SIST EN 1567:2000
(Main)Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
This European Standard specifies dimensions, materials and performance requirements (including methods of test) for Water Pressrue Reducing Valves and Combination Pressure Reducing Valves, of nominal size from DN 8 to DN 100, for inlet pressures that do not exceed 1,6 MPa (16 bar) and a temperature that does not exceed 30°C for cold water application and 80°C for hot water application. Except when stated otherwise by the manufacturer, the valves can be mounted in any orientation.
Gebäudearmaturen - Druckminderer und Druckmindererkombinationen für Wasser - Anforderungen und Prüfungen
Diese Europäische Norm legt Abmessungen, Werkstoffe und Prüfanforderungen (einschließlich Prüfmethoden) für Druckminderer und Druckmindererkombinationen von DN 8 bis DN 100 für einen Eingangsdruck der 1,6 MPa (16 bar) und für eine Temperatur die 30°C für Kaltwasser-Einsatz und 80°C für Warmwasser-Einsatz nicht überschreitet. Falls vom Hersteller nicht anders angegeben, können diese Armaturen in jeder beliebigen Einbaulage eingebaut werden.
Robinetterie de bâtiment - Réducteurs de pression d'eau et réducteurs de pression d'eau combinés - Exigences et essais
La présente norme a pour objet de définir les dimensions, les matériaux, les performances ainsi que les méthodes d'essais pour les Réducteurs de Pression d'eau ainsi que les Réducteurs de Pression d'eau Combinés, de dimension nominale DN 8 à DN 100, pour des pressions d'entrée n'excédant pas 1,6 Mpa (16 bar) et une température d'eau ne dépassant pas 30°C pour les versions eau froide et 80°C pour les versions eau chaude. Sauf spécifications particulières du fabricant, ces appareils peuvent être montés dans n'importe quelle position.
Ventili v stavbah - Reducirni in kombinirani reducirni ventili - Zahteve in preskusi
General Information
- Status
- Published
- Publication Date
- 31-Oct-2000
- Technical Committee
- IOVO - Water supply and waste water engineering
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Nov-2000
- Due Date
- 01-Nov-2000
- Completion Date
- 01-Nov-2000
- Directive
- 89/106/EEC - Construction products
Overview
EN 1567:1999 (adopted as SIST EN 1567:2000) is a European Standard from CEN that defines requirements and test methods for building valves-specifically water pressure reducing valves and combination pressure reducing valves. The standard covers valves of nominal sizes DN 8 to DN 100 intended for water supply systems with inlet pressures up to 1.6 MPa (16 bar). Temperature limits are ≤ 30°C for cold water and ≤ 80°C for hot water. Unless the manufacturer states otherwise, valves covered by this standard may be mounted in any orientation.
Key Topics
- Scope and classification: Applies to water pressure reducing valves and combination pressure reducing valves used in building water supply systems (ICS: 91.140.60, 23.060.40).
- Dimensions and nominal sizes: Requirements for valves from DN 8 to DN 100 to ensure interchangeability and correct sizing.
- Materials: Specification of acceptable materials (metallic and non‑metallic) suitable for potable water and thermal conditions described in the scope.
- Performance requirements: Limits for inlet pressure (≤ 1.6 MPa / 16 bar), temperature conditions (cold ≤ 30°C, hot ≤ 80°C), flow and control stability expectations.
- Test methods: Standardised tests to verify pressure reduction performance, leakage, durability and compliance with material and dimensional requirements.
- Installation orientation: Permits any mounting orientation except where the manufacturer provides alternative guidance.
Applications and Who Uses It
EN 1567 is intended for practical use in:
- Manufacturers of water pressure reducing and combination valves to design products that meet European requirements.
- Specifiers and consultants (plumbing and building services engineers) selecting pressure regulators for commercial and residential buildings.
- Installers and contractors ensuring correct valve selection for system pressures and temperatures.
- Test laboratories and certification bodies executing the standardised test methods for conformity assessment.
- Building owners and facilities managers wanting durable, compliant pressure control solutions for water supply, protection of fixtures, and pressure management in multi‑storey buildings.
Practical applications include domestic plumbing, commercial buildings, HVAC and fire water supplies where consistent downstream pressure and equipment protection are required.
Related Standards (if applicable)
- EN 1567 is part of the family of building valves and pressure regulator standards published by CEN. For complete compliance and system design, users should consider other relevant European standards for valve flanges, testing procedures and potable water materials adopted in their jurisdiction.
Keywords: EN 1567:1999, water pressure reducing valves, combination pressure reducing valves, building valves, pressure regulators, DN 8 to DN 100, 1.6 MPa, 16 bar, hot water 80°C, CEN.
Frequently Asked Questions
SIST EN 1567:2000 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests". This standard covers: This European Standard specifies dimensions, materials and performance requirements (including methods of test) for Water Pressrue Reducing Valves and Combination Pressure Reducing Valves, of nominal size from DN 8 to DN 100, for inlet pressures that do not exceed 1,6 MPa (16 bar) and a temperature that does not exceed 30°C for cold water application and 80°C for hot water application. Except when stated otherwise by the manufacturer, the valves can be mounted in any orientation.
This European Standard specifies dimensions, materials and performance requirements (including methods of test) for Water Pressrue Reducing Valves and Combination Pressure Reducing Valves, of nominal size from DN 8 to DN 100, for inlet pressures that do not exceed 1,6 MPa (16 bar) and a temperature that does not exceed 30°C for cold water application and 80°C for hot water application. Except when stated otherwise by the manufacturer, the valves can be mounted in any orientation.
SIST EN 1567:2000 is classified under the following ICS (International Classification for Standards) categories: 23.060.40 - Pressure regulators; 91.140.60 - Water supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1567:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 93/38/EEC; Standardization Mandates: M/BC/CEN/88/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 1567:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ventili v stavbah - Reducirni in kombinirani reducirni ventili - Zahteve in preskusiGebäudearmaturen - Druckminderer und Druckmindererkombinationen für Wasser - Anforderungen und PrüfungenRobinetterie de bâtiment - Réducteurs de pression d'eau et réducteurs de pression d'eau combinés - Exigences et essaisBuilding valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests91.140.60Sistemi za oskr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...