59.080 - Products of the textile industry
ICS 59.080 Details
Products of the textile industry
Produkte der Textilindustrie
Produits de l'industrie textile
Izdelki tekstilne industrije
General Information
Frequently Asked Questions
ICS 59.080 is a classification code in the International Classification for Standards (ICS) system. It covers "Products of the textile industry". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 4185 standards classified under ICS 59.080 (Products of the textile industry). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 59.080 - Products of the textile industry
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies a method for the determination of the puncture resistance by measuring the force required to push a flat-ended plunger through geosynthetics. The test is normally carried out on dry specimens conditioned in the specified atmosphere. The test is applicable to most types of geosynthetic products, but does not apply to products with apertures greater than 10 mm.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
This document specifies a test method for the determination of total amount of halogens (including fluorine, chlorine, bromine and iodine) present in textile products by combustion and ion chromatography (C-IC). This document is applicable to all materials of textile products which are combustible, e.g. fibres, fabrics, plastic components (including coating), wood.
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document specifies methods for the determination of seam maximum force of sewn seams when the force is applied perpendicularly to the seam. It describes the method known as the grab test.
The method defined in this document is applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical or chemical treatment. It can be applicable to fabrics produced by other techniques. It is normally not applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics and fabrics made from carbon fibres or polyolefin tape yarns.[2], [3], [4]
This method is applicable to straight seams only (obtained from previously sewn articles or prepared from fabric samples) and not to curved seams (see Annex B for considerations on seams).
The method is restricted to the use of constant-rate-of-extension (CRE) testing machines.
- Draft16 pagesEnglish languagee-Library read for1 day
This document specifies methods for the determination of seam maximum force of sewn seams when the force is applied perpendicularly to the seam. It describes the method known as the grab test. The method defined in this document is applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical or chemical treatment. It can be applicable to fabrics produced by other techniques. It is normally not applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics and fabrics made from carbon fibres or polyolefin tape yarns.[2], [3], [4] This method is applicable to straight seams only (obtained from previously sewn articles or prepared from fabric samples) and not to curved seams (see Annex B for considerations on seams). The method is restricted to the use of constant-rate-of-extension (CRE) testing machines.
- Standard13 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This document defines the term nonwovens and provides auxiliary terminology to distinguish nonwovens from other materials.
- Standard3 pagesEnglish languagesale 15% off
- Draft4 pagesFrench languagesale 15% off
This document specifies a test method for the determination of snagging resistance of a fabric using a mace (spiked ball).
This test method is applicable to knitted and to woven fabrics.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies test methods to measure the amount of test liquid (simulated urine) which runs down a nonwoven test specimen when a specified mass of test liquid is poured on the nonwoven test specimen superimposed on a standard absorbent medium and placed on an inclined plane.
This document is designed to compare run-off of nonwovens. It is not intended to simulate in use conditions for finished products.
The three methods are:
a) Option A - basic method for testing hydrophilic nonwovens, see Annex A.
b) Option B - repeated test, with the same test parameters as the basic method with additional information
in Option A, see Annex B.
c) Option C - modified method for testing hydrophobic nonwovens specifying another degree of incline, see Annex C.
The test method is designed to measure the repellency of hydrophobic nonwovens. At the standard inclination angle, Option A isn’t able to distinguish between different levels of hydrophobicity. By decreasing the inclination of the table, one can assess the difference in repellence of hydrophobic nonwovens.
For R&D purposes, other characteristics can be measured according to Annex D.
- Standard22 pagesEnglish languagee-Library read for1 day
IEC 63430:2025 specifies a container format for sensing data and its system requirements. This document applies to edge computing devices such as smartphones, home gateways, multimedia coordinators, etc., and cloud systems.
This document describes the following technical specifications:
- container format for wearable sensor data;
- Schema Repository that defines the parameters and syntax of sensor data;
- communication and system requirements between the edge computing device and Schema Repository.
- Standard29 pagesEnglish languagee-Library read for1 day
- Amendment5 pagesEnglish languagee-Library read for1 day
This document defines terms related to the functions, products, and properties in geosynthetics, and terms used in International Standards on geosynthetics.
- Standard17 pagesEnglish languagee-Library read for1 day
- Corrigendum3 pagesEnglish languagee-Library read for1 day
ISO 9073-11 describes test methods for measuring the quantity of test liquid (simulated urine) which runs down a nonwoven test piece when a specified mass of test liquid is poured on to the nonwoven test piece superimposed on a standard absorbent media and placed on an inclined plane.
This test method is designed to compare run-off of nonwovens. It is not intended to simulate in-use conditions of finished products.
Three alternative methods are described:
Test I -- the basic method for testing hydrophilic nonwovens;
Test III -- the repeated test, with the same test parameters as in I);
Test III -- the modified method for testing hydrophobic nonwovens specifying another table inclination than in I).
- Standard22 pagesEnglish languagee-Library read for1 day
This document specifies a test method for the determination of snagging resistance of a fabric using a mace (spiked ball).
This test method is applicable to knitted and to woven fabrics.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies test methods to measure the amount of test liquid (simulated urine) which runs down a nonwoven test specimen when a specified mass of test liquid is poured on the nonwoven test specimen superimposed on a standard absorbent medium and placed on an inclined plane. This document is designed to compare run-off of nonwovens. It is not intended to simulate in use conditions for finished products. The three methods are: a) Option A - basic method for testing hydrophilic nonwovens, see Annex A. b) Option B - repeated test, with the same test parameters as the basic method with additional information in Option A, see Annex B. c) Option C - modified method for testing hydrophobic nonwovens specifying another degree of incline, see Annex C. The test method is designed to measure the repellency of hydrophobic nonwovens. At the standard inclination angle, Option A isn’t able to distinguish between different levels of hydrophobicity. By decreasing the inclination of the table, one can assess the difference in repellence of hydrophobic nonwovens. For R&D purposes, other characteristics can be measured according to Annex D.
- Standard15 pagesEnglish languagesale 15% off
- Standard16 pagesFrench languagesale 15% off
This document specifies a test method for the determination of snagging resistance of a fabric using a mace (spiked ball). This test method is applicable to knitted and to woven fabrics.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
This document specifies a test method for determining the resistance to water leakage and penetration of water-resistant clothing in an artificial rainfall using a manikin capable of marching motion. It determines the waterproof characteristic in practical use in a rainfall environment with the wearer moving. In addition to personal protective equipment and outdoor clothing, which require extreme conditions, it also applies to testing common waterproof or water-repellent products such as jackets, trousers, coats, and one- or two-piece suits. The test method described in this document uses manikin with normal adult male size, excluding other sizes (female, children).
- Standard12 pagesEnglish languagesale 15% off
- Corrigendum3 pagesEnglish languagee-Library read for1 day
This document defines terms related to the functions, products, and properties in geosynthetics, and terms used in International Standards on geosynthetics.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies a method for the qualification and quantification of certain quinoline derivatives in textile products by means of extraction with methanol and gas chromatography with mass selective detector or liquid chromatography with mass selective detector.
The method is applicable to all kinds of textile products consisting of natural or artificially dyed textile fibres and fabrics. It is further applicable to dyestuff powder used as textile auxiliary for dyeing and printing.
- Standard24 pagesEnglish languagee-Library read for1 day
This document defines terms related to the functions, products, and properties in geosynthetics, and terms used in International Standards on geosynthetics.
- Standard8 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
This document specifies a method for the measurement of surface burning time of textile fabrics which have a raised fibre surface, i.e. a napped, pile, tufted, flocked or similar surface.
- Standard11 pagesEnglish languagesale 15% off
This document specifies a method for the qualification and quantification of certain quinoline derivatives in textile products by means of extraction with methanol and gas chromatography with mass selective detector or liquid chromatography with mass selective detector.
The method is applicable to all kinds of textile products consisting of natural or artificially dyed textile fibres and fabrics. It is further applicable to dyestuff powder used as textile auxiliary for dyeing and printing.
- Standard24 pagesEnglish languagee-Library read for1 day
This document specifies a method for the qualification and quantification of certain quinoline derivatives in textile products by means of extraction with methanol and gas chromatography with mass selective detector or liquid chromatography with mass selective detector. The method is applicable to all kinds of textile products consisting of natural or artificially dyed textile fibres and fabrics. It is further applicable to dyestuff powder used as textile auxiliary for dyeing and printing.
- Standard16 pagesEnglish languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
This document specifies a method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of extractable N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMAC), N-methyl-2-pyrrolidone (NMP) and N-ethyl-2-pyrrolidone (NEP) in filaments and coatings of textile products.
- Standard13 pagesEnglish languagee-Library read for1 day
- Amendment9 pagesEnglish languagee-Library read for1 day
This document defines the principal terms used to describe the various forms into which textile fibres can be assembled, up to and including cabled yarns. It contains only terms of general application. Terms and definitions which are specific to particular fibres (such as hemp, silk, textile glass fibre, metal fibre, carbon fibre, etc.) are excluded. A morphological scheme as shown in REF Annex_sec_A \r \h Annex A 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000C00000041006E006E00650078005F007300650063005F0041000000 is included which illustrates the relationship among various terms from a production point of view. This document does not include terms which describe the manufacturing or processing methods, or terms used to quantify fibre and yarn properties.
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
IEC 63203-201-4:2024 specifies a test procedure to measure the sheet resistance of conductive fabrics after abrasion treatment using the Martindale abrasion machine.
This document is applicable to woven, knitted conductive fabrics, conductive nonwovens, coated conductive fabrics, and embroidery fabrics using conductive yarns.
- Standard20 pagesEnglish languagesale 15% off
- Standard21 pagesEnglish and French languagesale 15% off
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
- Standard4 pagesEnglish and French languagesale 15% off
This document specifies a method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of extractable N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMAC), N-methyl-2-pyrrolidone (NMP) and N-ethyl-2-pyrrolidone (NEP) in filaments and coatings of textile products.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies two methods of indicating the composition of yarns, whether single, folded, cabled or multiple wound. The notation comprises linear density indicated in the Tex system, number of filaments in filament yarns, direction and amount of twist, and number of folds. This document is not applicable to some special kinds of yarns, for example to fancy yarns, textured or bulked yarns or yarns produced by wrapping a textile or non-textile material round a core. It is not applicable to yarns with other features such as constituent fibres, after treatment and type of package.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
This document specifies a method for the evaluation of a substrate's resistance to absorption of a selected series of liquid hydrocarbons of different surface tensions.
This document provides guidance to oil stain resistance. It can provide a rough index of oil stain resistance as, generally, the higher the oil repellency grade, the better resistance to staining by oily materials, especially liquid oil substances. This is particularly true when comparing various finishes for a given substrate. This document can also be used to determine if washing and/or drycleaning treatments have any adverse effect on the oil repellency characteristics of a substrate.
NOTE 1 Washing and drycleaning treatment procedures are described in ISO 6330 and ISO 3175 (all parts), respectively.
This document is not intended to give an absolute measure of the resistance of the substrate to staining by all oily materials. Other factors, such as composition and viscosity of the oily substances, substrate construction, fibre type, dyes and other finishing agents, also influence stain resistance. This document is not intended to estimate the resistance to penetration of the substrate by oil-based chemicals.
NOTE 2 For the evaluation of the resistance to penetration of the substrate by oil-based chemicals, see ISO 6530.
- Standard15 pagesEnglish languagee-Library read for1 day
- Amendment9 pagesEnglish languagee-Library read for1 day
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document specifies a method for measuring the time of liquid (simulated urine) strike-through for nonwoven coverstocks. The method is suitable for making comparisons between different nonwoven coverstocks. It does not simulate in-use conditions for finished products.
- Standard12 pagesEnglish languagee-Library read for1 day
This document specifies a method for the evaluation of a substrate's resistance to absorption of a selected series of liquid hydrocarbons of different surface tensions.
This document provides guidance to oil stain resistance. It can provide a rough index of oil stain resistance as, generally, the higher the oil repellency grade, the better resistance to staining by oily materials, especially liquid oil substances. This is particularly true when comparing various finishes for a given substrate. This document can also be used to determine if washing and/or drycleaning treatments have any adverse effect on the oil repellency characteristics of a substrate.
NOTE 1 Washing and drycleaning treatment procedures are described in ISO 6330 and ISO 3175 (all parts), respectively.
This document is not intended to give an absolute measure of the resistance of the substrate to staining by all oily materials. Other factors, such as composition and viscosity of the oily substances, substrate construction, fibre type, dyes and other finishing agents, also influence stain resistance. This document is not intended to estimate the resistance to penetration of the substrate by oil-based chemicals.
NOTE 2 For the evaluation of the resistance to penetration of the substrate by oil-based chemicals, see ISO 6530.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies a method for the evaluation of a substrate's resistance to absorption of a selected series of liquid hydrocarbons of different surface tensions. This document provides guidance to oil stain resistance. It can provide a rough index of oil stain resistance as, generally, the higher the oil repellency grade, the better resistance to staining by oily materials, especially liquid oil substances. This is particularly true when comparing various finishes for a given substrate. This document can also be used to determine if washing and/or drycleaning treatments have any adverse effect on the oil repellency characteristics of a substrate. NOTE 1 Washing and drycleaning treatment procedures are described in ISO 6330 and ISO 3175 (all parts), respectively. This document is not intended to give an absolute measure of the resistance of the substrate to staining by all oily materials. Other factors, such as composition and viscosity of the oily substances, substrate construction, fibre type, dyes and other finishing agents, also influence stain resistance. This document is not intended to estimate the resistance to penetration of the substrate by oil-based chemicals. NOTE 2 For the evaluation of the resistance to penetration of the substrate by oil-based chemicals, see ISO 6530.
- Standard7 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
This document specifies a test method for the determination of the biodegradability of the hydrolysate of textile materials obtained after accelerated hydrolysis under controlled composting conditions, by measurement of the amount of evolved carbon dioxide with a gas chromatography or non-dispersive infrared. This test method can be applied to petroleum-based, man-made biodegradable textile materials which are manufactured from polyethylene terephthalate succinate, polycaprolactone, polypropylene carbonate, polybuthylene succinate or copolymer using them.
- Standard12 pagesEnglish languagesale 15% off
This document specifies a method for measuring the time of liquid (simulated urine) strike-through for nonwoven coverstocks. The method is suitable for making comparisons between different nonwoven coverstocks. It does not simulate in-use conditions for finished products.
- Standard12 pagesEnglish languagee-Library read for1 day
This document specifies a method for measuring the time of liquid (simulated urine) strike-through for nonwoven coverstocks. The method is suitable for making comparisons between different nonwoven coverstocks. It does not simulate in-use conditions for finished products.
- Standard5 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
This document specifies a test method for determining the screen-touch properties of fabrics. The method is applicable to all types of fabrics intended for use in products that serve as an interface when handling touchscreens.
- Standard22 pagesEnglish languagee-Library read for1 day
This document specifies a method to determine the resistance of geosynthetics to dynamic penetration by a steel cone dropped from a fixed height.
The method is generally applicable to geosynthetics. However, the applicability of this test for some types of products (such as e.g. GGR,GCE, GST,GBR) should be considered carefully .
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies a method to determine the resistance of geosynthetics to dynamic penetration by a steel cone dropped from a fixed height.
The method is generally applicable to geosynthetics. However, the applicability of this test for some types of products (such as e.g. GGR,GCE, GST,GBR) should be considered carefully .
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies requirements and recommendations to laboratories that perform extraction of polymerase chain reaction (PCR) quality deoxyribonucleic acid (DNA) from cottonseed, cotton leaf and raw material derived therefrom, that is sufficient for the purpose of PCR analysis. This document is applicable to: a) identifying cotton raw material from which PCR quality DNA can be extracted; b) specifying a method for effective DNA extraction from cotton and cotton-derived raw materials; c) specifying the cotton-specific marker(s) to be used as controls for PCR amplification of DNA. A PCR result obtained from analysis of cottonseed, cotton leaf and to some extant raw materials derived therefrom can only indicate that it is not derived from pure genetically modified organism (GMO)-derived cotton. Admixtures of GMO-derived cotton cannot be detected for cotton fibre and cotton fibre-derived materials. This document does not apply to bulk sampling of the seed, bale or processed fabric and yarn. A recommended sampling method is given in ISO 6497. General guidance for the sampling of bulk materials or for cotton-based products is available in standards such as ASTM D1441-12 and CEN/TS 15568.
- Standard21 pagesEnglish languagesale 15% off
- Standard23 pagesFrench languagesale 15% off
This document specifies a method to determine the resistance of geosynthetics to dynamic penetration by a steel cone dropped from a fixed height. The method is generally applicable to geosynthetics. However, the applicability of this test for some types of products (such as e.g. GGR,GCE, GST,GBR) should be considered carefully .
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document specifies a test method for the quantitative determination of the antifungal activity by measuring the intensity of luminescence produced by an enzymatic reaction [adenosine triphosphate (ATP) method]. This document is applicable to various kinds of textile products, such as fibres, yarns, fabrics, clothing, bedclothes, home furnishings and other miscellaneous goods.
- Standard19 pagesEnglish languagesale 15% off
- Standard20 pagesFrench languagesale 15% off
This document specifies gas chromatography (GC) test methods for the deodorant testing of all textile products. These methods apply to odour component chemicals, such as indole, isovaleric acid and nonenal. Two methods are described in this document. — Method A (single analysis) where an odour chemical is applied in a container avoiding contact with a test specimen. — Method B (auto-regeneration) where an odour chemical is applied in a container avoiding contact with a test specimen multiple times to repeatedly challenge a test specimen.
- Standard14 pagesEnglish languagesale 15% off
This document specifies a method for determining the resistance to mechanical penetration of nonwoven fabrics by a ball of a given diameter.
The method is primarily designed to be used on nonwovens with some degree of elasticity, for which a regular burst test does not apply.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies a test method, including the degradation of certain side-chain fluorinated polymers during the extraction with simultaneous alkaline hydrolysis, and using liquid chromatography (LC) and tandem mass spectrometry (MS/MS) for identification and quantification of certain per- and polyfluoroalkyl substances (PFAS). The document is applicable to all materials of textile products.
Table 2 indicates a list of target PFAS which can be analysed with this document. PFAS of Table 2 marked with the footnote e) and footnote f) undergo alkaline hydrolysis and only their per- or polyfluorinated degradation products such as PFOA or n:2 fluorotelomer alcohols (n:2 FTOHs, n = 4, 6, 8, 10) can be determined.
Through the methods outlined in the informative Annex E and Annex F, free n:2 FTOHs, PFOA and non-polymeric PFAS of Table 2 marked with the footnote e) and footnote f), that are not stable to alkaline hydrolysis, can be identified and quantified.
Certain side-chain fluorinated polymers release n:2 FTOHs (n = 4, 6, 8, 10) under the described extraction conditions. Since these side-chain fluorinated polymers can be PFOA or C9-C14 PFCA-related substances restricted by the EU-POPs [1] or EU-REACH [2] regulations, the amounts of released n:2 FTOHs can be used to indirectly assess whether the concentration of the aforementioned side-chain fluorinated polymers exceed limits for PFOA or C9-C14 PFCA-related substances.
This document is also applicable to the determination of further PFAS, provided that the method is validated with the additional substances and that these PFAS are stable to alkaline hydrolysis and dehydrofluorination.
- Standard40 pagesEnglish languagee-Library read for1 day
This document specifies methods for the evaluation of some aspects of the behaviour of nonwoven fabrics in the presence of liquids. In particular:
— the liquid absorbency time;
— the liquid absorptive capacity;
— the liquid wicking rate (capillarity).
The different aspects of absorbency can relate to various end uses of the tested products.
The tests do not apply to any fabric containing super absorbent materials.
- Standard16 pagesEnglish languagee-Library read for1 day