59.060.01 - Textile fibres in general
ICS 59.060.01 Details
Textile fibres in general
Textilfasern im allgemeinen
Fibres textiles en général
Tekstilna vlakna na splošno
General Information
Frequently Asked Questions
ICS 59.060.01 is a classification code in the International Classification for Standards (ICS) system. It covers "Textile fibres in general". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 259 standards classified under ICS 59.060.01 (Textile fibres in general). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 59.060.01 - Textile fibres in general
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
- 1 (current)
- 2
- 3
- 4
- 5
This document defines the principal terms used to describe the various forms into which textile fibres can be assembled, up to and including cabled yarns. It contains only terms of general application. Terms and definitions which are specific to particular fibres (such as hemp, silk, textile glass fibre, metal fibre, carbon fibre, etc.) are excluded. A morphological scheme as shown in REF Annex_sec_A \r \h Annex A 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000C00000041006E006E00650078005F007300650063005F0041000000 is included which illustrates the relationship among various terms from a production point of view. This document does not include terms which describe the manufacturing or processing methods, or terms used to quantify fibre and yarn properties.
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
This document specifies a test method for determining the screen-touch properties of fabrics. The method is applicable to all types of fabrics intended for use in products that serve as an interface when handling touchscreens.
- Standard22 pagesEnglish languagee-Library read for1 day
This document specifies a test method for determining the screen-touch properties of fabrics. The method is applicable to all types of fabrics intended for use in products that serve as an interface when handling touchscreens.
- Standard22 pagesEnglish languagee-Library read for1 day
This document specifies a test method for determining the screen-touch properties of fabrics. The method is applicable to all types of fabrics intended for use in products that serve as an interface when handling touchscreens.
- Standard14 pagesEnglish languagesale 15% off
- Standard14 pagesFrench languagesale 15% off
This document specifies a test method for the determination of burning behaviour of textile fibres by oxygen index. This document is only used for the purpose of testing burning behaviour of textile fibres under conditions of this test, controlling quality of the products, or studying the factors causing the fire of some particular textile fibres. It is not used for assessing fire risk in their actual use.
- Standard17 pagesEnglish languagesale 15% off
- Standard20 pagesFrench languagesale 15% off
This document specifies a quantitative measurement of chemical constituent element on carbon fibre and its textile by an elemental analyser.
- Standard6 pagesEnglish languagesale 15% off
This document specifies a method, using hypochlorite, to determine the mass percentage of protein fibre, after removal of non-fibrous matter, in textiles made of mixtures of certain non-protein fibres and certain protein fibres, as follows:
— wool, other animal-hair (such as cashmere, mohair), silk, protein,
with
— cotton, cupro, viscose, modal, acrylic, chlorofibres, polyamide, polyester, polypropylene, glass, elastane, elastomultiester, elastolefin, melamine and polypropylene/polyamide bicomponent.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies a method, using hypochlorite, to determine the mass percentage of protein fibre, after removal of non-fibrous matter, in textiles made of mixtures of certain non-protein fibres and certain protein fibres, as follows: - wool, other animal-hair (such as cashmere, mohair), silk, protein, with - cotton, cupro, viscose, modal, acrylic, chlorofibres, polyamide, polyester, polypropylene, glass, elastane, elastomultiester, elastolefin, melamine and polypropylene/polyamide bicomponent.
- Standard3 pagesEnglish languagesale 15% off
This document specifies a method for the identification, qualitative, and quantitative analysis of cashmere, wool, other speciality animal fibres, and their blends using scanning electron microscopy (SEM).
It is applicable to loose fibres, intermediate products, and final products of cashmere, wool, other speciality animal fibres, and their blends.
- Standard62 pagesEnglish languagee-Library read for1 day
This document describes the measurement for the determination of the sheet resistance of conductive textile structures or conductive structures by using eddy current technology in reflection mode setup/ arrangement.
It is applicable to conductive textile structures or conductive structures intended for application in/to textiles in the form of sheets (woven fabric, knitted fabric, nonwoven, coated fabric) where the area is formed by intersecting surfaces having conductive textile material.
It is also applicable to multilayer structures containing both insulating and conductive layers.
- Standard20 pagesEnglish languagee-Library read for1 day
- Draft15 pagesGerman languagee-Library read for1 day
This document specifies a method of determining phthalates in textiles with gas chromatography–mass spectrometry (GC-MS).
This document is applicable to textile products where there is a risk of the presence of some phthalates.
- Standard29 pagesEnglish languagee-Library read for1 day
This document specifies a method of determining phthalates in textiles with gas chromatography–mass spectrometry (GC-MS).
This document is applicable to textile products where there is a risk of the presence of some phthalates.
- Standard29 pagesEnglish languagee-Library read for1 day
This document specifies a method of determining phthalates in textiles with gas chromatography–mass spectrometry (GC-MS). This document is applicable to textile products where there is a risk of the presence of some phthalates.
- Standard21 pagesEnglish languagesale 15% off
- Standard23 pagesFrench languagesale 15% off
This document describes the measurement for the determination of the sheet resistance of conductive textile structures or conductive structures by using eddy current technology in reflection mode setup/ arrangement. It is applicable to conductive textile structures or conductive structures intended for application in/to textiles in the form of sheets (woven fabric, knitted fabric, nonwoven, coated fabric) where the area is formed by intersecting surfaces having conductive textile material. It is also applicable to multilayer structures containing both insulating and conductive layers.
- Standard12 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This document specifies a gravimetric method and a vibroscope method for the determination of the linear density of textile fibres applicable respectively to:
a) bundles of fibres;
b) individual fibres.
Useful data can be obtained on man-made fibres and, with less precision, on natural fibres.
This document only applies to fibres which can be kept straight and, in the case of bundles, parallel, during test preparation. It is properly applicable when the fibres are readily freed of crimp. The methods in this document are not applicable to tapered fibres.
The vibroscope method is not always applicable to hollow and flat (ribbon-like) fibres.
- Standard18 pagesEnglish languagee-Library read for1 day
- Draft16 pagesGerman languagee-Library read for1 day
This document specifies a method for determining the amount of certain benzotriazole compounds (UV-320, UV-327, UV-328, UV-350) in textiles by using liquid chromatography-tandem mass spectrometry (LC-MS/MS) or liquid chromatography-diode array detector (LC-DAD) or gas chromatography with mass spectrometry (GC-MS). The method is applicable to all kinds of textile materials (fibres and fabrics).
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document specifies a method, using formic acid and zinc chloride, to determine the mass percentage of viscose or certain types of cupro or modal or lyocell, after removal of non-fibrous matter, in textiles made of mixtures of
— viscose or certain types of the cupro or modal or lyocell fibres
with
— flax fibres.
This document is not applicable to mixtures in which the flax fibre has suffered extensive chemical degradation, nor when the viscose, cupro, modal or lyocell fibre is rendered incompletely soluble by the presence of certain permanent finishes or reactive dyes that cannot be removed completely.
- Standard12 pagesEnglish languagee-Library read for1 day
- Draft9 pagesGerman languagee-Library read for1 day
This document specifies a gravimetric method and a vibroscope method for the determination of the linear density of textile fibres applicable respectively to:
a) bundles of fibres;
b) individual fibres.
Useful data can be obtained on man-made fibres and, with less precision, on natural fibres.
This document only applies to fibres which can be kept straight and, in the case of bundles, parallel, during test preparation. It is properly applicable when the fibres are readily freed of crimp. The methods in this document are not applicable to tapered fibres.
The vibroscope method is not always applicable to hollow and flat (ribbon-like) fibres.
- Standard18 pagesEnglish languagee-Library read for1 day
- Draft16 pagesGerman languagee-Library read for1 day
SIGNIFICANCE AND USE
4.1 This guide is intended for use as a reference to improve the understanding of the relationship between commercial name, fiber identification and geographical regions of fiber origins that make up the composition of textile products.
4.2 This guide is intended to be used as a source of information only.
4.2.1 Detailed analysis, to verify specific data related to the composition of a particular fiber, may be necessary.
SCOPE
1.1 This guide lists fibers used to manufacture textile products.
1.2 Specific groups of fibers are identified using tables of standard classification.
1.2.1 Animal fibers are identified by commercial name, biological name, end use, and geographic source.
1.2.2 Vegetable fibers are identified by commercial name, botanical name, staple length or description, and geographic source.
1.2.3 Mineral fibers are identified by commercial name, mineralogical name, chemical description, and geographic source.
1.2.4 Manufactured fibers are identified by commercial name, generic name, and major component.
1.3 Major fiber types used for textile purposes are further classified.
1.3.1 Manufactured fibers are identified as having either an organic base or inorganic base.
1.3.2 Natural fibers are identified as having a cellulosic, protein, or mineral base.
1.4 A glossary of generic names and definitions for manufactured fibers is included as additional information.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide13 pagesEnglish languagesale 15% off
- Guide13 pagesEnglish languagesale 15% off
This document specifies a chromatographic method to determine the amount of short-chain chlorinated paraffins (SCCPs: C10-C13) and middle-chain chlorinated paraffins (MCCPs: C14-C17) in textile articles, especially in polymer of the coated fabrics, prints made of polymer and buttons made of polymer (e.g. polyvinylchloride) by means of solvent extraction and gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS).
- Standard23 pagesEnglish languagee-Library read for1 day
- Draft24 pagesGerman languagee-Library read for1 day
This document specifies a method, using formic acid and zinc chloride, to determine the mass percentage of viscose or certain types of cupro or modal or lyocell, after removal of non-fibrous matter, in textiles made of mixtures of
— viscose or certain types of the cupro or modal or lyocell fibres
with
— flax fibres.
This document is not applicable to mixtures in which the flax fibre has suffered extensive chemical degradation, nor when the viscose, cupro, modal or lyocell fibre is rendered incompletely soluble by the presence of certain permanent finishes or reactive dyes that cannot be removed completely.
- Standard12 pagesEnglish languagee-Library read for1 day
- Draft9 pagesGerman languagee-Library read for1 day
This document specifies a method, using acetone, to determine the mass percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of
— acetate
with
— wool, animal hair, silk, protein, cotton (scoured, kiered, or bleached), flax (or linen), hemp, jute, abaca, alfa, coir, broom, ramie, sisal, cupro, viscose, modal, polyamide, polyester, polypropylene, acrylic, elastolefin, elastomultiester, melamine, polypropylene/polyamide bicomponent, polyacrylate and glass fibres.
It is not applicable to mixtures containing modacrylic fibres, certain chlorofibres, nor to mixtures containing acetate fibres that have been deacetylated on the surface.
- Standard9 pagesEnglish languagee-Library read for1 day
- Draft6 pagesGerman languagee-Library read for1 day
SIGNIFICANCE AND USE
4.1 The ball seam height of a baseball or softball is a measurement that can correlate to ball grip and aerodynamic properties.
4.2 This test method is suitable for obtaining data in research and development, quality control, and classifying balls by seam type.
4.3 Sports associations can use seam height standards in specifications for official baseballs and softballs.
4.4 Users of this test method may be testing individual baseballs or softballs or entire production lots of baseballs or softballs. If a single ball or small sample of balls are being measured for individual properties, multiple measurements should be performed on the balls. If a large sample of balls is being measured for the overall seam characteristics of the large sample, then an individual seam height measurement may be recorded for a ball. Thus, number of measurement points (m) on any one ball is at the discretion of the test sponsor of this test method.
SCOPE
1.1 This test method is intended to standardize a method of measuring the seam height of baseballs and softballs.
1.2 This standard is established to provide a single, repeatable, and uniform test method.
1.3 This test method is for a ball that is intended for use in the game of baseball or softball.
1.4 Units—The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Standard5 pagesEnglish languagesale 15% off
This document specifies the method and conditions of test for the determination of the breaking force and elongation at break of individual fibres in the conditioned or wet state.
The determination of these fibre properties, when carried out on different kinds of testing equipment, will not generally give identical results. To avoid such differences, this document is restricted to the use of constant-rate-of-extension testing machine.
It is applicable to all fibres, including crimped fibres, provided that the length of fibre available enables the gauge length specified in this document.
NOTE For natural fibres (especially wool and cotton), the breaking test most commonly performed is that of bundles of fibres (see ISO 3060 and IWTO 32‑82).
- Standard20 pagesEnglish languagee-Library read for1 day
- Draft16 pagesGerman languagee-Library read for1 day
This document specifies a method, using dimethylformamide, to determine the mass percentage of acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textiles made of mixtures of
— acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres
with
— wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, polypropylene, elastomultiester, elastolefin, melamine, polypropylene/polyamide bicomponent, polyacrylate or glass fibres.
It is not applicable to animal hair, wool and silk dyed with chromium based mordant dyes.
NOTE Dyestuff identification is described in ISO 16373-1.
- Standard11 pagesEnglish languagee-Library read for1 day
- Draft8 pagesGerman languagee-Library read for1 day
This document specifies a method using hot formic acid to determine the mass percentage of melamine fibres after removal of non-fibrous matter, in textiles made of mixtures of:
— melamine fibres
with
— cotton, polypropylene or aramid fibres.
- Standard10 pagesEnglish languagee-Library read for1 day
- Draft7 pagesGerman languagee-Library read for1 day
This document specifies a method, using sulfuric acid, to determine the mass percentage of silk, after removal of non-fibrous matter, in textiles made of mixtures of
— silk
with
— wool or other animal hair.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies a chromatographic method to determine the amount of short-chain chlorinated paraffins (SCCPs: C10-C13) and middle-chain chlorinated paraffins (MCCPs: C14-C17) in textile articles, especially in polymer of the coated fabrics, prints made of polymer and buttons made of polymer (e.g. polyvinylchloride) by means of solvent extraction and gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS).
- Standard15 pagesEnglish languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
This document specifies a method for the automatic determination of the deformability of textile fabrics, including continuous-fibre reinforcement textiles. This method is not applicable to resin impregnated fabrics.
The method is suitable for use with fabrics such as woven or knitted fabrics, nonwovens, non-crimp fabrics, fabrics made of glass rovings or untwisted carbon filament yarns intended for reinforced composite materials. When applying the method to multi-axial non-crimp fabrics, the evaluation of the fibre orientation and gaps only incorporates the uppermost layer.
The method can be used for fabrics treated with powder binder.
- Standard28 pagesEnglish languagee-Library read for1 day
- Draft25 pagesGerman languagee-Library read for1 day
This document specifies a method using trichloroacetic acid and chloroform to determine the mass percentage of polyester fibres after removal of non-fibrous matter, in textiles made of mixtures of
— polyester fibres
with
— aramid fibres (except polyamide imide), flame retardant (FR) viscose and polyacrylate.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies a common method for the quantitative chemical analysis of various mixtures of fibres. This method and the methods described in the other parts of ISO 1833 are applicable, in general, to fibres in any textile form. Where certain textile forms are excepted, these are listed in the scope of the appropriate part.
- Standard28 pagesEnglish languagee-Library read for1 day
- Draft25 pagesGerman languagee-Library read for1 day
This document specifies a qualitative and quantitative procedure to determine the composition of animal hair fibre blends (made of wool, cashmere, yak, alpaca, camel or angora) by LC-MS without protein reduction.
NOTE 1 The composition of non-animal hair fibres can be measured by ISO 1833 (all parts). Both results are combined to determine the total fibre composition.
The method is based on a preliminary identification, by light microscopy, of all fibres in the blend on the basis of their morphology, according to ISO/TR 11827[4]. It is not applicable if fibres of the same animal species (such as blends of cashmere and mohair) are present.
NOTE 2 In this case, the quantitative analysis is performed using microscopical analysis [for example, ISO 17751 (all parts)].
- Standard32 pagesEnglish languagee-Library read for1 day
This document specifies methods of quantitative analysis of various ternary mixtures of fibres.
The field of application of each method for analysing mixtures, specified in the parts of ISO 1833, indicates the fibres to which the method is applicable.
This document is applicable to mixtures of fibres with more than three components provided that the combination of test methods leads back to simple cases of fibre mixtures. Table B.1 illustrates the typical ternary mixtures and their applied corresponding parts of the ISO 1833 series.
- Standard24 pagesEnglish languagee-Library read for1 day
This document describes a method, using capacitance measuring equipment, for determining the unevenness of linear density along the length of textile strands. The method is applicable to tops, slivers, rovings, spun yarns and continuous filament yarns, made from either natural or man-made fibres, in the range of 4 tex (g/km) to 80 ktex (kg/km) for staple-fibre strands and 1 tex(g/km) to 600 tex (g/km) for continuous-filament yarns. It is not applicable to fancy yarns or to strands composed fully or partly of conductive materials such as metals; the latter requires an optical sensor (see A.4), and to raw silk filaments which are tested according to a specific standard. The method describes the preparation of a variance-length curve, as well as the determination of periodicities of linear density. It also covers the counting of imperfections in the yarn, namely of neps and of thick and thin places.
- Standard10 pagesEnglish languagesale 15% off
This document specifies a gravimetric method and a vibroscope method for the determination of the linear density of textile fibres applicable respectively to: a) bundles of fibres; b) individual fibres. Useful data can be obtained on man-made fibres and, with less precision, on natural fibres. This document only applies to fibres which can be kept straight and, in the case of bundles, parallel, during test preparation. It is properly applicable when the fibres are readily freed of crimp. The methods in this document are not applicable to tapered fibres. The vibroscope method is not always applicable to hollow and flat (ribbon-like) fibres.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
This document specifies a method, using sulfuric acid, to determine the mass percentage of polyamide, after removal of non-fibrous matter, in textiles made of binary mixtures of
— polyamide
with
—polypropylene/polyamide bicomponent.
- Standard12 pagesEnglish languagee-Library read for1 day
This document specifies a method, using formic acid and zinc chloride, to determine the mass percentage of viscose or certain types of cupro or modal or lyocell, after removal of non-fibrous matter, in textiles made of mixtures of - viscose or certain types of the cupro or modal or lyocell fibres with - flax fibres. This document is not applicable to mixtures in which the flax fibre has suffered extensive chemical degradation, nor when the viscose, cupro, modal or lyocell fibre is rendered incompletely soluble by the presence of certain permanent finishes or reactive dyes that cannot be removed completely.
- Standard4 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
This document provides definitions in the field of "smart" textiles and textile products as well as a categorization of different types of smart textiles. It describes briefly the current stage of development of these products and their application potential and gives indications on preferential standardization needs.
- Technical report32 pagesEnglish languagee-Library read for1 day
This document specifies a method, using acetone, to determine the mass percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of - acetate with - wool, animal hair, silk, protein, cotton (scoured, kiered, or bleached), flax (or linen), hemp, jute, abaca, alfa, coir, broom, ramie, sisal, cupro, viscose, modal, polyamide, polyester, polypropylene, acrylic, elastolefin, elastomultiester, melamine, polypropylene/polyamide bicomponent, polyacrylate and glass fibres. It is not applicable to mixtures containing modacrylic fibres, certain chlorofibres, nor to mixtures containing acetate fibres that have been deacetylated on the surface.
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
This document provides definitions in the field of "smart" textiles and textile products as well as a categorization of different types of smart textiles. It describes briefly the current stage of development of these products and their application potential and gives indications on preferential standardization needs.
- Technical report22 pagesEnglish languagesale 15% off
- Technical report23 pagesFrench languagesale 15% off
This document specifies the method and conditions of test for the determination of the breaking force and elongation at break of individual fibres in the conditioned or wet state.
The determination of these fibre properties, when carried out on different kinds of testing equipment, will not generally give identical results. To avoid such differences, this document is restricted to the use of constant-rate-of-extension testing machine.
It is applicable to all fibres, including crimped fibres, provided that the length of fibre available enables the gauge length specified in this document.
NOTE For natural fibres (especially wool and cotton), the breaking test most commonly performed is that of bundles of fibres (see ISO 3060 and IWTO 32‑82).
- Standard20 pagesEnglish languagee-Library read for1 day
- Draft16 pagesGerman languagee-Library read for1 day
This document specifies a method using hot formic acid to determine the mass percentage of melamine fibres after removal of non-fibrous matter, in textiles made of mixtures of:
— melamine fibres
with
— cotton, polypropylene or aramid fibres.
- Standard10 pagesEnglish languagee-Library read for1 day
- Draft7 pagesGerman languagee-Library read for1 day
This document specifies a method, using diluted acetic acid, to determine the mass percentage of chitosan fibres, after elimination of non-fibrous matter, in textiles made of mixtures of:
— chitosan fibre
with
— certain other fibres.
This method is applicable to fibre mixtures of chitosan fibre with cellulose fibres (cotton, linen, ramie, viscose, modal, lyocell), protein fibres (wool, cashmere, silk), or synthetic fibres (polyester, polyamide, acrylic).
- Standard12 pagesEnglish languagee-Library read for1 day
This document specifies a method for determination of triclosan residues in textiles by high performance liquid chromatography - tandem mass spectrometry (HPLC-MS/MS). This method is applicable to all kinds of textile products.
- Standard6 pagesEnglish languagesale 15% off
This document specifies the method and conditions of test for the determination of the breaking force and elongation at break of individual fibres in the conditioned or wet state. The determination of these fibre properties, when carried out on different kinds of testing equipment, will not generally give identical results. To avoid such differences, this document is restricted to the use of constant-rate-of-extension testing machine. It is applicable to all fibres, including crimped fibres, provided that the length of fibre available enables the gauge length specified in this document. NOTE For natural fibres (especially wool and cotton), the breaking test most commonly performed is that of bundles of fibres (see ISO 3060 and IWTO 32‑82).
- Standard12 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This document specifies a test method for the qualification and quantification of organotin compounds. This test method is applicable to all types of materials of textile products.
NOTE CEN/TR 16741 defines which materials are applicable to this determination.
- Standard19 pagesEnglish languagee-Library read for1 day
- Draft15 pagesGerman languagee-Library read for1 day
This document specifies a method, using dimethylformamide, to determine the mass percentage of acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textiles made of mixtures of - acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with - wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, polypropylene, elastomultiester, elastolefin, melamine, polypropylene/polyamide bicomponent, polyacrylate or glass fibres. It is not applicable to animal hair, wool and silk dyed with chromium based mordant dyes. NOTE Dyestuff identification is described in ISO 16373-1.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
This document specifies a method using hot formic acid to determine the mass percentage of melamine fibres after removal of non-fibrous matter, in textiles made of mixtures of: - melamine fibres with - cotton, polypropylene or aramid fibres.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document specifies a method, using sulfuric acid, to determine the mass percentage of silk, after removal of non-fibrous matter, in textiles made of mixtures of - silk with - wool or other animal hair.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document specifies a method, using concentrated sulfuric acid, to determine the mass percentage of chlorofibres and certain other fibres, after removal of non-fibrous material, in textiles made of mixtures of
— cotton, viscose, cupro, modal, lyocell, acetate, triacetate, polyamide, polyester, elastomultiester, certain acrylic and certain modacrylic fibres
with
— chlorofibres (based on homopolymers of vinyl chloride), polypropylene, elastolefin, melamine and polypropylene/polyamide bicomponent.
The modacrylics concerned are those which give a clear solution when immersed in concentrated sulfuric acid.
This method can be used, particularly in place of the methods described in ISO 1833-12 and ISO 1833-13, in all cases where a preliminary test shows that the chlorofibres do not dissolve completely either in dimethylformamide or in the azeotropic mixture of carbon disulfide and acetone.
- Standard11 pagesEnglish languagee-Library read for1 day
- Draft8 pagesGerman languagee-Library read for1 day
- 1 (current)
- 2
- 3
- 4
- 5