Amendment 1 - Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods

Describes successively the general qualification process, the qualification procedures and methods to be used and the associated documentation. Is applicable to electrical equipment of safety systems used in nuclear power plants.

Amendement 1 - Appareils électrodomestiques et analogues - Sécurité - Partie 2-99: Règles particulières pour les hottes de cuisine électriques à usage commercial

Décrit successivement le processus général de qualification, les procédures et méthodes de qualification à utiliser ainsi que la documentation associée. Est applicable aux équipements électriques des systèmes de sûreté utilisés dans les centrales nucléaires.

General Information

Status
Published
Publication Date
18-Jun-2017
Current Stage
DELPUB - Deleted Publication
Completion Date
12-Nov-2021
Ref Project

Relations

Buy Standard

Standard
IEC 60335-2-99:2003/AMD1:2017 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods
English and French language
18 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60335-2-99 ®
Edition 1.0 2017-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
A MENDEMENT 1
Household and similar electrical appliances – Safety –
Part 2-99: Particular requirements for commercial electric hoods

Appareils électrodomestiques et analogues – Sécurité –
Partie 2-99: Règles particulières pour les hottes de cuisine électriques à usage
commercial
IEC 60335-2-99:2003-02/AMD1:2017-06(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales, électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes langues additionnelles. Egalement appelé Vocabulaire
Android et iPad. Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC 65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte, et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées. antérieures extraites des publications des CE 37, 77, 86 et

CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Restez informé sur les nouvelles publications IEC. Just Service Clients - webstore.iec.ch/csc
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 60335-2-99 ®
Edition 1.0 2017-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
A MENDEMENT 1
Household and similar electrical appliances – Safety –

Part 2-99: Particular requirements for commercial electric hoods

Appareils électrodomestiques et analogues – Sécurité –

Partie 2-99: Règles particulières pour les hottes de cuisine électriques à usage

commercial
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.040.20 ISBN 978-2-8322-4269-8

– 2 – IEC 60335-2-99:2003/AMD1:2017
© IEC 2017
FOREWORD
This amendment has been prepared by IEC technical committee 61: Safety of household and
similar electrical appliances.
The text of this amendment is based on the following documents:
FDIS Report on voting
61/5366/FDIS 61/5394/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 12 months or later than 36 months from the date of publication.

_____________
1 Scope
Add the following at the end of the first paragraph:
The following extraction systems are covered as well:
• back draft ventilation systems;
• downdraft ventilation systems;
• fume extraction modules.
Add, in the second paragraph, the words, “and similar”, after the words, “….not intended for
household”, to read:
“…not intended for household and similar use,…”.
Replace Note101 by the following:

© IEC 2017
NOTE 101 Hoods are used for example in kitchens of restaurants, canteens, hospitals and in commercial
enterprises such as bakeries, butcheries, etc.
In Note 102, add the following dashed item:
– for hoods incorporating a filter system with means for ionizing the air, IEC 60335-2-65 also applies.
2 Normative references
Replace the existing text by the following:
This clause of Part 1 is applicable except as follows.
Addition:
ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1:
Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread
ISO 3506-1, Mechanical properties of corrosion-resistant stainless steel fasteners – Part 1:
Bolts, screws and studs
ISO 3506-2, Mechanical properties of corrosion-resistant stainless steel fasteners – Part 2:
Nuts
ISO 3506-3, Mechanical properties of corrosion-resistant stainless steel fasteners – Part 3:
Set screws and similar fasteners not under tensile stress
ISO 3506-4, Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4:
Tapping screws
3 Definitions
Replace the title of Clause 3 but not the clause number by the following:
Terms and definitions
3.101 Replace the term definition and notes as follows:
motor-operated appliance intended to collect and remove contaminated air from catering
appliances
Note 1 to entry: The contaminated air may pass through filter systems and be discharged back into the room or
removed from the room.
7 Marking and instructions
7.6 Delete this subclause.
7.12 Replace the last paragraph of the addition by the following:
The instructions shall include the substance of the following:
These appliances are intended to be used for commercial applications, for example in
kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries,
butcheries, etc., but not for continuous mass production of food.

– 4 – IEC 60335-2-99:2003/AMD1:2017
© IEC 2017
If the manufacturer wants to limit the use of the appliance to less than the above, this has to
be clearly stated in the instructions.
Modification:
The instructions concerning persons (including children) with reduced physical, sensory or
mental capabilities or lack of experience and knowledge and children playing with the
appliance are not applicable.
7.12.1 Add to the last sentence of the second paragraph “or a steam cleaner”.
Add the following new subclause:
7.12.9 Not applicable.
11 Heating
11.2 Replace the text as follows:
11.2 Replacement:
Hoods are operated in accordance with the manufacturer’s instructions.
Hoods intended to be placed above a hob are installed so that the distance between their
lowest point and the hob surface is the minimum distance specified in the instructions for
installation. The hob selected for the test shall have uniformly arranged gas burners with a
total heat input equal to 30 kW/m of the gross area (width times depth) of the hood. Vessels
containing water are placed without lids on the gas burners, which are operated to maintain
boiling. The diameters or sizes of the vessels are approximately equal to that of the cooking
zones.
Other hoods are operated in the most severe conditions according to the manufacturer’s
instructions.
Hoods intended to be used in combination with other appliances are tested in combination
with the other appliance in normal operation. Hoods that are not interlocked with the
appliance are also tested with the appliance in operation and the fan switched off.
Hoods are placed in a test corner as follows:
– hoods normally fixed to a wall are fixed to one of the walls, as near to the other wall and
floor or ceiling as is likely to occur, taking into account the instructions;
– hoods normally fixed to a ceiling are fixed to the ceiling as near to the walls as is likely to
occur, taking into account the instructions;
– other hoods are placed as near to the walls as possible.
Dull black-painted plywood approximately 20 mm thick is used for the test corner.
Hoods intended to be used in combination with other appliances are placed as required for
the appliance.
13 Leakage current and electric strength at operating temperature
13.2 Replace the text of the modification by the following:

© IEC 2017
Instead of the permissible leakage current for stationary class I appliances, the following
applies:
– for cord and plug connected appliances 0,75 mA or 1 mA per kW rated power input
of the appliance with a maximum of 10 mA,
whichever is higher.
– for other appliances 0,75 mA or 1 mA per kW rated power input
of the appliance with no maximum, whichever
is higher.
For portable class I appliances, instead of the permissible leakage current, the following
applies:
– for cord and plug connected appliances 0,75 mA or 1 mA per kW rated power input
of the appliance with a maximum of 10 mA,
whichever is higher.
15 Moisture resistance
Delete Subclause 15.3 and replace the text by the following:
This clause of Part 1 is applicable.
16 Leakage current and electric strength
16.2 Replace the text of the modification by the following:
Instead of the permissible leakage current for stationary class I appliances, the following
applies:
– for cord and plug connected appliances 0,75m A or 1 mA per kW rated power input
of the appliance with a maximum of 10 mA,
whichever is higher;
– for other appliances 0,75 mA or 1 mA per kW rated power input
of the appliance with no maximum, whichever
is higher.
For portable class I appliances, instead of the permissible leakage current, the following
applies:
– for cord and plug connected appliances 0,75 mA or 1 mA per kW rated power input
of the appliance with a maximum of 10 mA,
whichever is higher.
19 Abnormal operation
19.101 Replace the existing text as follows:
Hoods intended to be placed above a hob are operated as specified in 11.2, but without
vessels and with all gas burners switched on.
20 Stabi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.