [2].
NOTE 2 For confirmation, it is possible to use PCR (Polymerase Chain Reaction) tests; in this case a validation is carried out by the laboratory for the procedure and data generated.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft41 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the general principles for justifying the product claims for plant biostimulants. It is applicable to all claims and all types of application of plant biostimulants.
General principles define all general parameters, requirements and quality criteria to be applied in order to assess trials conducted to validate the claim(s) associated with the use of a plant biostimulant.
This document is aimed primarily at manufacturers, laboratories, researchers, technical centres and companies that intend to place plant biostimulants on the market, as well as notifying authorities, notified bodies, and market surveillance authorities.
- Draft27 pagesEnglish languagesale 10% offe-Library read for1 day
This document gives guidance on a consistent approach to justify the claims associated with the use of plant biostimulants.
This document is aimed primarily at manufacturers, laboratories, researchers, technical centres and companies that intend to place plant biostimulants on the market, as well as notifying authorities, notified bodies, and market surveillance authorities.
To be in compliance with this standard, it is important to also follow the recommendations and quality criteria described in the standard EN 17700-1:2024 on general principles to demonstrate plant biostimulant claims.
- Draft13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a potentiometric method for the determination of chloride (Cl-) content in the presence or in the absence of organic material. This method is applicable to plant biostimulants.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Inhibitors, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft16 pagesEnglish languagesale 10% offe-Library read for1 day
This document gives guidance on a consistent approach to justify the claims associated with the use of plant biostimulants.
This document is aimed primarily at manufacturers, laboratories, researchers, technical centres, and companies that intend to place plant biostimulants on the market, as well as notifying authorities, notified bodies, and market surveillance authorities.
To be in compliance with this standard, it is important to also follow the recommendations and quality criteria described in the standard EN 17700-1:2024 on general principles to demonstrate plant biostimulant claims.
- Draft13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the design, testing and inspection requirements for pressure relief valve isolating devices, valve manifolds, vent pipes and system assemblies which are, where necessary, used with pressure relief valves for use in static pressure vessels for Liquefied Petroleum Gas (LPG) service.
This document addresses both prototype testing and production testing of isolating devices and PRV manifolds.
Pressure relief valves for LPG pressure vessels are specified in EN 14129:2014.
- Draft24 pagesEnglish languagesale 10% offe-Library read for1 day
This document gives guidance on a consistent approach to justify the claims associated with the use of plant biostimulants.
This document is aimed primarily at manufacturers, laboratories, researchers, technical centres, and companies that intend to place plant biostimulants on the market, as well as notifying authorities, notified bodies, and market surveillance authorities.
To be in compliance with this standard, it is important to also follow the recommendations and quality criteria described in the standard EN 17700-1:2024 on general principles to demonstrate plant biostimulant claims.
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods for the reduction and preparation of samples of non-microbial plant biostimulants and sets out the requirements for sample preparation reports. It specifies methods for the preparation of test samples and test portions from laboratory samples of plant biostimulants for subsequent chemical, biological or physical analysis.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products: Fertilizers/Liming Materials/Soil Improvers/Growing Media/Inhibitors/Plant Biostimulants, and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
This document does not include methods for the reduction and preparation of samples of microbial plant biostimulants and samples intended for determination of microbial pathogens, which will be covered by a different European Standard.
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a horizontal method for the enumeration of microorganisms that are able to grow and form colonies in a solid medium after anaerobic incubation at 30 °C.
The method applies to microbial plant biostimulants, except those composed of aerobic bacteria.
This method does not apply to the microbiological monitoring of the environment in which microbial plant biostimulants are manufactured.
No information about potential human pathogens can be inferred from anaerobic plate counts.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides the methodology for the enumeration and determination of Rhizobiaceae (Rhizobium spp., Mesorhizobium spp., Ensifer spp., Bradyrhizobium spp.).
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft22 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the method for the digestion of different plant biostimulants with aqua regia to enable a subsequent determination of arsenic (As), cadmium (Cd), copper (Cu), chromium (Cr), mercury (Hg), nickel (Ni), lead (Pb) and zinc (Zn). The method can be also applied for determination of other elements. The method is applicable for all solid and/or liquid plant biostimulants.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Inhibitors, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
The digests are suitable for analysis using EN 17701-2:2024 (ICP-AES) and EN 17701-3:2024 (Hg analysis).
NOTE Alternatively, inductively coupled plasma mass spectrometry (ICP-MS) can be used for the determination of the elements in the aqua regia digests if the user proves that the method gives the same results.
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for laboratory measurement of the pH value in liquid microbial plant biostimulants, using pH electrodes with a glass membrane.
This document does not apply to plant biostimulants other than microbial plant biostimulants.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document was developed to provide the methodology for the enumeration and determination of Azotobacter spp. [2] [3] in microbial plant biostimulants in accordance with the Regulation (EU) 2019/1009 of the European Parliament and of the Council [1].
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft19 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the methods to be used for the determination of quantity of plant biostimulants sold or offered for sale.
This document specifies the methods to be used for the determination of quantity of solid and liquid forms of plant biostimulants in packages, containers or in bulk.
This document is not applicable to the quantity determination of: inorganic, organic and organo-mineral fertilizers, liming materials, inhibitors, soil improvers and growing media.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers and Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft20 pagesEnglish languagesale 10% offe-Library read for1 day
This document gives guidance on a consistent approach to justify the claims associated with the use of plant biostimulants.
This document is aimed primarily at manufacturers, laboratories, researchers, technical centres, and companies that intend to place plant biostimulants on the market, as well as notifying authorities, notified bodies, and market surveillance authorities.
To be in compliance with this standard, it is important to also follow the recommendations and quality criteria described in the standard EN 17700-1:2024 on general principles to demonstrate plant biostimulant claims.
- Draft11 pagesEnglish languagesale 10% offe-Library read for1 day
This document gives guidance for the detection and identification of the specified microorganism Escherichia coli in technical and formulated plant biostimulants, both in liquid and solid states, and also the horizontal method for the enumeration of ß-glucuronidase-positive E. coli in plant biostimulants (both in liquid and solid states).
The qualitative method described in this document is based on the detection of E. coli in a non-selective liquid medium (enrichment broth), followed by isolation on a selective agar. Other methods can be appropriate, depending on the level of detection required.
NOTE 1 For the detection of E. coli, subcultures can be performed on non-selective culture media followed by suitable identification steps (e.g. using identification kits).
The quantitative method described in this document uses a colony-count technique at 44 °C ± 1 °C on a solid medium containing a chromogenic ingredient for detection of the enzyme ß-glucuronidase.
NOTE 2 Strains of E. coli which do not grow at 44 °C ± 1 °C and, in particular, those that are ß-glucuronidase negative, such as E. coli O157, will not be detected.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft25 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a horizontal method for the enumeration and genus/species determination [2], [3], [4] of mycorrhizal fungi in microbial plant biostimulants.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft45 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides the methodology for the enumeration and determination of Azospirillum spp. in microbial plant biostimulants.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft22 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the detection of Listeria monocytogenes in microbial plant biostimulants.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Draft32 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the requirements for the design and testing of spring loaded pressure relief valves and thermal expansion valves for use in:
- static LPG pressure vessels,
NOTE The pressure vessels can be situated above ground, underground or mounded.
- transportable LPG welded steel pressure drums,
- LPG pressure vessels on road tankers, rail tankers, tank-containers or demountable tanks.
This document does not address relief valves for LPG cylinders, which are identified in EN 13953.
This document does not address production testing.
Normative Annex B prescribes testing with conditioning at - 40 °C for valves for use under extreme low temperature conditions.
The requirements for pressure relief valve accessories such as isolating devices, changeover manifolds and vent pipes are specified in EN 14071.
EN 14570 identifies the requirements for the pressure relief valve capacities for static pressure vessels.
EN 12252 identifies the requirements for the pressure relief valve capacities for road tankers.
Valves designed in accordance with this standard are specifically for use in LPG applications. Valves manufactured in accordance with EN ISO 4126 1 may also be used in certain LPG applications.
Terms used with LPG pressure relief valves are described graphically in Annex A.
- Draft33 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies classification, requirements for the construction, performance and energy consumption testing of gelato scooping cabinets and pozzetto used to sale and/or display artisan and self made gelato. It specifies test conditions and methods for checking that the requirements have been satisfied, their marking and the list of their characteristics to be declared by the manufacturer.
- Standard61 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies design, construction, type and production testing, and marking requirements for both non-insulated cryogenic flexible hoses and insulated vacuum jacketed hoses used for the transfer of cryogenic fluids within the following range of operating conditions:
— working temperature range: from −270 °C to +65 °C;
— nominal size (DN): from 10 to 100.
End fittings for mounting of any couplings are within the scope of this document, but the couplings are subject to other standards.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies new methods available to customers from the logistic transportation companies for safe secure and contactless delivery of postal items.
The methods specified in this document provides the senders and the receivers with a proof of receipt or proof that an attempt of delivery was made. It includes methods on how to deliver without having the customer to sign for the delivery.
More specifically, the methods specified in this document cover the process of last mile delivery of postal items, including home delivery and delivery at public places, residential buildings and corporate buildings.
This document describes all delivery methods, including those requiring physical contact, and rank them from a health and safety, and operational point of view.
- Technical report18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies classification, requirements for the construction, performance and energy consumption testing of:
- gelato scooping cabinets used for sale and display of artisan and self-made gelato;
- pozzetto used for sale of artisan and self-made gelato, without any display function.
It specifies test conditions and methods for checking that the requirements have been satisfied, their marking and the list of their characteristics to be declared by the manufacturer.
- Standard61 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies new methods available to customers from the logistic transportation companies for safe secure and contactless delivery of postal items.
The methods specified in this document provides the senders and the receivers with a proof of receipt or proof that an attempt of delivery was made. It includes methods on how to deliver without having the customer to sign for the delivery.
More specifically, the methods specified in this document cover the process of last mile delivery of postal items, including home delivery and delivery at public places, residential buildings and corporate buildings.
This document describes all delivery methods, including those requiring physical contact, and rank them from a health and safety, and operational point of view.
- Technical report18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies design, construction, type and production testing, and marking requirements for both non-insulated cryogenic flexible hoses and insulated vacuum jacketed hoses used for the transfer of cryogenic fluids within the following range of operating conditions:
— working temperature range: from −270 °C to +65 °C;
— nominal size (DN): from 10 to 100.
End fittings for mounting of any couplings are within the scope of this document, but the couplings are subject to other standards.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies methods for determining temperature and time profiles during composting and anaerobic digestion for the production of compost and digestate.
The process monitoring is an organized check and recording of the temperature during a specific time of the composting and anaerobic digestion process.
This standard only applies to composting and anaerobic digestion.
This standard is intended to be used by manufacturers, and enforcement agencies for the purpose of manufacturing control.
The requirements of this standard may differ from national legal requirements for the production process of compost and digestate.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods for the determination of quantity of the following solid and liquid
fertilizing products: organic fertilizers, organo-mineral fertilizers, inorganic fertilizers, liming materials
and inhibitors in packages, containers or in bulk.
This document is applicable to fertilizing products blends where organic fertilizers, organo-mineral
fertilizers, inorganic fertilizers, liming materials and inhibitors are the highest % of the blend by mass
or volume, or in the case of liquid form by dry mass. If organic fertilizers, organo-mineral fertilizers,
inorganic fertilizers, liming materials and inhibitors are not the highest % of the blend, the European
Standard for the highest % of the blend applies. In case a fertilizing product blend is made up of
components in equal quantity, the user decides which standard to apply.
This document is not applicable to the quantity determination of: growing media, soil improvers and
plant biostimulants.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the method for taking a sample of solid and liquid forms of organic fertilizers, organo-mineral fertilizers and inorganic fertilizers containing more than 1 % by mass of organic carbon, when in packages, containers or in bulk, to test for levels of controlled pathogens present.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the method for taking a sample of solid and liquid forms of organic fertilizers, organo-mineral fertilizers and inorganic fertilizers containing more than 1 % by mass of organic carbon, when in packages, containers or in bulk, to test for levels of controlled pathogens present.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods for determining temperature-time profiles during composting and anaerobic digestion for the production of compost and digestate.
The process monitoring is an organized check and recording of the temperature during a specific time of the composting and anaerobic digestion process.
This document only applies to composting and anaerobic digestion.
This document is intended to be used by manufacturers and enforcement agencies for the purpose of manufacturing control.
The requirements of this document can differ from national legal requirements for the production process of compost and digestate.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for the performance of refrigerated display cabinets used in the sale and display of foodstuffs and construction characteristics impacting performance. It specifies test conditions and methods for checking that the requirements have been satisfied, as well as classification of the cabinets, their marking and the list of their characteristics to be declared by the manufacturer.
This document is not applicable to refrigerated vending machines, commercial beverage coolers covered by ISO 22044, ice cream freezers covered by ISO 22043. It is also not applicable to cabinets intended for storage or cabinets intended for use, for instance, in catering or non-retail refrigerated applications.
This document does not cover health and safety aspects and ergonomic principles.
This document is not intended to specify storage temperature for foodstuff.
- Standard120 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines terms related to refrigerated display cabinets used for the sale and display of foodstuffs.
It does not apply to refrigerated vending machines or cabinets intended for use in catering or similar non-retail applications.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines the key actors in the eCall chain of service provision as:
1) In-Vehicle System (IVS)/vehicle,
2) Mobile network Operator (MNO),
3) Public safety assistance point [provider](PSAP),
in some circumstances may also involve:
4) Third Party Service Provider (TPSP),
and to provide conformance tests for actor groups 1) - 4).
NOTE Conformance tests are not appropriate nor required for vehicle occupants, although they are the recipient of the service.
This European Standard covers conformance testing (and approval) of new engineering developments, products and systems, and does not imply testing associated with individual installations in vehicles or locations.
- Standard264 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies methods for the determination of quantity of the following solid and liquid fertilizing products: organic fertilizers, organo-mineral fertilizers, inorganic fertilizers, liming materials and inhibitors in packages, containers or in bulk.
This document is applicable to fertilizing products blends where organic fertilizers, organo-mineral fertilizers, inorganic fertilizers, liming materials and inhibitors are the highest % of the blend by mass or volume, or in the case of liquid form by dry mass. If organic fertilizers, organo-mineral fertilizers, inorganic fertilizers, liming materials and inhibitors are not the highest % of the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is made up of components in equal quantity, the user decides which standard to apply.
This document is not applicable to the quantity determination of: growing media, soil improvers and plant biostimulants.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for the performance of refrigerated display cabinets used in the sale and display of foodstuffs and construction characteristics impacting performance. It specifies test conditions and methods for checking that the requirements have been satisfied, as well as classification of the cabinets, their marking and the list of their characteristics to be declared by the manufacturer.
This document is not applicable to refrigerated vending machines, commercial beverage coolers covered by ISO 22044, ice cream freezers covered by ISO 22043. It is also not applicable to cabinets intended for storage or cabinets intended for use, for instance, in catering or non-retail refrigerated applications.
This document does not cover health and safety aspects and ergonomic principles.
This document is not intended to specify storage temperature for foodstuff.
- Standard120 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines terms related to refrigerated display cabinets used for the sale and display of foodstuffs.
It does not apply to refrigerated vending machines or cabinets intended for use in catering or similar non-retail applications.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements for periodic inspection and testing to verify the integrity for further service of hoop-wrapped and fully-wrapped composite transportable gas cylinders and tubes, with aluminium-alloy, steel or non-metallic liners or of linerless construction (Types 2, 3, 4, and 5), intended for compressed, liquefied or dissolved gases under pressure, of water capacity from 0,5 l up to 3 000 l.
This document addresses the periodic inspection and testing of composite cylinders and tubes constructed according to ISO 11119-1, ISO 11119-2, ISO 11119-3, ISO 11119-4 or ISO 11515. It can be applied to other composite cylinders and tubes designed to comparable standards when authorized by the competent authority. As far as practicable, this document can also be applied to cylinders of less than 0,5 l water capacity when authorized by the manufacturer.
NOTE Unless noted by exception, the use of the word “cylinder” in this document refers to both cylinders and tubes.
- Standard48 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard defines the key actors in the eCall chain of service provision as:
1) In-Vehicle System (IVS)/vehicle,
2) Mobile network Operator (MNO),
3) Public safety assistance point [provider](PSAP),
in some circumstances may also involve:
4) Third Party Service Provider (TPSP),
and to provide conformance tests for actor groups 1) - 4).
NOTE Conformance tests are not appropriate nor required for vehicle occupants, although they are the recipient of the service.
This European Standard covers conformance testing (and approval) of new engineering developments, products and systems, and does not imply testing associated with individual installations in vehicles or locations.
- Standard264 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements for periodic inspection and testing to verify the integrity for further service of hoop-wrapped and fully-wrapped composite transportable gas cylinders and tubes, with aluminium-alloy, steel or non-metallic liners or of linerless construction (Types 2, 3, 4, and 5), intended for compressed, liquefied or dissolved gases under pressure, of water capacity from 0,5 l up to 3 000 l.
This document addresses the periodic inspection and testing of composite cylinders and tubes constructed according to ISO 11119-1, ISO 11119-2, ISO 11119-3, ISO 11119-4 or ISO 11515. It can be applied to other composite cylinders and tubes designed to comparable standards when authorized by the competent authority. As far as practicable, this document can also be applied to cylinders of less than 0,5 l water capacity when authorized by the manufacturer.
NOTE Unless noted by exception, the use of the word “cylinder” in this document refers to both cylinders and tubes.
- Standard48 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies discharge, handling operations and emergency procedures for rail tankers used for the transport of liquefied petroleum gas (LPG).
This document applies to operations where LPG is off-loaded from rail tankers into LPG fixed storage facilities and road tankers.
This document includes limitations to limit the discharge of rail tankers into other rail tankers.
This document does not apply to "tank containers" and "batteries of receptacles".
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies minimum requirements for the inspection and testing of the LPG road tanker, which includes its pressure vessel, accessories and vehicle LPG equipment.
This document does not specify requirements for the initial inspection (after manufacture) of a pressure vessel, see EN 12493, or for service equipment on the road tanker, see EN 12252.
This document does not apply to compartmented road tankers.
NOTE 1 There is no upper size limit for the pressure vessel as this will be determined by the gross vehicle weight limitation.
NOTE 2 For inspection and testing requirements of equipment other than the pressure vessel, accessories and vehicle LPG equipment, see applicable regulations.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies minimum requirements for the inspection and testing of the LPG road tanker, which includes its pressure vessel, accessories and vehicle LPG equipment.
This document does not apply to compartmented road tankers.
NOTE 1 There is no upper size limit for the pressure vessel as this will be determined by the gross vehicle weight limitation.
NOTE 2 For further information on inspection and testing requirements of equipment other than the pressure vessel, accessories and vehicle LPG equipment, see applicable regulations.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day