SIST EN 13798:2010
(Main)Hydrometry - Specification for a reference raingauge pit
Hydrometry - Specification for a reference raingauge pit
This European Standard specifies the design of a reference raingauge pit. The reference raingauge pit is designed for the liquid precipitation only. The specified details of the pit and the grating, are purposely kept to a minimum in order to allow each raingauge operator latitude in their construction and to suit local conditions.
Hydrometrie - Spezifikation für eine Grube für Referenz- Regenmesser
Diese Europäische Norm legt die Konstruktion einer Grube für Referenz-Regenmesser fest. Die Grube für Referenz-Regenmesser ist nur für flüssigen Niederschlag vorgesehen. Die vorgegebenen Einzelheiten für Grube und Gitterrost sind aus Gründen der Zweckmäßigkeit nicht umfangreich, um jedem Benutzer eines Regenmessers Spielraum beim Bau entsprechend den örtlichen Bedingungen zu lassen.
Hydrométrie - Spécification pour une fosse de référence d'installation d'un pluviomètre
La présente Norme européenne spécifie la conception d’une fosse de référence pour l’installation d’un pluviomètre. Elle est conçue uniquement pour les précipitations sous forme liquide. La fosse et son caillebotis sont volontairement peu détaillés pour laisser toute latitude possible aux exploitants de réseaux pluviométriques dans leurs installations et s’adapter au mieux aux conditions locales.
Hidrometrija - Specifikacija referenčnega jaška za postavitev dežemera
Ta evropski standard določa načrt referenčnega jaška za postavitev dežemera. Referenčni jašek za postavitev dežemera je načrtovan samo za tekoče padavine. Navedeni detajli jaška in rešetk so namenoma na minimalni ravni, da dopuščajo vsakemu operaterju jaška svojo širino pri izgradnji ter da ustrezajo lokalnim pogojem.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HPHUDHydrometrie - Spezifikation für eine Grube für Referenz- RegenmesserHydrométrie - Spécification pour une fosse de référence d'installation d'un pluviomètreHydrometry - Specification for a reference raingauge pit17.120.01VSORãQRMeasurement of fluid flow in general07.060Geologija. Meteorologija. HidrologijaGeology. Meteorology. HydrologyICS:Ta slovenski standard je istoveten z:EN 13798:2010SIST EN 13798:2010en,fr,de01-september-2010SIST EN 13798:2010SLOVENSKI
STANDARDSIST EN 13798:20021DGRPHãþD
SIST EN 13798:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13798
June 2010 ICS 07.060 Supersedes EN 13798:2002English Version
Hydrometry - Specification for a reference raingauge pit
Hydrométrie - Spécification pour une fosse de référence d'installation d'un pluviomètre
Hydrometrie - Spezifikation für eine Grube für Referenz-Regenmesser This European Standard was approved by CEN on 26 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13798:2010: ESIST EN 13798:2010
EN 13798:2010 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Design and construction of the reference raingauge pit .53Design and construction of the grating.54Installation of raingauges .5Bibliography . 12 SIST EN 13798:2010
EN 13798:2010 (E) 3 Foreword This document (EN 13798:2010) has been prepared by Technical Committee CEN/TC 318 “Hydrometry”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13798:2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 13798:2010
EN 13798:2010 (E) 4 Introduction A raingauge pit consists of a pit, normally square in plan and of suitable depth, and a grating, normally of galvanised sheet steel or plastic. Such a pit can contain any suitable type of raingauge. The pit gauge may be used in its own right for improved measurement of rainfall, for wind effects evaluation or for comparison purposes against other reference raingauges.
SIST EN 13798:2010
EN 13798:2010 (E) 5 1 Scope This European Standard specifies the design of a reference raingauge pit. The reference raingauge pit is designed for the liquid precipitation only. The specified details of the pit and the grating, are purposely kept to a minimum in order to allow each raingauge operator latitude in their construction and to suit local conditions.
2 Design and construction of the reference raingauge pit Figures 1 to 6 show the design of the pit, including the required dimensions of the pit and the grating, and the method of installation of the raingauge. The specified dimensions are not critical, but shall be used whenever possible. Variation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.