SIST EN 1301-1:2008
(Main)Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery
This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy drawn wire for general engineering applications.
It does not apply for aeronautical application.
It applies to drawn wires, except for electrical or welding purposes.
It does not apply to drawing stock.
Aluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 1: Technische Lieferbedingungen
Dieses Dokument legt die Technischen Lieferbedingungen für gezogene Drähte aus Aluminium und Aluminiumlegierungen für allgemeine Anwendungen fest.
Es gilt nicht für Anwendungen in der Luftfahrt.
Es gilt für gezogene Drähte, ausgenommen Drähte für elektrotechnische oder schweißtechnische Anwendungen.
Es gilt nicht für Vordraht.
Aluminium et alliages d'aluminium - Fil étiré - Partie 1: Conditions techniques de contrôle et de livraison
Ce document spécifie les conditions techniques de contrôle et de livraison du fil étiré en aluminium ou en alliage d'aluminium destiné à des applications mécaniques générales.
Il ne s'applique pas aux applications aéronautiques.
Il s’applique aux fils étirés, à l’exception des fils électriques et de soudage.
Il ne s’applique pas aux fils machine.
Aluminij in aluminijeve zlitine - Vlečena žica - 1. del: Tehnični pogoji za prevzem in dobavo
General Information
- Status
- Published
- Publication Date
- 05-Oct-2008
- Technical Committee
- INEK - Nonferrous metals
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 24-Sep-2008
- Due Date
- 29-Nov-2008
- Completion Date
- 06-Oct-2008
Relations
- Effective Date
- 01-Nov-2008
Overview
EN 1301-1:2008 specifies the technical conditions for inspection and delivery of aluminium and aluminium‑alloy drawn wire intended for general engineering applications. The standard excludes aeronautical applications and drawn wire for electrical or welding purposes, and does not apply to drawing stock. It is part of the EN 1301 series and is intended to ensure consistent quality, traceability and clear ordering and testing procedures between manufacturers and purchasers.
Why it matters: EN 1301-1:2008 provides a common contractual and technical reference that reduces supply chain disputes, clarifies inspection and test responsibilities, and supports regulatory and commercial compliance for drawn wire products.
Key Topics
- Scope and exclusions: Applies to drawn wire for general engineering; excludes aeronautical and electrical/welding applications and drawing stock.
- Ordering information: Requires product form, alloy designation (per EN 573-3), temper (per EN 515), dimensions and tolerances (per EN 1301-3), quantity (mass or length), certificates and any special requirements (surface, marking, packaging).
- Production and quality control: Manufacturer is responsible for inspection and tests prior to shipment; purchaser inspection at works must be agreed at order stage.
- Chemical composition and analysis: Chemical composition shall conform to EN 573-3; sampling for melt analysis follows EN 14361.
- Mechanical properties and testing: Mechanical properties are covered in EN 1301-2 or by agreement. Tensile testing is performed per EN 10002-1; sampling and test-piece preparation rules are defined to preserve representative results.
- Freedom from defects and surface finish: Products must be free from defects that impair intended use; superficial imperfection removal is allowed if properties and tolerances are maintained.
- Delivery documentation: Certificate of mass and analysis and an inspection certificate (EN 10204 3.1 by default) listing chemical and mechanical results are required.
- Marking, packaging and complaints: Marking is by agreement; packaging should protect product during transport; a procedure for complaints and non-conformity is provided.
Applications
EN 1301-1:2008 is intended for manufacturers, purchasers and inspectors dealing with:
- General engineering components using aluminium drawn wire
- Procurement contracts where standardized inspection and delivery conditions are required
- Quality assurance and conformity assessment in production and supply chains
Benefits include improved traceability, reduced disputes through standardized documentation, and clearer test and sampling practices.
Related Standards
Key normative references cited by EN 1301-1:2008 include:
- EN 573-3 - Chemical composition and form of wrought aluminium products
- EN 515 - Temper designations for wrought aluminium products
- EN 1301-2 - Drawn wire - Mechanical properties
- EN 1301-3 - Drawn wire - Tolerances on dimensions
- EN 10002-1 - Tensile testing method at ambient temperature
- EN 10204 - Types of inspection documents
- EN 12258-1 and EN 14361 - Terms/definitions and sampling for chemical analysis
For procurement or technical implementation, reference EN 1301-1:2008 alongside the related parts to ensure complete coverage of material, dimensional and mechanical requirements.
Frequently Asked Questions
SIST EN 1301-1:2008 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery". This standard covers: This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy drawn wire for general engineering applications. It does not apply for aeronautical application. It applies to drawn wires, except for electrical or welding purposes. It does not apply to drawing stock.
This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy drawn wire for general engineering applications. It does not apply for aeronautical application. It applies to drawn wires, except for electrical or welding purposes. It does not apply to drawing stock.
SIST EN 1301-1:2008 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1301-1:2008 has the following relationships with other standards: It is inter standard links to SIST EN 1301-1:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1301-1:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GREDYRAluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 1: Technische LieferbedingungenAluminium et alliages d'aluminium - Fil étiré - Partie 1: Conditions techniques de contrôle et de livraisonAluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1301-1:2008SIST EN 1301-1:2008en,fr,de01-november-2008SIST EN 1301-1:2008SLOVENSKI
STANDARDSIST EN 1301-1:19981DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1301-1September 2008ICS 77.150.10Supersedes EN 1301-1:1997
English VersionAluminium and aluminium alloys - Drawn wire - Part 1: Technicalconditions for inspection and deliveryAluminium et alliages d'aluminium - Fil étiré - Partie 1 :Conditions techniques de contrôle et de livraisonAluminium und Aluminiumlegierungen - Gezogene Drähte -Teil 1: Technische LieferbedingungenThis European Standard was approved by CEN on 16 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1301-1:2008: ESIST EN 1301-1:2008
Foreword : amended; Clause 2: EN 12258-1:1998 and EN 14361 added; Clause 3: subclauses 3.1 to 3.9 deleted and replaced by reference to EN 12258-1:1998; Clause 6: subclauses 6.1.2 and 6.1.3 modified; Clause 7: completely revised. EN 1301 comprises the following parts under the general title: "Aluminium and aluminium alloys – Drawn wire": Part 1: Technical conditions for inspection and delivery Part 2 : Mechanical properties Part 3 : Tolerances on dimensions According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...