1907/2006 - Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC

This document specifies a method for the simulation of accelerated wear and corrosion, to be used prior
to the detection of nickel release from coated articles that come into direct and prolonged contact with
the skin. According to the Commission Regulation (EC) No 1907/2006 (REACH), articles with an outer
coating containing nickel and those which are inserted into pierced ears and other parts of the human
body are excluded from the scope of this document.

This document specifies a method for simulating the release of nickel from those parts of spectacle frames and sunglasses intended to come into direct and prolonged contact with the skin in order to determine whether they release nickel at a rate greater than 0,5 µg/cm2/week.

This European Standard specifies the reference method for the testing of spectacle frames, ready-to-wear spectacles, sunglasses and other items for eye and face protection for nickel release.
The reference method supports the demonstration of conformity with the limit value for nickel release of 0,5 µg/cm2/week set forth by European Regulation.
The reference method involves the procedural steps shown in Figure 1 and described in Clause 4.
This document applies to those parts of metal spectacle frames and those metal parts of combination spectacle frames that are intended to come into direct and prolonged contact with the skin of the wearer. This document also applies to those relevant metal parts of ready-to-wear spectacles, sunglasses and other items for eye and face protection.
NOTE   The reference method for articles apart from spectacle frames, ready-to-wear spectacles, sunglasses and other items for eye and face protection is specified in EN 1811.

This European Standard specifies a method for simulating the release of nickel from all post assemblies which are inserted into pierced ears and other pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin in order to determine whether such articles are in compliance with No. 27 Annex XVII of Regulation (EC) No 1907/2006 of the European Parliament and of the Council (REACH).
Spectacle frames and sunglasses are excluded from the scope of this European Standard.
NOTE   Spectacle frames and sunglasses are subject to the requirements of EN 16128:2011 which provides an unchanged re-publication of the technical requirements that had previously been specified in EN 1811:1998, but restricted in scope to apply only to spectacle frames and sunglasses.

This European Standard specifies a method for simulating the release of nickel from all post assemblies which are inserted into pierced ears and other pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin in order to determine whether such articles are in compliance with No. 27 Annex XVII of Regulation (EC) No 1907/2006 of the European Parliament and of the Council (REACH).
Spectacle frames and sunglasses are excluded from the scope of this European Standard.
NOTE   Spectacle frames and sunglasses are subject to the requirements of EN 16128:2011 which provides an unchanged re-publication of the technical requirements that had previously been specified in EN 1811:1998, but restricted in scope to apply only to spectacle frames and sunglasses.

This document specifies a method for the simulation of accelerated wear and corrosion, to be used prior to the detection of nickel release from coated articles that come into direct and prolonged contact with the skin. According to the Commission Regulation (EC) No 1907/2006 (REACH), articles with an outer coating containing nickel and those which are inserted into pierced ears and other parts of the human body are excluded from the scope of this document.

This European Standard specifies a method for simulating the release of nickel from all post assemblies which are inserted into pierced ears and other pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin in order to determine whether such articles are in compliance with the Commission Regulation (EC) No 552/2009 amending Regulation (EC) No 1907/2006 on REACH as regards Annex XVII. Spectacle frames and sunglasses are excluded from the scope of this European Standard. NOTE Spectacle frames and sunglasses are subject to the requirements of EN 16128:2011 which provides an unchanged re-publication of the technical requirements that had previously been specified in EN 1811:1998, but restricted in scope to apply only to spectacle frames and sunglasses.

This European Standard specifies a method for simulating the release of nickel from all post assemblies which are inserted into pierced ears and other pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin in order to determine whether such articles are in compliance with the Commission Regulation (EC) No 552/2009 amending Regulation (EC) No 1907/2006 on REACH as regards Annex XVII. Spectacle frames and sunglasses are excluded from the scope of this European Standard. NOTE Spectacle frames and sunglasses are subject to the requirements of EN 16128:2011 which provides an unchanged re-publication of the technical requirements that had previously been specified in EN 1811:1998, but restricted in scope to apply only to spectacle frames and sunglasses.

This European Standard specifies a method for accelerated wear and corrosion, to be used prior to the detection of nickel release from coated items that come into direct and prolonged contact with the skin.

Azo colorants that are able to form 4-aminoazobenzene, generate under the conditions of EN 14362-1 the
amines aniline and 1,4-phenylenediamine. The presence of these 4-aminoazobenzene colorants cannot be
reliably ascertained without additional information (e.g. the chemical structure of the colorant used) or without
a special procedure.
This part of EN 14362 is supplementary to Part 1 and describes a special procedure to detect the use of
certain azo colorants in commodities, which may release 4-aminoazobenzene,
- accessible to reducing agent without extraction, particularly concerning textiles made of cellulose and
protein fibres (e.g. cotton, viscose, wool, silk);
- accessible by extracting the fibres (e.g. polyester or imitation leather).
For certain fibre blends both parts of this standard (without or with extraction) may need to be applied.
The procedure detects as well 4-aminoazobenzene (Solvent Yellow 1) which is already available as free
amine in commodities without reducing pre-treatment.
The use of certain azo colorants, which may release by reductive cleavage of their azo group(s) one or more
of the other aromatic amines listed in the Regulation (EC) No 1907/2006 of the European Parliament and of
the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) as regards
Annex XVII, except 4-aminoazobenzene, cannot be determined quantitatively with this method.

This European Standard describes a procedure to detect the use of certain azo colorants that may not be used in the manufacture or treatment of certain commodities made of textile fibres and that are accessible to reducing agent with and without extraction.
Azo colorants accessible to reducing agent without extraction are those used to dye:
   cellulosic fibres (e.g. cotton, viscose);
   protein fibres (e.g. wool, silk);
   synthetic fibres (e.g. polyamide, acrylic).
Azo colorants accessible with extraction are those used to dye man-made fibres with disperse dyes. The following man-made fibres can be dyed with disperse dyes: polyester, polyamide, acetate, triacetate, acrylic and chlorofibre.
For certain commodities made of cellulose and/or protein fibres blended with man-made fibres it is necessary to extract the dye first.
The method is relevant for all coloured textiles, e.g. dyed, printed and coated textiles.

This document specifies the reference method for the testing of spectacle frames, ready-to-wear spectacles, sunglasses and other items for eye and face protection for nickel release. The reference method supports the demonstration of conformity with the limit value for nickel release of 0,5 μg/cm2/week set forth by European Regulation. The reference method involves the procedural steps shown in Figure 1 and described in Clause 4. This document applies to those parts of metal spectacle frames and those metal parts of combination spectacle frames that are intended to come into direct and prolonged contact with the skin of the wearer. This document also applies to those relevant metal parts of ready-to-wear spectacles, sunglasses and other items for eye and face protection. NOTE The reference method for articles apart from spectacle frames, ready-to-wear spectacles, sunglasses and other items for eye and face protection is specified in EN 1811.

This European Standard specifies a method for simulating the release of nickel from those parts of spectacle frames and sunglasses intended to come into direct and prolonged contact with the skin in order to determine whether they release nickel at a rate greater than 0,5 µg/cm2/week.
NOTE 1   This European Standard, FprEN 16128, has been prepared in reply to the European Commission's Mandate M/448 addressed to CEN. From the technical point of view, this European Standard provides an unchanged re-publication of the technical requirements that had previously been specified in EN 1811:1998, but restricted in scope to apply only to spectacle frames and sunglasses.
NOTE 2   Users of this European Standard may wish to note that, also in reply to the European Commission's Mandate M/448, this European Standard is currently subject to review with the objective of developing a new standardized method to supersede this European Standard when the new method becomes available.
NOTE 3   Nickel release testing of products other than spectacle frames and sunglasses is specified in prEN 1811:2009.

This document specifies the reference method for the testing of spectacle frames and sunglasses for nickel release.
The reference method supports the demonstration of conformity with the limit value for nickel release of 0,5 µg/cm2/week set forth by European Regulation and makes provision for a uniform application and control of the European legislation in all member states.
The reference method involves the following procedural steps (see also Clause 4):
-   Simulation of wear and corrosion;
-   EIS coating test (optional);
-   Laboratory test: Release of nickel and its quantitative analytical detection.
This document applies to those parts of metal spectacle frames and those metal parts of combination spectacle frames that come into direct and prolonged contact with the skin of the wearer. This document also applies to those relevant metal parts of articles for eye and face protection, including sunglasses.
The EIS coating test method can be applied only to metal parts which have been coated with an organic, electrically insulating, layer.
This document does not apply to products other than spectacle frames and articles for eye and face protection, which includes sunglasses.
NOTE   The reference method for products other than spectacle frames and of articles for eye and face protection, including sunglasses is specified in EN 1811:2011.

This European Standard specifies a method for simulating the release of nickel from those parts of spectacle frames and sunglasses intended to come into direct and prolonged contact with the skin in order to determine whether they release nickel at a rate greater than 0,5 µg/cm2/week.
NOTE 1   This European Standard, EN 16128, has been prepared in reply to the European Commission's Mandate M/448 addressed to CEN. From the technical point of view, this European Standard provides an unchanged re-publication of the technical requirements that had previously been specified in EN 1811:1998, but restricted in scope to apply only to spectacle frames and sunglasses.
NOTE 2   Users of this European Standard may wish to note that, also in reply to the European Commission's Mandate M/448, this European Standard is currently subject to review with the objective of developing a new standardized method to supersede this European Standard when the new method becomes available.
NOTE 3   Nickel release testing of products other than spectacle frames and sunglasses is specified in prEN 1811:2009.

This European Standard specifies a method for simulating the release of nickel from all post assemblies which are inserted into pierced ears and other pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin in order to determine whether such items are in compliance with the European Directive 76/769/EEC as amended by 94/27/EC and 2004/96/EC. DRAFTING REMARK Subject to the final positive decision of the European Commission, CEN/TC 347/TG 1 supports the following wording to be included in the scope of this standard: Spectacle frames and sunglasses are excluded from the scope of this European Standard.

This European Standard specifies a method for simulating the release of nickel from all post assemblies which are inserted into pierced ears and other pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin in order to determine whether such items are in compliance with the European Directive 76/769/EEC as amended by 94/27/EC and 2004/96/EC. DRAFTING REMARK Subject to the final positive decision of the European Commission, CEN/TC 347/TG 1 supports the following wording to be included in the scope of this standard: Spectacle frames and sunglasses are excluded from the scope of this European Standard.

CEN/TC - Modifications in list entries 5.8 and 5.9.

This European Standard specifies a method for simulating the release of nickel from all post assemblies which are inserted into pierced ears and other pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin in order to determine whether such articles are in compliance with the Commission Regulation (EC) No 552/2009 amending Regulation (EC) No 1907/2006 on REACH as regards Annex XVII.
Spectacle frames and sunglasses are excluded from the scope of this European Standard.
NOTE   Spectacle frames and sunglasses are subject to the requirements of EN 16128:2011 which provides an unchanged re-publication of the technical requirements that had previously been specified in EN 1811:1998, but restricted in scope to apply only to spectacle frames and sunglasses.

This European Standard specifies a method for accelerated wear and corrosion, to be used prior to the detection of nickel release from coated items that come into direct and prolonged contact with the skin.