iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13798:2010

(Main)

Hydrometry - Specification for a reference raingauge pit

Hydrometry - Specification for a reference raingauge pit

This European Standard specifies the design of a reference raingauge pit. The reference raingauge pit is designed for the liquid precipitation only. The specified details of the pit and the grating, are purposely kept to a minimum in order to allow each raingauge operator latitude in their construction and to suit local conditions.

Hydrometrie - Spezifikation für eine Grube für Referenz-Regenmesser

Diese Europäische Norm legt die Konstruktion einer Grube für Referenz-Regenmesser fest. Die Grube für Referenz-Regenmesser ist nur für flüssigen Niederschlag vorgesehen. Die vorgegebenen Einzelheiten für Grube und Gitterrost sind aus Gründen der Zweckmäßigkeit nicht umfangreich, um jedem Benutzer eines Regenmessers Spielraum beim Bau entsprechend den örtlichen Bedingungen zu lassen.

Hydrométrie - Spécification pour une fosse de référence d'installation d'un pluviomètre

La présente Norme européenne spécifie la conception d’une fosse de référence pour l’installation d’un pluviomètre. Elle est conçue uniquement pour les précipitations sous forme liquide. La fosse et son caillebotis sont volontairement peu détaillés pour laisser toute latitude possible aux exploitants de réseaux pluviométriques dans leurs installations et s’adapter au mieux aux conditions locales.

Hidrometrija - Specifikacija referenčnega jaška za postavitev dežemera

Ta evropski standard določa načrt referenčnega jaška za postavitev dežemera. Referenčni jašek za postavitev dežemera je načrtovan samo za tekoče padavine. Navedeni detajli jaška in rešetk so namenoma na minimalni ravni, da dopuščajo vsakemu operaterju jaška svojo širino pri izgradnji ter da ustrezajo lokalnim pogojem.

General Information

Status
Published
Publication Date
22-Jun-2010
Withdrawal Date
30-Dec-2010
ICS
07.060 - Geology. Meteorology. Hydrology
Technical Committee
CEN/TC 318 - Hydrometry
Drafting Committee
CEN/TC 318/WG 12 - Measurement of rainfall intensity
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
21-Sep-2020
Ref Project
SIST EN 13798:2010 - Hydrometry - Specification for a reference raingauge pit

Relations

Replaces
EN 13798:2002 - Hydrometry - Specification for a reference raingauge pit
Effective Date
08-Jun-2022

Buy Standard

EN 13798:2010EN 13798:2010
PreviousNext
Standard
EN 13798:2010
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HPHUDHydrometrie - Spezifikation für eine Grube für Referenz- RegenmesserHydrométrie - Spécification pour une fosse de référence d'installation d'un pluviomètreHydrometry - Specification for a reference raingauge pit17.120.01VSORãQRMeasurement of fluid flow in general07.060Geologija. Meteorologija. HidrologijaGeology. Meteorology. HydrologyICS:Ta slovenski standard je istoveten z:EN 13798:2010SIST EN 13798:2010en,fr,de01-september-2010SIST EN 13798:2010SLOVENSKI
STANDARDSIST EN 13798:20021DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13798
June 2010 ICS 07.060 Supersedes EN 13798:2002English Version
Hydrometry - Specification for a reference raingauge pit
Hydrométrie - Spécification pour une fosse de référence d'installation d'un pluviomètre
Hydrometrie - Spezifikation für eine Grube für Referenz-Regenmesser This European Standard was approved by CEN on 26 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13798:2010: ESIST EN 13798:2010

2 Design and construction of the reference raingauge pit Figures 1 to 6 show the design of the pit, including the required dimensions of the pit and the grating, and the method of installation of the raingauge. The specified dimensions are not critical, but shall be used whenever possible. Variation
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 17993:2023(Main)
Calibration and accuracy of non-catching precipitation measurement instruments
SIST-TP CEN/TR 17993:2023

Non-catching type gauges are the emerging class of in situ precipitation measurement instruments. For these instruments, rigorous testing and calibration are more challenging than for traditional gauges. Hydrometeors’ characteristics like particle size, shape, fall velocity and density need to be reproduced in a controlled environment to provide the reference precipitation, instead of the equivalent water flow used for catching-type gauges. They are generally calibrated by the manufacturers using internal procedures developed for the specific technology employed. No agreed methodology exists, and the adopted procedures are rarely traceable to internationally recognized standards. This document describes calibration and accuracy issues of non-catching instruments used for liquid/solid atmospheric precipitation measurement. An overview of the existing models of non-catching type instruments is included, together with an overview and a description of their working principles and the adopted calibration procedures. The literature and technical manuals disclosed by manufacturers are summarized and discussed, while current limitations and metrological requirements are identified.

  • Technical report
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17694-1:2023(Main)
Hydrometry - Minimum performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow - Part 1: Open channel instrumentation
SIST EN 17694-1:2023

This document specifies general requirements, minimum performance requirements and test procedures for open channel instrumentation used to determine either volumetric flow-rate and/or total volume passed of waters in artificial open channels. It covers the following technology categories:
- Level sensors with associated electronics designed to be used with a conventional gauging structure. (The requirements and test procedures for gauging structures, such as weirs and flumes, are excluded. The stage discharge characteristics for many of these structures are established and published in national and international standards).
- Water velocity sensors.
- Integrated velocity area instruments comprising level and velocity sensors that may be separate or combined in a single assembly.
- Velocity sensors that determine the mean water velocity through a channel.
It is recognized that for some OCIs, certain tests cannot be carried out.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17694-2:2023(Main)
Hydrometry - Minimum performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow - Part 2: Closed conduit instrumentation
SIST EN 17694-2:2023

This document specifies general requirements, minimum performance requirements and test procedures for instrumentation used to measure either volumetric flow-rate and/or total volume passed of water in closed conduits. It covers all closed conduit instrument (CCI) technologies intended to operate in closed pressurized pipes and partially filled pipes. Requirements are expressed in volumetric units which may be converted to mass using the density of the water.
It is recognized that for some CCIs certain tests cannot be carried out.
The data obtained from the testing of CCIs in accordance with the requirements of the Measuring Instruments Directive [1] or EN ISO 4064-1 [2] can be used to meet, in part, the requirements specified in this document. However, for the avoidance of doubt, compliance with the requirements of this document does not equate to compliance with the requirements of the Measuring Instruments Directive or EN ISO 4064-1.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17909:2023(Main)
Hydrometry - On-site measurement of snow depth and depth of snowfall
SIST-TP CEN/TR 17909:2023

This document defines the requirements for on-site measurements of snow depth and depth of snowfall. This document provides guidance on manual and automatic measuring techniques, and information about sources of errors and measurement uncertainty.

  • Technical report
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17798:2022(Main)
Optimal design of hydrometric networks
SIST-TP CEN/TR 17798:2022

This Technical Report (TR) provides guidance to assist with the planning and design of Hydrometric networks, to ensure a better understanding of the water cycle, and that any data are observed and collated in an effective and appropriate manner. The TR is intended for use when:-
• a new network is being planned and designed;
• the nature, value and extent of an existing network is being reviewed;
• a redundant network is being decommissioned or modified.
This is to ensure that the impacts of these changes are considered objectively, and all changes are adequately monitored and recorded.
This TR covers all aspects that are considered pertinent to the evaluation. The information will be used to inform the decision-making process employed by the network’s owners and operators. The objective nature of the review will ensure that all influential factors, both beneficial and otherwise, are considered. This will ensure that primary and potential alternative uses of the network are considered. It will also ensure compliance with any extant environmental legislation.

  • Technical report
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17277:2019(Main)
Hydrometry - Measurement requirements and classification of rainfall intensity measuring instruments
SIST EN 17277:2019

This document considers liquid atmospheric precipitation and defines the procedures and equipment to perform laboratory and field tests, in steady-state conditions, for the calibration, check and metrological confirmation of liquid precipitation measurement instruments. It provides a classification of catching-type measurement instruments based on their laboratory performance. The classification does not relate to the physical principle used for the measurement, nor does it refer to the technical characteristics of the instrument assembly, but is solely based on the instrument calibration. Attribution of a given class to an instrument is not intended as a high/low ranking of its quality but rather as a quantitative standardized method to declare the achievable measurement accuracy in order to provide guidance on the suitability for a particular purpose, while meeting the user’s requirements.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17171:2018(Main)
Management of observed hydrometric data - Guidance
SIST-TS CEN/TS 17171:2018

This document gives recommendations for the management of observed hydrometric data, including raw data and other data as well as statistics derived from these observations. Although the principles of data management can be applied to all hydrometric observations, particular focus is placed on measurements of precipitation, water level (including stage), volume and discharge in open channels.
NOTE   The range of sites where water levels, and sometimes flow, are measured includes lakes, reservoirs, rivers, canals, tidal waters, sewers, wells, and boreholes.
The document covers metadata associated with hydrometric data, including recommendations for the production and management of descriptive, analytical and statistical material relating to sites where and measuring techniques, by which hydrometric data are collected. The recommendations of this document can be applied to some forms of data directly derived from observational records (for example, summary time series of monthly mean river flows). While not primarily designed for the management of data resulting from more complex numerical models or spatially aggregated data sets (for example, remotely-sensed data), many of the recommendations are applicable for such types of data.
This document does not cover the field collection of data or its transmission, but focuses on the management of data once they have been received in a hydrometric information management system.

  • Technical specification
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16588:2014(Main)
Manual measurement of snow water equivalent
SIST-TP CEN/TR 16588:2014

This Technical Report defines the requirements for manual measurements of SWE over land, see ice and glaciers, under natural environmental conditions, and shows methods for calculating the spatial distribution of the data. It includes measurements with snow tubes, core drills and density cutters.

  • Technical report
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16469:2013(Main)
Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements
SIST-TP CEN/TR 16469:2013

This Technical Report describes a method for calibrating rainfall intensity (RI) gauges and the measurement requirements to obtain accurate and compatible data sets from hydro-meteorological networks, as a forerunner to the development of full hydro-meteorological data collection standards.
This Technical Report deals exclusively with catching-type RI gauges (see Clause 3). It concentrates on the generic calibration, performance checking and estimation of uncertainties for RI gauges. It does not cover specific gauge measurement principles, technical characteristics and technology adopted in the design of RI gauges.

  • Technical report
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 15996:2010(Main)
Hydrometry - Measurement of snow water equivalent using snow mass registration devices
SIST-TP CEN/TR 15996:2010

This Technical Report defines the requirements for the use of snow mass registration devices for measurement of SWE under natural environmental conditions. It includes weighing and pressure measuring methods.

  • Technical report
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day