EN 1301-1:2008

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GREDYRAluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 1: Technische LieferbedingungenAluminium et alliages d'aluminium - Fil étiré - Partie 1: Conditions techniques de contrôle et de livraisonAluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1301-1:2008SIST EN 1301-1:2008en,fr,de01-november-2008SIST EN 1301-1:2008SLOVENSKI
STANDARDSIST EN 1301-1:19981DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1301-1September 2008ICS 77.150.10Supersedes EN 1301-1:1997
English VersionAluminium and aluminium alloys - Drawn wire - Part 1: Technicalconditions for inspection and deliveryAluminium et alliages d'aluminium - Fil étiré - Partie 1 :Conditions techniques de contrôle et de livraisonAluminium und Aluminiumlegierungen - Gezogene Drähte -Teil 1: Technische LieferbedingungenThis European Standard was approved by CEN on 16 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1301-1:2008: ESIST EN 1301-1:2008

 Foreword : amended;  Clause 2: EN 12258-1:1998 and EN 14361 added;  Clause 3: subclauses 3.1 to 3.9 deleted and replaced by reference to EN 12258-1:1998;  Clause 6: subclauses 6.1.2 and 6.1.3 modified;  Clause 7: completely revised. EN 1301 comprises the following parts under the general title: "Aluminium and aluminium alloys – Drawn wire":  Part 1: Technical conditions for inspection and delivery  Part 2 : Mechanical properties  Part 3 : Tolerances on dimensions According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...