SIST EN 17971:2024
(Main)Devices for in-situ generation of biocides - Ozone
Devices for in-situ generation of biocides - Ozone
The European standards on “In-situ generation and dosing devices of biocides for water treatment” will specify product characteristics and operational schemes. Assessment methods and test specifications for the devices will be described. Furthermore risk notes and mitigation measures will be covered by the standards.
Scope of application of the devices will not be limited to the treatment of drinking water and/or swimming pool water. Scope of application will be treatment of water, covering different kind of water qualities and treatment for different uses of water (drinking, swimming, cooling, etc.).
Anlagen zur In-Situ Erzeugung von Bioziden - Ozon
Dieses Dokument ist anwendbar auf Anlagen zur Erzeugung und Dosierung des Biozids Ozon. Das Ozon wird in diesen Anlagen nach der Technologie der stillen elektrischen Entladung erzeugt. Nach EN1278 und EN15074 ist Ozon für die Aufbereitung von Wasser für den menschlichen Gebrauch (Trinkwasser) bzw. für die Aufbe
reitung von Schwimm- und Badebeckenwasser geeignet. Ozon kann dem Wasser zu Desinfektions- und zu
dativen Zwecken zugesetzt werden. Die vorliegende Norm kann auch für andere Technologien zur Erzeugung von Ozon, z.B. Elektrolyse oder UV-Bestrahlung, angewendet werden, soweit dies sinnvoll oder anwendbar ist.
Diese Norm legt die Herstellung der Anlage und die Prüfverfahren für die Ausrüstung zur In-situ-Erzeugung von Ozon fest. Sie gibt die Anforderungen an Montage-, Betriebs- und Wartungsanleitungen sowie Sicherheits
anweisungen und an die mit dem Produkt zu liefernde Dokumentation an.
Die In-situ-Erzeugung von Wirkstoffen, insbesondere von Ozon, unterliegt den Angaben der Biozid- Verordnung(EU)528/2012(BPR)[10]. Die Verwendung von Ozon zum Zweck der Desinfektion/mikrobio
logischen Konservierung von Wasser erfordert die Einhaltung der Bestimmungen der BPR, insbesondere den Zugang des Nutzers oder seines Anlagenherstellers zu einem für die Zulassung von Ozon nach der BPR erforderlichen Datensatz.
Die In-situ-Erzeugung von Ozon zum überwiegenden Zweck der Oxidation von Wasserinhaltsstoffen unterliegt den Vorgaben der Verordnung(EG)Nr.1907/2006 zur Registrierung, Bewertung, Zulassung und Beschrän
kung chemischer Stoffe (REACH)[11]. Die Verwendung zu Oxidationszwecken setzt voraus, dass der Nutzer Zugriff auf den Datensatz hat, der für die Zulassung von Ozon unter REACH vorgesehen ist.
Dispositifs de génération de biocides in situ - Ozone
Le présent document est applicable aux dispositifs de génération et de dosage d’ozone utilisé comme biocide. L’ozone est généré dans ces dispositifs selon la technologie de décharge à barrière diélectrique. Conformément à l’EN 1278 et à l’EN 15074, l’ozone est adapté au traitement de l’eau destinée à la consommation humaine (eau potable) et au traitement de l’eau des piscines, respectivement. De l’ozone peut être ajouté à l’eau à des fins de désinfection et d’oxydation. La présente norme peut également s’appliquer à d’autres technologies de génération d’ozone, telles que l’électrolyse ou le rayonnement UV, dans la limite du raisonnable ou du possible.
La présente norme spécifie la construction des dispositifs, ainsi que les méthodes d’essai pour l’équipement utilisé à des fins de génération in situ d’ozone. Elle spécifie les exigences relatives aux instructions d’installation, d’utilisation, de maintenance et de sécurité, ainsi qu’à la documentation à fournir avec le produit.
La génération in situ de substances actives, en particulier d’ozone, est soumise aux spécifications du Règlement sur les produits biocides (UE) 528/2012 (RPB) [10]. L’utilisation d’ozone à des fins de désinfection/préservation de la qualité microbiologique de l’eau doit être conforme aux dispositions du RPB, en particulier concernant l’accès par l’utilisateur ou le fabricant du dispositif à un ensemble d’informations exigées pour l’autorisation de l’ozone en vertu du RPB.
La génération in situ d’ozone aux fins principales d’oxydation des composants de l’eau est soumise aux spécifications du Règlement (CE) 1907/2006 concernant l’enregistrement, l’évaluation et l’autorisation des substances chimiques, ainsi que les restrictions applicables à ces substances (REACH) [11]. L’utilisation à des fins d’oxydation nécessite de mettre à la disposition de l’utilisateur l’ensemble des informations fournies dans le cadre de l’autorisation de l’ozone en vertu du règlement REACH.
Naprave za proizvodnjo biocidov na kraju samem - Ozon
Ta evropski standard o »napravah za proizvodnjo in doziranje biocidov na kraju samem za pripravo vode« bo določal značilnosti izdelka in sheme delovanja. Opisane bodo metode ocenjevanja in specifikacije preskusov za naprave. V standardih bodo zajeti tudi opombe o tveganjih in ukrepi za njihovo ublažitev.
Področje uporabe naprav ne bo omejeno na pripravo pitne in/ali bazenske vode. V področje uporabe bo zajeta priprava vode različne kakovosti in za različne namene uporabe (pitje, plavanje, ohlajevanje itd.).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Naprave za proizvodnjo biocidov na kraju samem - Ozon
Devices for in-situ generation of biocides - Ozone
Anlagen zur In-Situ Erzeugung von Bioziden - Ozon
Dispositifs de génération de biocides in situ - Ozone
Ta slovenski standard je istoveten z: EN 17971:2024
ICS:
13.060.20 Pitna voda Drinking water
13.060.25 Voda za industrijsko uporabo Water for industrial use
71.100.80 Kemikalije za čiščenje vode Chemicals for purification of
water
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17971
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2024
EUROPÄISCHE NORM
ICS 13.060.20
English Version
Devices for in-situ generation of biocides - Ozone
Dispositifs de génération de biocides in situ - Ozone Anlagen zur In-Situ Erzeugung von Bioziden - Ozon
This European Standard was approved by CEN on 19 May 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17971:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Technology of dielectric barrier discharge to generate ozone . 8
5 Distinguishing characteristics of ozone generation devices . 9
5.1 General. 9
5.2 Design type of the ozone generation devices . 9
5.3 Operating pressure . 9
5.4 Feed gas . 10
5.5 Cooling of the ozone generator . 10
6 Technical data of the ozone generation device . 10
7 Name-plate . 11
8 Equipment and materials of ozone systems . 12
8.1 General. 12
8.2 Equipment for the supply of feed gas . 12
8.3 Equipment for cooling of the ozone generator . 12
8.4 Materials . 12
8.4.1 Materials for parts in contact with feed gas . 12
8.4.2 Materials for parts in contact with ozone . 12
8.5 Electrical equipment. 12
8.6 Control and monitoring . 13
8.7 Residual ozone destructor . 13
9 Chemistry . 13
9.1 Chemistry of ozone generation . 13
9.2 Purity requirements for the feed gas . 15
9.3 Chemistry of reaction by-products of ozone generation . 16
9.4 Chemistry of by-products of ozone dosed in water . 16
10 Device for dosing ozone . 17
11 Installation site . 17
12 Cooling agent . 18
13 Operational safety requirements of ozone systems . 18
14 Operation and maintenance . 20
15 Testing of ozone generation devices for its characterization . 20
15.1 General. 20
15.2 Scope of testing . 20
15.3 Check of documentation and design . 21
16 Nominal output of the ozone generation . 21
16.1 Determination of the nominal output of the ozone generation device . 21
16.2 Determination of the volumetric flow rate Q . 22
out
16.3 Photometric determination of the ozone concentration γ by UV absorption. 23
n
16.3.1 Brief description of the method . 23
16.3.2 Procedure and evaluation . 25
16.4 Determination of the ozone concentration γ by titration . 26
n
16.4.1 Brief description . 26
16.4.2 Apparatus . 26
16.4.3 Reagents . 27
16.4.4 Procedure . 27
16.4.5 Evaluation. 29
Annex A (informative) Examples for mixing devices . 30
A.1 Mixing by injector and static mixer. 30
A.2 Multiphase pumps . 31
A.3 Direct injection and static mixer . 31
A.4 Additional mixing methods . 32
Annex B (normative) Methods to determine ozone in water . 34
B.1 DPD Method . 34
B.2 Indigo Method . 34
B.3 potentiometric Method. 35
Annex C (informative) Safety measures to prevent ozone leakages . 36
Bibliography . 38
European foreword
This document (EN 17971:2024) has been prepared by Technical Committee CEN/TC 164“Water
supply”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2024, and conflicting national standards shall
be withdrawn at the latest by December 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
Devices according to this document can be used in different fields of application, e.g. drinking water,
swimming pool water, wastewater, air treatment, surface disinfection, water reuse, irrigation water and
within food and beverage manufacturing, etc. Additional requirements to this document need to be
observed, where appropriate for the specific application.
The in situ generation of active substances, in particular ozone, is subject to the specifications of the
Biocidal Products Regulation (EU) 528/2012 (BPR) [1]. The use of ozone for the purpose of
disinfection/microbiological preservation of water implies compliance with the provisions of the BPR, in
particular access by the user or the device manufacturer to a data set required for the authorization of
ozone under the BPR.
The in situ generation of ozone for non-biocidal applications, e.g. oxidation purposes, is subject to the
specifications of the REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) [2]
Regulation (EC) 1907/2006. The use for non-biocidal purposes implies access by the user to the data set
provided for the authorization of ozone under REACH.
1 Scope
This document is applicable to devices for the generation and dosing of ozone. The ozone is generated in
these devices according to the technology of dielectric barrier discharge. According to EN 1278 and
EN 15074, ozone is suited for the use of the treatment of water intended for human consumption
(drinking water), and for the treatment of swimming pool water respectively. Ozone can be added to the
water for disinfection and for oxidative purposes. This document can also be applied for other
technologies to generate ozone, e.g. electrolysis or UV irradiation, as far as reasonable or applicable.
This document specifies device’s construction, and test methods for the equipment used for in situ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.