SIST EN 13798:2002
(Main)Hydrometry - Specification for a reference raingauge pit
Hydrometry - Specification for a reference raingauge pit
This Standard specifies the design of a reference raingauge pit. The specified details of the pit and the grating, are purposely kept to a minimum in order to allow each raingauge operator latitude in their construction and to suit local conditions.
Hydrometrie - Spezifikation für eine Grube für Referenz-Regenmesser
Diese Norm beschreibt die Konstruktion einer Grube für Referenzregenmesser. Die vorgegebenen Einzelheiten für Grube und Gitterrost sind aus Gründen der Zweckmäßigkeit nicht umfangreich, um jedem Benutzer eines Regenmessers Spielraum beim Bau entsprechend den örtlichen Bedingungen zu lassen.
Hydrométrie - Spécification pour une fosse de référence d'installation d'un pluviometre
La présente Norme européenne décrit les principes d'une fosse de référence pour l'installation d'un pluviometre. La fosse et son caillebotis sont volontairement peu détaillés pour laisser toute la latitude possible aux exploitants de réseaux pluviométriques dans leurs installations et s'adapter au mieux aux conditions locales.
Hidrometrija – Specifikacija za referenčni dežemer
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hydrometrie - Spezifikation für eine Grube für Referenz-RegenmesserHydrométrie - Spécification pour une fosse de référence d'installation d'un pluviometreHydrometry - Specification for a reference raingauge pit17.120.01VSORãQRMeasurement of fluid flow in general07.060Geologija. Meteorologija. HidrologijaGeology. Meteorology. HydrologyICS:Ta slovenski standard je istoveten z:EN 13798:2002SIST EN 13798:2002en01-december-2002SIST EN 13798:2002SLOVENSKI
STANDARD
SIST EN 13798:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13798October 2002ICS 07.060English versionHydrometry - Specification for a reference raingauge pitHydrométrie - Spécification pour une fosse de référenced'installation d'un pluviomètreHydrometrie - Spezifikation für eine Grube für Referenz-RegenmesserThis European Standard was approved by CEN on 30 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13798:2002 ESIST EN 13798:2002
EN 13798:2002 (E)2ContentspageForeword.3Introduction.41Scope.42Design and construction of the reference raingauge pit.43Design and construction of the grating.44Installation of raingauges.5Bibliography.8SIST EN 13798:2002
EN 13798:2002 (E)3ForewordThis document (EN 13798:2002) has been prepared by Technical Committee CEN /TC 318 "Hydrometry", thesecretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest byApril 2003According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard : Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13798:2002
EN 13798:2002 (E)4IntroductionA raingauge pit consists of a pit, normally square in plan and up to a maximum of about 1 m in depth, and a grating,normally of galvanised sheet steel or plastic. Such a pit can contain any suitable type of raingauge. The pit gaugemay be used in its own right for improv
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.