EN ISO 14509-1:2008

SLOVENSKI STANDARD
01-december-2008
1DGRPHãþD
SIST EN ISO 14509:2001
SIST EN ISO 14509:2001/A1:2004
Mala plovila - Merjenje zvoka v zraku, ki ga oddajajo motorizirana rekreacijska
plovila - 1. del: Postopki merjenja pri vožnji mimo (ISO 14509-1:2008)
Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by
measurement procedures (ISO 14509-1:2008)
Kleine Wasserfahrzeuge - Von motorgetriebenen Sportbooten abgestrahlter Luftschall -
Teil 1: Vorbeifahrtmessungen (ISO 14509-1:2008)
Petits navires - Bruit aérien émis par les bateaux de plaisance motorisés - Partie 1:
Méthodes de mesure pour l'essai de passage (ISO 14509-1:2008)
Ta slovenski standard je istoveten z: EN ISO 14509-1:2008
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
47.080 ýROQL Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 14509-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2008
ICS 17.140.30; 47.080 Supersedes EN ISO 14509:2000
English Version
Small craft - Airborne sound emitted by powered recreational
craft - Part 1: Pass-by measurement procedures (ISO 14509-
1:2008)
Petits navires - Bruit aérien émis par les bateaux de Kleine Wasserfahrzeuge - Von motorgetriebenen
plaisance motorisés - Partie 1: Méthodes de mesure pour Sportbooten abgestrahlter Luftschall - Teil 1:
l'essai de passage (ISO 14509-1:2008) Vorbeifahrtmessungen (ISO 14509-1:2008)
This European Standard was approved by CEN on 24 August 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14509-1:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3
Annex ZA (informative)  Relationship between this International Standard and the Essential
Requirements of EU Directive 94/25/EC as amended by 2003/44/EC.4

Foreword
This document (EN ISO 14509-1:2008) has been prepared by Technical Committee ISO/TC 188 "Small craft"
in collaboration with Technical Committee CEN/SS T01 “Shipbuilding and maritime structures” the secretariat
of which is held by CMC.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the
latest by April 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14509:2000.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive.
For relationship with EC Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 14509-1:2008 has been approved by CEN as a EN ISO 14509-1:2008 without any
modification.
Annex ZA
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 94/25/EC as amended by 2003/44/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
to provide one means of conforming to Essential Requirements of the New Approach Directive 94/25/EC as
amended by Directive 2003/44/EC.

Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a
presumption of conformity with the corresponding Essential Requirements of that Directive and associated
EFTA regulations.
Table ZA.1 — Correspondence between this International Standard and Directive 94/25/EC as
amended by 2003/44/EC
Clause(s)/sub-clause(s) of Essential requirements (ERs) of EU Qualifying remarks/Notes
this International Standard Directive 94/25/EC as amended by
2003/44/EC
All clauses Annex 1.C, Essential requirements for ISO 14509-1 defines a boat pass-
noise emissions Clause 1.1 by test for measurement of noise
emissions of recreational craft

WARNING: Other requirements and other EU Directives may be applicable to the products falling within the
scope of this standard.
INTERNATIONAL ISO
STANDARD 14509-1
First edition
2008-10-01
Small craft — Airborne sound emitted
by powered recreational craft —
Part 1:
Pass-by measurement procedures
Petits navires — Bruit aérien émis par les bateaux de plaisance
motorisés —
Partie 1: Méthodes de mesure pour l'essai de passage

Reference number
ISO 14509-1:2008(E)
©
ISO 2008
ISO 14509-1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved

ISO 14509-1:2008(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references. 1
3 Terms and definitions. 1
4 Symbols. 3
5 Measurement quantity. 3
6 Measurement uncertainty. 3
7 Measuring equipment. 5
8 Test site specifications and environmental conditions. 5
9 Test course, microphone positions and measurement distance . 6
10 Operating conditions. 8
11 Test procedure. 9
12 Test report. 9
13 Standard craft specifications for outboard motor type tests according to Clause 10 . 10
14 Standard craft specifications for type tests for stern drives with integral exhaust systems
according to Clause 10. 11
Annex A (normative) Measurement of the sound exposure level. 12
Annex B (informative) Example of test report form . 16
Bibliography . 18

Figures
Figure 1 — Position of the microphone and test course. 7
Figure 2 — Microphone position and heights. 7
Tables
Table 1 — Standard deviation of reproducibility of individual sources of measurement. 4
Table 2 — Variability for a coverage probability of 90 %. 4
Table 3 — Correction for background sound pressure level, L″ , for monitoring tests. 6
pAS
Table 4 — Standard craft specifications . 10
Table 5 — Standard craft specifications for petrol engines. 11
Table 6 — Standard craft specifications for diesel engines. 11
Table A.1 — Standard deviation of reproducibility of individual sources of measurement. 12
Table A.2 — Variability for a coverage probability of 90 % . 13
Table A.3 — Correction for background sound exposure level, L″ , for monitoring tests . 14
AE
ISO 14509-1:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14509-1 was prepared by Technical Committee ISO/TC 188, Small craft.
This first edition of ISO 14509-1 cancels and replaces ISO 14509:2000, which has been technically revised. It
also incorporates the Amendment ISO 14509:2000/Amd.1:2004.
ISO 14509 consists of the following parts, under the general title Small craft — Airborne sound emitted by
...